I have a problem with my jailbreak Nintendo switch OLED I pressed reboot on hakate and then normal. So now I'm stuck in that mod and I need help to go back into atmosphere
Nope it still reboot in to that modPowering off, then powering back on should bring you to Hekate. Then launch atmosphere through the launch option on the Hekate main menu.
If I power off and hold volume up it just reboot into the samepower off then hold volume up and tap power you should see hekate if not try both volume buttons
if I hold volume up and down I go into recoveIf I power off and hold volume up it just reboot into the same
Yes it flash Blue and then yellowdo you see the chip flashing when you power up?
recheck DAT0 point and then reflash the chipYes it flash Blue and then yellow
How to do reflash the Chip is it like taking out and put it backrecheck DAT0 point and then reflash the chip
is it solid yellow or does it flash?Yes it flash Blue and then yellow
It flash Blue and then two times yellowis it solid yellow or does it flash?
The Dat0 could be disconected.
put new firmware onto itHow to do reflash the Chip is it like taking out and put it back
its trying to glitch the consoleIt flash Blue and then two times yellow
Post automatically merged:
what happens if you take the sd card out and boot?It flash Blue and then two times yellow
Post automatically merged:
Nothing just boots it too this modewhat happens if you take the sd card out and boot?
I know but how can I help him?put new firmware onto it
its trying to glitch the console
The mod chip isnt working/not glitching, I take it you didnt install the chip as you are unsure how to re-flash it (it requires opening your switch) your best option is to get in touch with the person who installed the chip or failing that open it up and try to fix the issue if you are tech savy. To re-flash the chip you will need the usb flex attachment and connect it to yout pc.Nothing just boots it too this mode
Post automatically merged:
I know but how can I help him?
So as I understand the Chip is not working properly and I need the Chip to be reflash?The mod chip isnt working/not glitching, I take it you didnt install the chip as you are unsure how to re-flash it (it requires opening your switch) your best option is to get in touch with the person who installed the chip or failing that open it up and try to fix the issue if you are tech savy. To re-flash the chip you will need the usb flex attachment and connect it to yout pc.
yesSo as I understand the Chip is not working properly and I need the Chip to be reflash?
So as I understand the Chip is not working properly and I need the Chip to be reflash?
well that was lucky .... don't drop it againThank you all for trying to help me. I think I drop it and it started working