Anyone knew what issue will be if the caps on red is not installed, as i missing it when cleaning the point.
Install is success and in fact now my kids playing on it. Only issue is touch screen is not working, it was working before of course. Any clue?
hey guys any of you have use the waveshare rp2040-tyni , im looking for the rgb point , and a review of how good this alternative fits on the v2 switch . https://www.waveshare.com/product/rp2040-tiny.htm
Just got an update from seller of RP2040Tiny "thanks for your order, but sorry to tell you that RP2040-Tiny-Kit has small quality problem, factory has recalled the products and reproduce. it need about another 1 month."
And now my wait begins...
Post automatically merged:
From the guide: "might be caused by not cleaned flux, bad soldering, lack of resistors, too long wires or too thin wires"
Had the same situation 3 days ago (on V1 unpatched switch). One additional 47R resistor on dat0 line solved the problem.
Maybe it was the wire (38awg single core) but I was too lazy to swap the wire so I tried the resistor first and it worked.
Thanks for the advice! I was too lazy too and just moved the wires a little bit, then the OFW started and the error was gone. Now im getting the 200mb error only when i open Console Log twice ( on the first error its still 400), but booting OFW works flawlessly. I will add the resistor today and hope this will fix the problem completely then
There is a hole in kapton, but light is definitely cyan as it's not working, I tried to add 20k resistor on rst and nothing changed, except ofw stops working(without resistor it's loads fine). Well, then will try to solder two mosfets, as i resolder one around 3 or 4 times already with same result.
There is a hole in kapton, but light is definitely cyan as it's not working, I tried to add 20k resistor on rst and nothing changed, except ofw stops working(without resistor it's loads fine). Well, then will try to solder two mosfets, as i resolder one around 3 or 4 times already with same result.
You can also try a different mosfet like IRF8788, IRF8714. they are bigger and they would eliminate any doubt you might have with soldering on those points.
hello all, do you know what is the problem with this swich v2? it cannot boot cfw and ofw and shown as the picture below.
thanks. View attachment 371486
Shows the photo of the green light (or video), so we could help to identify.
Lot of people misidentified cyan for green light, especially after kapton taping the led.
At first I'm using 0.1mm wires which worked on my previous switch using picofly but on this switch I have to switch to 0.25mm coppwr enamelled wire and two mosfet. Because on one mosfet it show blue and than Cyan. But with two mosfet picofly shows Green light after Blue but proceed to OFW. Or is it because I'm using a long wire for a CLK, CMD and Dat0 ?
( Sorry For My Bad English)
hey guys any of you have use the waveshare rp2040-tyni , im looking for the rgb point , and a review of how good this alternative fits on the v2 switch . https://www.waveshare.com/product/rp2040-tiny.htm
According to the Waveshare website, shorting the pins inside the red circle should be the same as shorting the "RGB/BGR" pins on the 2040-Zero
Also, you won't find many people who have installed a Tiny yet, let alone wrote a review yet, because it JUST released AND has backorders due to the mistake they made with resistors.
At first I'm using 0.1mm wires which worked on my previous switch using picofly but on this switch I have to switch to 0.25mm coppwr enamelled wire and two mosfet. Because on one mosfet it show blue and than Cyan. But with two mosfet picofly shows Green light after Blue but proceed to OFW. Or is it because I'm using a long wire for a CLK, CMD and Dat0 ?
( Sorry For My Bad English)
View attachment 371498
According to the Waveshare website, shorting the pins inside the red circle should be the same as shorting the "RGB/BGR" pins on the 2040-Zero
Also, you won't find many people who have installed a Tiny yet, let alone wrote a review yet, because it JUST released AND has backorders due to the mistake they made with resistors.
After several months of work, the Harbour Masters 64 team have released their first public build of 2Ship2Harkinian, a feature-rich Majora's Mask PC port. This comes...
With the vast success of Super Mario Maker and its Switch sequel Super Mario Maker 2, Nintendo fans have long been calling for "Maker" titles for other iconic genres...
It's been a while since Microsoft released the Xbox One, and despite its age, there haven't been any reliable softmod methods to hack the console. Until now. A post...
Palmer Luckey is known for his pursuits into the world of virtual reality, having founded Oculus and designed the Rift VR headset. Prior to the $2 billion dollar...
Ubisoft has today officially revealed the next installment in the Assassin's Creed franchise: Assassin's Creed Shadows. This entry is set in late Sengoku-era Japan...
Another day, another Nintendo DMCA takedown against fan-made content.
Just a few minutes ago, Nintendo issued a DMCA takedown notice against a widely known and...
Another day, another great emulator that makes its way into the Apple Store for more users to enjoy. With Apple opening its store up to videogame emulators earlier...
After a little more than three years of exclusivity with the Epic Games Store, Square Enix has decided to bring their beloved Kingdom Hearts franchise to Steam. The...
Sony is once more attempting to reintroduce players to their older library of games by re-releasing classic PlayStation 2 titles onto the PlayStation Store. During...
Skyward Sword is a divisive title in the Zelda series. Hailed with praise at launch with a 93 Metacritic average, the game since received criticism for the...
Palmer Luckey is known for his pursuits into the world of virtual reality, having founded Oculus and designed the Rift VR headset. Prior to the $2 billion dollar...
After several months of work, the Harbour Masters 64 team have released their first public build of 2Ship2Harkinian, a feature-rich Majora's Mask PC port. This comes...
Another day, another Nintendo DMCA takedown against fan-made content.
Just a few minutes ago, Nintendo issued a DMCA takedown notice against a widely known and...
It's been a while since Microsoft released the Xbox One, and despite its age, there haven't been any reliable softmod methods to hack the console. Until now. A post...
Ubisoft has today officially revealed the next installment in the Assassin's Creed franchise: Assassin's Creed Shadows. This entry is set in late Sengoku-era Japan...
After a little more than three years of exclusivity with the Epic Games Store, Square Enix has decided to bring their beloved Kingdom Hearts franchise to Steam. The...
Sony is once more attempting to reintroduce players to their older library of games by re-releasing classic PlayStation 2 titles onto the PlayStation Store. During...
With the vast success of Super Mario Maker and its Switch sequel Super Mario Maker 2, Nintendo fans have long been calling for "Maker" titles for other iconic genres...
The latest State of Play is here. This is PlayStation's Summer showcase, providing updates to new updates on upcoming games and brand new reveals. The 35-minute...
E3 may be gone, but it's not forgotten, as the trend of a massive Summer video game showcase still lives on in the form of the Summer Game Fest. Promising two hour of...
Man we were gonna have a game night at my buddy's house but he wasn't feeling great so he canceled, which throws my dinner plans up into the air, so I guess it's time to order a pizza or something