Hacking NOOB PARADISE - ask away

[SebasTheFish]

Installed install CIOS v52 into slots 249 and 250. After launching a wii game backup and exiting to wii menu, opening the Homebrew Channel causes a black screen.

 

[XFlak]

A good Idea.

Or,like our ModMii Fan Number One @XFlak says:

Use ModMii.
https://gbatemp.net/threads/modmii-for-windows-official-support-topic.207126/

Thank you.

Let's get one thing straight, I may be ModMii's creator and promoter... but I think the position of ModMii Fan Number One is reserved for you! Lol

Installed install CIOS v52 into slots 249 and 250. After launching a wii game backup and exiting to wii menu, opening the Homebrew Channel causes a black screen.

CIOS v52? You mean d2x v10 beta 52? What base did you use? Should ideally be base 57 to slot 249. Please post a Syscheck

 

[Prunebutt]

Hello.

Do you know,do you have PRIILOADER installed ?

Thank you.

I'm pretty sure I don't. At least I can't remember installing it and I guess I would notice if I did. (is there an easy way to find out? ; )

But let's say I haven't. xD

 

[Alexander1970]

I'm pretty sure I don't. At least I can't remember installing it and I guess I would notice if I did. (is there an easy way to find out? ; )

But let's say I haven't. xD

Thank you.

If NO then it is not so good.

With the PRIILOADER you can also boot into Applications/Homebrew Channel and so on.
But most important,you can check and maybe "correct" an maybe "broken" or not correct working Forwarder/Channel.it seems someting of this Kind is not ok on your Wii that BootMii can NOT boot into Homebrew Channel.

But maybe an other Reason why it not boots is your SD Card for Example.
Maybe an old Homebrew Channel Version.It should be v1.1.2
Or you have an "older" BootMii Version.Please check it on the INFO Icon.It should be v1.5

But without going further than the Safety and Health Screen it is hard to tell.Maybe it is a good Idea if you have your Wii Motion Controller back.

Thank you.

 

[XFlak]

I'm pretty sure I don't. At least I can't remember installing it and I guess I would notice if I did. (is there an easy way to find out? ; )

But let's say I haven't. xD

Hold the reset button immediately as soon as the wii begins the boot up process

 

[Alexander1970]

Hold the reset button immediately as soon as the wii begins the boot up process

Ah,the Master is here for a Visit:

I can not acces PRIILOADER when BootMii (installed as boot2) is active.....

Thank you.

 

[Prunebutt]

Thanks XFlak. No, I don't have Priiloader. Pressing reset makes BootMii immediately go to the system menu, or rather the Health & Safety Notice.

Also, BootMii is version 1.1 (as I said: I modded the thing eons ago). Can I update by placing something on the SD Card? I'm never quite sure, what's on the Wii NAND and what's on the SD card.

 

[Alexander1970]

Thanks XFlak. No, I don't have Priiloader. Pressing reset makes BootMii immediately go to the system menu, or rather the Health & Safety Notice.

Ah,the Master is here for a Visit:

I can not acces PRIILOADER when BootMii (installed as boot2) is active.....

Thank you.

Maybe you have it installed too...

 

[Prunebutt]

Maybe you have it installed too...

... so... I should try the reset button when my SD card isn't inserted? Did I get that right?

 

[Alexander1970]

... so... I should try the reset button when my SD card isn't inserted? Did I get that right?

Yes please.

 

[Prunebutt]

Yes please.

Nope, not installed. It goes straight to the Health & Safety screen.

 

[Alexander1970]

Nope, straight to the Health & Safety screen.

You can download the latest Version of the Priiloader v0.8.2 and put it on the SD Card and and run the installer from BootMii please.

But maybe this does not work.


Maybe you also need updated IOS60/61 or 80 before if your Wii is an lower Version then 4.x.Thats my Concern of your SD Card that I mentioned before.If you use an SDHC Card it does not work without that IOSes.
Maybe you also need an updated IOS58 before,if your Wii´s System Version is lower than 4.3x and you did not installed the latest Version of it.


You maybe should get your Wii Motion Controller back to make it the "easy" Way and go to the Homebrew Channel via the Wii´s System Menu.

- HackMii installer (with Letterbomb or Wiibrand,this depends on your Wii System Version).
- re-install/update the Homebrew Channel to 1.1.2
and
- install PRIILOADER



I think a sysCheck from your Wii is a good Idea.
https://gbatemp.net/threads/posting-a-system-check.300279/

And then we can see,what we have on your Wii.

Thank you.

 

[XFlak]

You can launch the hackmii installer via bootmini.elf (saved to the SD card) from bootmii, hit the SD button from the bootmii main menu and browse for the mini file and select it. It will start the hackmii installer and from there u can upgrade/(re)install the HBC and bootmii

Also, if u had priiloader installed, from the bootmii boot2 menu, launch the system menu and continue holding reset and it would load if installed. Sounds like it's not installed though.

Edit: digging through your old msg's I see your main issue is that u don't currently have access to a wiimote. The above will likely need one to work.

You could update the version of bootmii saved to your sd card without a wiimote and it MAY allow u to launch the HBC from bootmii, it depends on what version of bootmii you have and what version of the HBC you have installed. The title ID for bootmii changed a few times and if you're running an older version of bootmii it won't be able to find newer versions of the HBC.

Ultimately, this would be a lot easier with a wiimote at your disposal to update your mods.

Here's bootmii v1.2 sd card files. V1.5 can only be generated by the latest hackmii installer (it's not hosted anywhere by the dev team like they've done for v1.2 via this link) http://static.hackmii.com/bootmii_sd_files.zip

 

[Prunebutt]

[...]
Here's bootmii v1.2 sd card files. V1.5 can only be generated by the latest hackmii installer (it's not hosted anywhere by the dev team like they've done for v1.2 via this link) http://static.hackmii.com/bootmii_sd_files.zip

Great! These actually worked! I was able to boot into the Homebrew-launcher! Thanks a lot!!

Now, I should be able to install the latest BootMii version with the current Hackmii-installer, right? Also, I can install Priiloader (and since I can't edit the network settings in the Homebrew-Launcher, I need to install the installers via SD-Card, right?)

 

[SebasTheFish]

Let's get one thing straight, I may be ModMii's creator and promoter... but I think the position of ModMii Fan Number One is reserved for you! Lol


CIOS v52? You mean d2x v10 beta 52? What base did you use? Should ideally be base 57 to slot 249. Please post a Syscheck

I have two CIOSs installed:

• cIOS 249 base 57 v10 beta52
• cIOS 250 base 57 v10 beta52

Here's syscheck:

SysCheck HDE v2.4.0 HacksDen Edition by JoostinOnline, Double_A, R2-D2199, and Nano
...runs on IOS58 (rev 6176).
Region: NTSC-U
System Menu 4.3U (v513)
Drive date: 02.13.2007
Homebrew Channel 1.1.2 running on IOS58
Hollywood v0x11
Console Type: Wii
Shop Channel Country: United States (49)
Boot2 v4
Found 89 titles.
Found 46 IOS on this console. 15 of them are stubs.
IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 256): Stub
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 512): Stub
IOS17 (rev 1032): No Patches
IOS20 (rev 256): Stub
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 2816): Stub
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3608): No Patches
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 5120): Stub
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 6400): Stub
IOS61 (rev 5662): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 6912): Stub
IOS80 (rev 6944): No Patches
IOS222 (rev 65280): Stub
IOS223 (rev 65280): Stub
IOS249[57] (rev 65535, Info: d2x-v10beta52): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 65535, Info: d2x-v10beta52): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65280): Stub
BC v6
MIOS v10

 

[FrenezyFr]

The cIOS 250 must be installed with the base 56.
You will also need to install bootmii and Priiloader

 

[SebasTheFish]

The cIOS 250 must be installed with the base 56.
You will also need to install bootmii and Priiloader

BootMii was installed via letterbomb in boot2, also what will priiloader do?

 

[godreborn]

I believe priiloader as boot2 can fix bricks, but it's been years since I've messed with the wii.

 

[SebasTheFish]

Installed install CIOS v52 into slots 249 and 250. After launching a wii game backup and exiting to wii menu, opening the Homebrew Channel causes a black screen.

So what modifications should allow me to relaunch hbc after quiting a game backup?

 

[FrenezyFr]

Priiloader est une sécurité contre les briques, permet d'utiliser des hacks, comme bloquer la mise à jour des jeux ainsi que les mises à jour en lignes, supprimer la protection des sauvegardes, déplacer la chaîne disque et j'en passe ... pour protéger votre hack Priiloader est fortement conseillé mème si vous avez bootmii en boot 2.