DLC issue when patching fixed with v0.78. Either way you need latest version for the DLCs. The ones I posted before.
Got 'em. Thanks for the update.
Do I need to use the RSV patch? If so, what keygen version?
DLC issue when patching fixed with v0.78. Either way you need latest version for the DLCs. The ones I posted before.
If they work it shouldn't be affecting them. Specially if you didn't patch them while building.Does 0.78 affect "already packed dlcs" XCIs?Thanks.
No, for that game yo don't need that. Just get the correct dlc since you're using the latest update.Got 'em. Thanks for the update.
Do I need to use the RSV patch? If so, what keygen version?
They can use dz-tinfoil to install them. They'll need to activate unsign code first probably or they can use rommenu the installer that is actually SX OS installer and ReiNX included for a while. It's just an issue with old tinfoil, though I believe some of the oldest versions worked with those multi-nsp.Made a custom smash nsp with updates and dlc and people are reporting it doesn't work on anything but SX OS
Why is this and is there any way to make it work on all cfws?
Thanks
Ah, sorry I forgot Same with the files I've put a dot this time, normally I try to avoid them but sometimes I slip.Thanks for the 0.78 update.
I prefered _ instead of . the file-name but that's your new decision, just like the . in the txt-file-names ^^
Ah, good to know, that explains it. So it should be easy for them to fix it, but they didn't so far.So one thing I realized in the latest days for icons not showing in SX OS loader\installer. They will if you lower keygeneration to 5, it seems the use embedded keys in the installer to read the icon, version,... but forgot to embed the new masterkey 4 and 5 wich is causing that issue.
Lowering the keygeneration doesn't mean you can't run them in 6.2, of course it just means the system will use a lower masterkey to decrypt the games.
Yep, dunno why they didn't realize it, maybe it was a freelance job. Either way the SX Installer from the video will support those nsp fine, though I'd be better for them to add those keys so icons show in new xci files without modification.Ah, good to know, that explains it. So it should be easy for them to fix it, but they didn't so far.
Dunno, probably since hashes between partitions are reduced or lack of update partition. Funny thing is they told me it they work with n1dus wich should be a direct port of zerotwoxcihow come I can't install your custom .xci files using this? each one fails to install https://gbatemp.net/threads/team-2168-zerotwoxci-the-xci-installer.518171/
For the future restore mode wich will probably in next release, or at least next big release. Though i'll change the format to only store cnmt.nca, ticket and cert. I came with another way of doing it so I could even let you do the titlerights restoration with a titlerights-titlekey database if you have access to it.What's the small zip file left in the folder with the rebuilt xci file?
Yep it seems they redid nslaunchtitle in 6.0 and is not reengineered yet so that's why it can't launch xci beyond 5.X but if anyone downgrade to 5.1 they change keygeneration to 5 and make xci that work with it, unless they really have dependencies from 6.0 (Stardew valley update, Bendy update, conduct together...) Let's hope they re-engineered the launchtitle it would be a nice alternative to SX launcherBy the way: the SX-Installer v1.0 is out now
NBA 2k19 goes above 32gb. There aren't 64gb cartridges in the market currently or flags in the SDK so it won't work. Not sure if the limitation is actually in Horizon current capabilities or in SX OS code. The error is kinda the same as before they released they 32gb cartridges patch.Another question - I merged Mario Tennis XCI and it's NSP update, into a new XCI. When this new hybrid XCI is loaded into Switch Backup Manager or XCI Explorer, etc, it's recognised just fine as Mario Tennis Aces. It works perfectly when launched in SX OS on my Switch, and the game reports the correct latest version of 2.1.1, so the update being inserted into the XCI worked.
I then did the same thing with NBA 2K19 XCI and NSP. This time, however, Switch Backup Manager won't recognise the resulting XCI, and XCI Explorer throws and error when trying to open it. Any ideas?
UPDATE: Finished copying NBA 2K19 to my SD card - SX OS sees the XCI (but with no icon), and can load it ok (loads into Switch home menu WITH icon) but I get an error when I try to launch it
UPDATE2: Actually just did an md5 check against the XCI file on my SD versus the one output by NSC Builder and there's a mismatch, so I'm copying it over again to try again.
UPDATE3: Nope, still error on launch - error 2002-3005
NBA 2k19 goes above 32gb. There aren't 64gb cartridges in the market currently or flags in the SDK so it won't work. Not sure if the limitation is actually in Horizon current capabilities or in SX OS code. The error is kinda the same as before they released they 32gb cartridges patch.
Added to important notes in first post.
Yep already said so and added it to the notes is a SX launcher issue.Thanks for that answer, explains it.
Any idea why some games don't have an icon after building XCI?
myself said:So one thing I realized in the latest days for icons not showing in SX OS loader\installer. They will if you lower keygeneration to 5, it seems the use embedded keys in the installer to read the icon, version,... but forgot to embed the new masterkey 4 and 5 wich is causing that issue.
Lowering the keygeneration doesn't mean you can't run them in 6.2, of course it just means the system will use a lower masterkey to decrypt the games.
Nope, LA Noire was the other one but added delta skippin because of it initially, wich was better since deltas are not needed inside xci files. The update had like 8gb of deltas.From the hundred or so games I have, it seems to me NBA 2K19 is the only one that will go above 32GB when XCI and updates and DLC are combined. Anyone aware of any others?
They do as keygeneration 5, at least for me. I didn't try without changing the keygeneration actually. I can try.Smash and latest update not working, it did work with the old update tho.
Works fine for me in auto, I just tested it. Did you change something in the config?Any chance of adding an option to not place the output file in a folder?
--------------------- MERGED ---------------------------
Also auto-mode doesn't work if you drag/drop XCI files onto the .bat file. NSP files work fine this way, but for XCI you need to use manual mode
Thinking about it? Did you use the update mode to generate the new xci?Smash and latest update not working, it did work with the old update tho.
I don't even know what that keygeneration 5 is, where is that setting? I used work with multi pack option.They do as keygeneration 5, at least for me. I didn't try without changing the keygeneration actually. I can try.
--------------------- MERGED ---------------------------
Works fine for me in auto, I just tested it. Did you change something in the config?
About the option, yes I'm thinking about adding a folder for the zips and recover the inline option. I kinda want to work in the restoration mode first though.
--------------------- MERGED ---------------------------
Thinking about it? Did you use the update mode to generate the new xci?
I went and tested making one usig last release with my single xci + latest update and is working for me, I used keygeneration 5 and it even works using 5.X.