Hacking NOOB PARADISE - ask away

[XFlak]

Hi, this is me again. last week I tried ModMii and looked at the options there. And I need confirmation from the seniors here.

previous

For which choice should I choose? My Wii is Korean (K) but the system menu is USA (3.2U).

Spoiler: U or K version?

Is it okay to do default System Menu upgrade from 3.2U to unofficial 4.1?

Spoiler: to be or not to be upgrade?

Thank you.

tell modmii u r starting at 3.2U and you want to upgrade to 4.1U (or 4.2u or 4.3u is fine too). Note that ModMii will have you install the official system menu, but a modified system menu IOS will accompany it. If you were to conduct a full official wii menu update from Nintendo you will get a 003 brick. But ModMii installs a system menu IOS that is compatible with all consoles and all system menu versions to avoid this. This is done for all consoles just in case someone has a Korean wii that was region changed and they don't know it. So basically even though you aren't telling modmii that your wii was region changed from Korean you don't have to, by default it takes precautions to guard against this scenario

 

[Ironbass]

OK, so here are the results after my WiiMod Lite Wad installation...

Thanks in advance for any help provided !

Ironbass

Spoiler

SysCheck HDE v2.4.0 HacksDen Edition by JoostinOnline, Double_A, R2-D2199, and Nano
...runs on IOS58 (rev 6176).

Region: NTSC-U
System Menu 4.3U (v513)
Priiloader installed
Drive date: 02.13.2007
Homebrew Channel 1.1.2 running on IOS58

Hollywood v0x11
Console ID: 73533425
Console Type: Wii
Shop Channel Country: Canada (18)
Boot2 v4
Found 225 titles.
Found 52 IOS on this console. 3 of them are stubs.

IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 16174): Trucha Bug, NAND Access
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 1032): No Patches
IOS20 (rev 16174): Trucha Bug, NAND Access
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 16174): Trucha Bug, NAND Access
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3608): No Patches
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 16174): Trucha Bug, NAND Access
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 16174): Trucha Bug, NAND Access
IOS51 (rev 4864): Stub
IOS52 (rev 16174): Trucha Bug, NAND Access
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 16174): Trucha Bug, NAND Access
IOS61 (rev 5662): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 16174): Trucha Bug, NAND Access
IOS80 (rev 16174): Trucha Bug, NAND Access
IOS202[60] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS222[38] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223[38+37] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224[57] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS236[36] (rev 65535, Info: rev 3351): Trucha Bug, ES Identify, NAND Access
IOS247[57] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS248[56] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS249[57] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS250[56] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS251[58] (rev 65535, Info: d2x-v10beta52): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v10
Report generated on 06/15/2020.

Spoiler

Thanks in advance for any help provided !

Ironbass

 

[XFlak]

Looks good. You have some unnecessary cios's but it doesn't hurt anything, all the contents of the slots that are typically used look good. Your problem disappear?

 

[Ironbass]

Well, as far as the machine not loading the start menu, all this seems to be ok now... But I got a problem I didn't have before...

My console can't connect to my USB drive anymore... It says it's not detected all of a sudden...

Any help would be really appreciated!

Spoiler

Spoiler

Looks good. You have some unnecessary cios's but it doesn't hurt anything, all the contents of the slots that are typically used look good. Your problem disappear?

Thanks.

Ironbass

 

[XFlak]

Try updating your USB loader. Modmii can help with that too.

If u want the start menu back disable the applicable priiloader hack

 

[Ironbass]

Try updating your USB loader. Modmii can help with that too.

If u want the start menu back disable the applicable priiloader hack

No the start menu seems OK... it loaded every time I tried it after my WiiMod Lite Wad installation... Seems all good there...THANKS !

I will try updating the USB loader...

Will let you know... Fingers crossed !

Ironbass

 

[Ironbass]

Hi there !

I am running ModMii to update the USB GX Loader and I was wondering if I was using the right options for this...

I already have a partitioned drive that worked well with games via USB before... I believe it is WBFS Fat 32... (When I plug it in to my computer, ''Properties'' tells me it is formatted ''FAT32'' ... So I guess option 5...

Then, I selected 1 for USB Loader GX (which is what I was using to open games on my USB HD before by the way...) so option 1...

Then I am not sure what to select... I know that my SD card was not needed before to launch USB Loader GX, so I suppose option ''USB''...

Then it says to enter the drive (path) letter to save files for my USB hard drive... I am really unsure what to choose here... Do I have to connect my already partitioned USB drive with all my games to my computer and specify it as destination in ModMii ? I always just added games using WiiBackupManager_Build78 to my USB drive, so I don't want to wreck anything... Unknown territory here...

Thanks in advance for any help and information !

Ironbass

 

[Alexander1970]

Hello.

Hi there !

I am running ModMii to update the USB GX Loader and I was wondering if I was using the right options for this...

I already have a partitioned drive that worked well with games via USB before... I believe it is WBFS Fat 32... (When I plug it in to my computer, ''Properties'' tells me it is formatted ''FAT32'' ... So I guess option 5...

Then, I selected 1 for USB Loader GX (which is what I was using to open games on my USB HD before by the way...) so option 1...

Then I am not sure what to select... I know that my SD card was not needed before to launch USB Loader GX, so I suppose option ''USB''...

Then it says to enter the drive (path) letter to save files for my USB hard drive... I am really unsure what to choose here... Do I have to connect my already partitioned USB drive with all my games to my computer and specify it as destination in ModMii ? I always just added games using WiiBackupManager_Build78 to my USB drive, so I don't want to wreck anything... Unknown territory here...

Thanks in advance for any help and information !

Ironbass

Excuse me,if this was asked already:
Is the USB Device/HDD connected to Port 0 please ?



And did your HDD have an Power Supply too ?

Thank you.

 

[D-an-W]

Morning folks, just dusted off the Wii for my daughter to play with and wanted to get it up to date.

It is actually fitted with TWO mod chips, an external socket (Running YAOSM v3.2 currently) and a CycloWiz internally.

Last night I updated the Homebrew Channel ok and I am going to go through everything on the SD Card backup I made a while back and update all the apps.

Am I able to update the system to 4.3 (Think its on 4.1 at the moment) safely?

 

[Ironbass]

Hello.



Excuse me,if this was asked already:
Is the USB Device/HDD connected to Port 0 please ?

View attachment 213537

And did your HDD have an Power Supply too ?

Thank you.

HAHAHA !!!

I don't know how I've done this, but it looks like I plugged it in the wrong USB when troubleshooting...

I just tried it and my CFG loaded on first trial !

My hard drive is a AC plugable one, so there is only one USB cable..

So I will try to get some time to test everything, but I think that my problems are solved !!!

Major THANKS to all who took the time to help me out ! I love this place !

Ironbass

 

[jeannotte]

Morning folks, just dusted off the Wii for my daughter to play with and wanted to get it up to date.

It is actually fitted with TWO mod chips, an external socket (Running YAOSM v3.2 currently) and a CycloWiz internally.

Last night I updated the Homebrew Channel ok and I am going to go through everything on the SD Card backup I made a while back and update all the apps.

Am I able to update the system to 4.3 (Think its on 4.1 at the moment) safely?

Hello,

Post a syscheck report here, please ==>https://gbatemp.net/threads/posting-a-system-check.300279/

then we will guide you for the best

 

[D-an-W]

Hello,

Post a syscheck report here, please ==>https://gbatemp.net/threads/posting-a-system-check.300279/

then we will guide you for the best

Hi, just ran the report and attached the info below. Thanks for the help (Not sure if you need the log file too?).

Spoiler

SysCheck HDE v2.4.0 HacksDen Edition by JoostinOnline, Double_A, R2-D2199, and Nano
...runs on IOS58 (rev 6175).

Region: PAL
System Menu 4.1E (v450)
Priiloader installed
Drive date: 05.26.2006
Homebrew Channel 1.1.2 running on IOS58

Hollywood v0x11
Console ID: 67834547
Console Type: Wii
Shop Channel Country: United Kingdom (110)
Boot2 v2
Found 110 titles.
Found 27 IOS on this console. 0 of them are stubs.

IOS9 (rev 1034): No Patches
IOS12 (rev 525): No Patches
IOS13 (rev 1031): No Patches
IOS14 (rev 1031): No Patches
IOS15 (rev 1031): No Patches
IOS17 (rev 1031): No Patches
IOS21 (rev 1038): No Patches
IOS22 (rev 1293): No Patches
IOS28 (rev 1806): No Patches
IOS31 (rev 3608): No Patches
IOS33 (rev 3607): No Patches
IOS34 (rev 3607): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3607): Trucha Bug, ES Identify, NAND Access, Beer Ticket
IOS37 (rev 5662): No Patches
IOS38 (rev 4123): No Patches
IOS53 (rev 5662): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5918): No Patches
IOS58 (rev 6175): USB 2.0
IOS60 (rev 6174): Trucha Bug
IOS61 (rev 5661): No Patches
IOS236 (rev 65535): Trucha Bug, ES Identify, NAND Access, Beer Ticket
IOS249[56] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v10
Report generated on 06/17/2020.

I'm loving ModMii, having a look round and loaded my SysCheck.csv

Spoiler

According to your sysCheck log the following files are required
in order to update your softmod.

The following 39 files will be downloaded to "COPY_TO_SD":

1) IOS11v16174(IOS60v6174[FS-ES-NP-VP-DIP])
2) IOS20v16174(IOS60v6174[FS-ES-NP-VP-DIP])
3) IOS30v16174(IOS60v6174[FS-ES-NP-VP-DIP])
4) IOS40v16174(IOS60v6174[FS-ES-NP-VP-DIP])
5) IOS50v16174(IOS60v6174[FS-ES-NP-VP-DIP])
6) IOS52v16174(IOS60v6174[FS-ES-NP-VP-DIP])
7) IOS60v16174(IOS60v6174[FS-ES-NP-VP-DIP])
8) IOS70v16174(IOS60v6174[FS-ES-NP-VP-DIP])
9) IOS80v16174(IOS60v6174[FS-ES-NP-VP-DIP])
10) Multi-Mod Manager (MMM) v13.4
11) IOS12
12) IOS13
13) IOS14
14) IOS15
15) IOS17
16) IOS21
17) IOS22
18) IOS28
19) IOS33
20) IOS34
21) IOS36v3608
22) IOS37
23) IOS38
24) IOS41
25) IOS43
26) IOS45
27) IOS46
28) IOS48
29) IOS53
30) IOS57
31) IOS58
32) IOS61
33) IOS62
34) cIOS249[57]-d2x-v8-final
35) cIOS250[56]-d2x-v8-final
36) cIOS222[38]-v4
37) cIOS223[37-38]-v4
38) cIOS202[60]-v5.1R
39) cIOS224[57]-v5.1R

Begin Downloading now?

     Y = Yes, Generate Guide and Begin Downloading
     G = Generate Guide Only

     S = Save Download Queue

     B = Back
     M = Main Menu

 

[D-an-W]

I just ran the update built by ModMii, here are the results...

SysCheck

Spoiler

SysCheck HDE v2.4.0 HacksDen Edition by JoostinOnline, Double_A, R2-D2199, and Nano
...runs on IOS58 (rev 6176).

Region: PAL
System Menu 4.1E (v450)
Priiloader installed
Drive date: 05.26.2006
Homebrew Channel 1.1.2 running on IOS58

Hollywood v0x11
Console ID: 67834547
Console Type: Wii
Shop Channel Country: United Kingdom (110)
Boot2 v2
Found 128 titles.
Found 45 IOS on this console. 0 of them are stubs.

IOS9 (rev 1034): No Patches
IOS11 (rev 16174): Trucha Bug, NAND Access
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS17 (rev 1032): No Patches
IOS20 (rev 16174): Trucha Bug, NAND Access
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 16174): Trucha Bug, NAND Access
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3608): No Patches
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 16174): Trucha Bug, NAND Access
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 16174): Trucha Bug, NAND Access
IOS52 (rev 16174): Trucha Bug, NAND Access
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 16174): Trucha Bug, NAND Access
IOS61 (rev 5662): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 16174): Trucha Bug, NAND Access
IOS80 (rev 16174): Trucha Bug, NAND Access
IOS202[60] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS222[38] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223[38+37] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224[57] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 65535): Trucha Bug, ES Identify, NAND Access, Beer Ticket
IOS249[57] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS250[56] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v10
Report generated on 06/17/2020.

ModMii SU Output...

Spoiler

According to your sysCheck log your Wii's softmods are up to date.

My boot2 is still v2, is that because I am on 4.1 still?

Is it worth updating to 4.3?

What should I backup now to best protect the system?


Thanks in advance!

 

[XFlak]

Looks good. You can make a fresh nand backup using bootmii otherwise nothing else to do unless you want to tinker with sneek & set up an emulated nand, modmii can help w this too

 

[D-an-W]

Thanks, I noticed ModMii created MMMConfig.txt for the root of the SD Card with this content...

AutoLoadIOS=236

Do I need to edit the one thats already there as it has the following...

StartupPath=/wad
AutoLoadIOS=249
FatDevice=sd

Looks good. You can make a fresh nand backup using bootmii otherwise nothing else to do unless you want to tinker with sneek & set up an emulated nand, modmii can help w this too

Regarding bootmii, is the resolution fixed as I think when I tried yesterday my new AVR didn't like it and would not show the screen?


Think I found the reason why...

# BootMii config file
# Created by bootmii config editor

# Video mode, possible settings:
# NTSC, PAL50, PAL60, PROGRESSIVE
VIDEO=PROGRESSIVE

# Autoboot, possible settings:
# SYSMENU, HBC
AUTOBOOT=SYSMENU
BOOTDELAY=5

 

[D-an-W]

Got BootMii running in the correct resolution and created a NAND backup, don't recall seeing this many ECC Failures but I guess it is getting on a bit now (44 ECC, 4 Factory)!

I also remembered how to run Priiloader which is on v0.5 (Beta 4), the update doesn't want to work but I see v0.9 - Beta 4 is most recent.

Does anyone have a compiled version as I can't get onto the website?

 

[noobita]

Hi guys its night here and I have some question, thank you.

my post tracking

I just receive my sd card parcel from china (yes I disinfect the parcel with alcohol 90%) and I successfuly run the syscheck

Okay, after finishing ModMii for windows I get the guide, is it okay to skip guide number 1 which is "Installing The Homebrew Channel (HBC) and Bootmii" because I already have HBC or is it okay to re-do the hack?

Spoiler: My SysCheckHDE

SysCheck HDE v2.4.0 HacksDen Edition by JoostinOnline, Double_A, R2-D2199, and Nano
...runs on IOS36 (rev 1042).

Region: NTSC-U (original region: KOR)
System Menu 3.2U (v289)

Could not detect the drive date!
Homebrew Channel 1.0.1 running on IOS36

Hollywood v0x11
Console ID: 81274144
Console Type: Wii
Shop Channel Country: United States (49)
Boot2 v3
Found 171 titles.
Found 25 IOS on this console. 1 of them are stubs.

IOS4 (rev 259): Stub
IOS9 (rev 518): No Patches
IOS11 (rev 10): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS12 (rev 6): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS13 (rev 10): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS14 (rev 257): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS15 (rev 257): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 512): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS20 (rev 12): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS21 (rev 519): ES Identify
IOS22 (rev 772): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS28 (rev 1288): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS30 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS31 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS33 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS34 (rev 1039): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS35 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS36 (rev 1042): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS37 (rev 2070): ES Identify
IOS40 (rev 2321): ES Identify
IOS41 (rev 2320): ES Identify
IOS43 (rev 2320): ES Identify
IOS45 (rev 2320): ES Identify
IOS249 (rev 10): Trucha Bug, ES Identify, Flash Access, NAND Access, USB 2.0
IOS250 (rev 65535): Trucha Bug, ES Identify, Flash Access, NAND Access, USB 2.0
BC v2
MIOS v5
Report generated on 12/26/2018.

Spoiler: Cheaper from China Including Free SHipping and Tax free

Spoiler: unfamiliar sd card brand but they work fine

 

[Deleted User]

After installing a usb loader gx forwarder and changing settings to return to usb loader gx on exit, usb loader gx hangs on initializing usb device. I think that there may be a problem when patching ios 58.

Hi
I am a bit late to the conversation but whatever
I have the same problem. I have read through the other replies and it seems no-body has encountered this (somewhat temporary) fix.
When plugging my hard drive through usb to my pc and running:

'chdsk (Letter of drive, in my case -->)G: /f'

with cmd, i receive a reassuring: there are no problems and therefore no fixes were needed.
Despite this, when launching with USB Loader GX straight away (port 0), It launches straight through without freezing.
The Downside is, when you fully power off the Wii, meaning no power to the drive, it returns to the normal freezing state.

I am looking into this but I'm unsure what causes this problem when exiting/powering off.

I have also used a non-forwarder version and seems to be ok.


Conclusion:
Issue occurs only with newer forwarder revisions
Despite which loader IOS used (I've tried 58 and 249)
(Only) Resetting the Wii keeps the fix
However powering off loses it
And is caused every time usb loader is used(opened/closed/powered off)

I hope this helps
Thanks


Edit:
I did some research and apparently USB 3.0 doesn't do too well with the Wii...
This could be another issue [Probably outdated Hardware issue].
Not much I can do.

Edit 2:
Permanently fixed by removing the hard drive from the USB 3.0 device and putting it in the old USB 2.0.
I guess the Wii or USB loader just doesn't support USB 3.0 very well. USB 2.0 is fine

 

[jeannotte]

Hi guys its night here and I have some question, thank you.

my post tracking

I just receive my sd card parcel from china (yes I disinfect the parcel with alcohol 90%) and I successfuly run the syscheck

Okay, after finishing ModMii for windows I get the guide, is it okay to skip guide number 1 which is "Installing The Homebrew Channel (HBC) and Bootmii" because I already have HBC or is it okay to re-do the hack?

Spoiler: My SysCheckHDE

SysCheck HDE v2.4.0 HacksDen Edition by JoostinOnline, Double_A, R2-D2199, and Nano
...runs on IOS36 (rev 1042).

Region: NTSC-U (original region: KOR)
System Menu 3.2U (v289)

Could not detect the drive date!
Homebrew Channel 1.0.1 running on IOS36

Hollywood v0x11
Console ID: 81274144
Console Type: Wii
Shop Channel Country: United States (49)
Boot2 v3
Found 171 titles.
Found 25 IOS on this console. 1 of them are stubs.

IOS4 (rev 259): Stub
IOS9 (rev 518): No Patches
IOS11 (rev 10): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS12 (rev 6): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS13 (rev 10): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS14 (rev 257): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS15 (rev 257): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 512): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS20 (rev 12): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS21 (rev 519): ES Identify
IOS22 (rev 772): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS28 (rev 1288): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS30 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS31 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS33 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS34 (rev 1039): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS35 (rev 1040): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS36 (rev 1042): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS37 (rev 2070): ES Identify
IOS40 (rev 2321): ES Identify
IOS41 (rev 2320): ES Identify
IOS43 (rev 2320): ES Identify
IOS45 (rev 2320): ES Identify
IOS249 (rev 10): Trucha Bug, ES Identify, Flash Access, NAND Access, USB 2.0
IOS250 (rev 65535): Trucha Bug, ES Identify, Flash Access, NAND Access, USB 2.0
BC v2
MIOS v5
Report generated on 12/26/2018.

Spoiler: Cheaper from China Including Free SHipping and Tax free

Spoiler: unfamiliar sd card brand but they work fine

Hello,

Use the syscheck CSV file with Modmii, it should update your hack.

But considering your syscheck report, you have this console version ==> Region: NTSC-U (region of origin: KOR)

For the region of origin KOR of your wii ==> Wait for the opinion of XFflak, for Modmii, it will tell you exactly what it will be necessary to do with Modmii.

 

[noobita]

Thanks @jeannotte I try to understand what you say by "using syscheck csv file with modmii" I see modmii menu again and again but couldnt find the option to make modmii read syscheck csv file i dont understand it until i googled and found this post

Spoiler: found this post

its basically drag and drop order hahaha i am so noob and it work i got modmii decide the best update for me by reading syscheck csv file

Spoiler: modmii decide what to update automatically simply by drag and drop syscheck csv to modmii.exe

wow thanks to the creator

okay i am reading the guide again and i will ask here if there is some thing i dont understand thank you all

my post tracking