Fizeau

Adjust the color of the screen of your Nintendo Switch.

Features:

• Modify the color temperature of the display.
• Filter colors to one single component.
• Apply color corrections: gamma, luminance, and color range.
• Control the screen backlight brightness.
• Schedule settings to be applied to dusk/dawn time, with smooth transitions.

Installation:
Download the latest zip from the release page, unzip it to the root of your sd card (be careful to merge and not overwrite folders), and reboot.
Only the latest version of the Atmosphère CFW is supported.
If you want to use the overlay, you will need to set up Tesla (install Tesla-Menu and ovlloader). This isn't supported on firmware versions prior to 9.0.0.

Supported firmwares:
All firmares are expected working. The software was tested working on 1.0.0, 2.0.0, 6.0.0 and 10.1.0. If you encounter an issue running this on a particular version, please create an issue.
Settings:

• Settings are saved at /switch/Fizeau/config.ini, which you can also edit.
• To reduce the memory usage of the sysmodule, settings are not read continually. Instead, they are applied on application launch. Thus, you will need to launch the client after a reboot to restart Fizeau.

Spoiler: Images

Link: https://github.com/averne/Fizeau/

 

[averne]

I don't know if this depends on how I update Fizeau (HB App Store), let me know if it does.
Can the /config/Fizeau/config.ini not be bundled with the releases? Each time I update Fizeau, my configuration is reset (luckily I have a backup in a different folder). Perhaps you could do something like Atmosphere, i.e. bundle a config_template.ini so that config.ini is not overwritten when you update.

Just put your config in sdmc:/switch/Fizeau/config.ini. This one takes precedence over sdmc:/config.

 

[SkullHex2]

I'm getting a crash when:

• I start charging the console while in sleep mode
• I stop charging the console while in sleep mode

in both cases, the crash occurs some time (60 seconds) after plugging the charger in

it was very cumbersome to narrow it down because the log doesn't point directly at Fizeau's direction.
Log and config attached.

 

[jnl1]

I'm getting a crash when:

• I start charging the console while in sleep mode
• I stop charging the console while in sleep mode

in both cases, the crash occurs some time (60 seconds) after plugging the charger in

it was very cumbersome to narrow it down because the log doesn't point directly at Fizeau's direction.
Log and config attached.

Same for me. I always have to set fizeau to inactive in teslay overlay before charging my switch in sleep mode. If I forget this the console will crash.

 

[averne]

I'm getting a crash when:

• I start charging the console while in sleep mode
• I stop charging the console while in sleep mode

in both cases, the crash occurs some time (60 seconds) after plugging the charger in

it was very cumbersome to narrow it down because the log doesn't point directly at Fizeau's direction.
Log and config attached.

Thanks for the report, I was aware of the crash in docked mode but not this one. I'll try to reproduce this one and fix it, hopefully it will fix the docked issue as well.

 

[averne]

I'm getting a crash when:

• I start charging the console while in sleep mode
• I stop charging the console while in sleep mode

in both cases, the crash occurs some time (60 seconds) after plugging the charger in

it was very cumbersome to narrow it down because the log doesn't point directly at Fizeau's direction.
Log and config attached.

I've been able to reproduce this crash. Turns out the reason why I never encountered it during my testing is because I have "Wake When AC Adapter is Disconnected" on. So when I (dis)connect the cable, the screen turns on and no crash happens.
I'll try to come up with a fix in the coming days, in the meantime you can enable this option.

 

[averne]

I've been able to reproduce this crash. Turns out the reason why I never encountered it during my testing is because I have "Wake When AC Adapter is Disconnected" on. So when I (dis)connect the cable, the screen turns on and no crash happens.
I'll try to come up with a fix in the coming days, in the meantime you can enable this option.

Since it appears that the issue tracking this crash on github was deleted, I reupload the tentatively fixed builds here.
Please report any issue, if none arise, I will do a release in a couple days.

 

[jnl1]

What´s the difference between the "..chl..." and non-chl version?

 

[averne]

What´s the difference between the "..chl..." and non-chl version?

chl version applies settings at boot time, whereas for non-chl version you need to open a client (overlay or application)

 

[jnl1]

sadly I still got the error (2165-1001 (0x7d2a5)) when leaving fizeau active and charging my switch via dock in sleep mode, even with the new version Fizeau-2.4.2-19a25f5.
And it got even worse. Now I have "a fatal error occurred when running Atmosphère. Program ID: 01000000000000f12, Error Des: sdt::abort () called (0xffe)" after restarting atmosphere...

 

[Medel87]

Since it appears that the issue tracking this crash on github was deleted, I reupload the tentatively fixed builds here.
Please report any issue, if none arise, I will do a release in a couple days.

Now I have not this problem, but now when I unlock switch docked, signal to TV don't work, I need to put it unlocked on dock to have image on TV

 

[Deetlemore]

Weirdly enough, I haven't had any more crashing with the dirty update. Using the non-chainloader version, on HOS 17.0.1 AMS 1.6.2. It's worked in handheld, docked, and swapping between them. There must be something unique to either my Switch, or others' Switches that determines if a crash will occur.

 

[sean222]

Testing now - will report back on Saturday.

 

[averne]

sadly I still got the error (2165-1001 (0x7d2a5)) when leaving fizeau active and charging my switch via dock in sleep mode, even with the new version Fizeau-2.4.2-19a25f5.
And it got even worse. Now I have "a fatal error occurred when running Atmosphère. Program ID: 01000000000000f12, Error Des: sdt::abort () called (0xffe)" after restarting atmosphere...

Please try the hekate archive bit fixer, or as a last resort reformatting your sd. You're the only one getting crashes from the sysmodule itself.

 

[sean222]

Testing now - will report back on Saturday.

I have not had any crashes! I've been playing/charging/sleeping my device several times for varying amounts of time over the past two days as well.
Your fix looks good, thank you!

 

[averne]

I have not had any crashes! I've been playing/charging/sleeping my device several times for varying amounts of time over the past two days as well.
Your fix looks good, thank you!

Thanks for the confirmation. To thise having issues, please check your setup first (binary files, archive bits, sd corruption), then if you are still having problems provide some info about your setup (hardware, etc)

 

[ShidoNyu]

How can I have Fizeau active when starting atmosphere?

 

[hippy dave]

How can I have Fizeau active when starting atmosphere?

chl version applies settings at boot time, whereas for non-chl version you need to open a client (overlay or application)

Use chl

 

[ShidoNyu]

If it works perfectly, I can have it activated when starting atmosphere, but I have a small problem and this already happened to me with the previous Fizeau, and the only problem is when I put the console in sleep mode and when docking it to the dock and then removing it, I The atmosphere error code 0x7D2A5 (2165-1001) appears, it only happens when the console is suspended and I put it in the dock, but the funny thing is that it doesn't happen if the console is on and then I put it in dock mode, I can play Perfectly, I would like to know if there is any solution in a specific case, in both portable and dock mode I have it configured, no tengo ningun servicio corriendo solo Fizeau

Post automatically merged: Dec 27, 2023

The only solution for now that I see is when you are about to put the console in sleep mode, deactivate Fizeasu and when it is about to use the console again, remove it in dock mode and activate Fizeasu again, be careful it only happens in suspension when docking it to the dock, but not on because if I dock it on I can play in the dock without problems

Post automatically merged: Dec 28, 2023

Since it appears that the issue tracking this crash on github was deleted, I reupload the tentatively fixed builds here.
Please report any issue, if none arise, I will do a release in a couple days.

I just tried this one, the Fizeau-chl and it seems that it solved my suspension problem when connecting it to the dock, what I did do was delete the atmosphere - config and switch folder and then put the clean files to my micro SD to avoid overwrite errors, and then copy the files from Fizeau-chl, thanks

 

[averne]

New release: https://github.com/averne/Fizeau/releases/latest
Fixes crashes when docking/undocking, and fixes the color dimming which was broken.

 

[Medel87]

when I unlock switch docked, signal to TV don't work, I need to put it unlocked on dock to have image on TV

This still happen with new update, same as last test version