is there a way to use this for vwii injected games with gamepad support? or is there a similar hombrew for wii out there?
[QUOTE = "dyablo_egurrola, post: 8198280, member: 459621"] I found a solution, install hid to vpad j version [/ QUOTE]
Where can I download it?
Where can I download it?
Last edited by xavier4000wiiu,
Here, on the section of dowload of id to vpad, just navigate, to the old ones versions and u will find it
How can I run HID to VPAD and Mocha CFW at the same time? Or any CFW anyway. When I open Mocha with Haxchi and then HID to VPAD via HBC I end up in a black screen, and if I load HID to VPAD, apply patches and then load Mocha CFW it also ends up in a black screen too.
I remember using both in the past before, maybe there was a certain thing to do or a certain order, but I tried all combinations that I can think of and it just isn't working, the only difference is that my Wii U is now on 5.5.2, but I guess that doesn't make any difference at all. Can anyone help me?
I remember using both in the past before, maybe there was a certain thing to do or a certain order, but I tried all combinations that I can think of and it just isn't working, the only difference is that my Wii U is now on 5.5.2, but I guess that doesn't make any difference at all. Can anyone help me?
I have have the newest one, 9.0k or something similar, should I go back or try a nightly?
is there a way i can use my ps4 controller to play mario sunshine i have it set up as a vc injected game but i cant figure out which controller i should map it to gamepad or pro controller?
Hello, did anyone used Switch Pro Controller on this?
I've tested on my Wii U and it works flawlessly, except the stick apparently doesn't feels quite right, it does not reach most running speed on most game when I push the stick fully (for example, Splatoon).
I'm aware I can set the configuration for deadzone, but I'm looking for the optimal value because I don't know the exact value. If anyone has a similar problem with me but has the configuration, please share it to me.
https://github.com/FIX94/gc-to-vpad/issues/7
by the way, I googled my problem and this is literally me
I've tested on my Wii U and it works flawlessly, except the stick apparently doesn't feels quite right, it does not reach most running speed on most game when I push the stick fully (for example, Splatoon).
I'm aware I can set the configuration for deadzone, but I'm looking for the optimal value because I don't know the exact value. If anyone has a similar problem with me but has the configuration, please share it to me.
https://github.com/FIX94/gc-to-vpad/issues/7
by the way, I googled my problem and this is literally me
Last edited by misterdarvus,
Hello. I actually owned 2 Gravis Controllers for HID to VPad; one of them is the Gravis Eliminator AfterShock. This controller is supposed to have force feedback so, I have an issue. The Eliminator AfterShock is missing a force feedback from the controller. This is the only issue I seen so far. Any thoughts on force feedback should be appreciated!
Here's my current configuration:
Here's my current configuration:
Code:
//Gravis Eliminator AfterShock GamePad
//Rumble support: Force Feedback
//Game pad type: Dual Analog
//Special Features:
// Precision Control
[vid = 0x047D, pid = 0x4006]
//Buttons
VPad_Button_A = 0x6, 0x04
VPad_Button_B = 0x6, 0x02
VPad_Button_X = 0x6, 0x08
VPad_Button_Y = 0x6, 0x01
VPad_Button_Plus = 0x7, 0x01
VPad_Button_Minus = 0x7, 0x02
//Start & Select = Home
VPad_Button_Home = 0x7, 0x03
VPad_Button_L = 0x6, 0x10
VPad_Button_R = 0x6, 0x20
//Triggers
VPad_Button_ZL = 0x6, 0x40
VPad_Button_ZR = 0x6, 0x80
//D-Pad
DPad_Mode = DPad_Absolute_2Values
VPad_Button_DPad_Abs_Up = 0x5, 0x00
VPad_Button_DPad_Abs_Down = 0x5, 0xFF
VPad_Button_DPad_Abs_Left = 0x4, 0x00
VPad_Button_DPad_Abs_Right = 0x4, 0xFF
//Thumbsticks
VPad_L_Stick_X = 0x0, 0x80
VPad_L_Stick_X_MinMax = 0x00, 0xFF
VPad_L_Stick_X_Deadzone = 0x0A
VPad_L_Stick_X_Invert = False
VPad_L_Stick_Y = 0x1, 0x80
VPad_L_Stick_Y_MinMax = 0x00, 0xFF
VPad_L_Stick_Y_Deadzone = 0x0A
VPad_L_Stick_Y_Invert = True
VPad_R_Stick_X = 0x3, 0x80
VPad_R_Stick_X_MinMax = 0x00, 0xFF
VPad_R_Stick_X_Deadzone = 0x0A
VPad_R_Stick_X_Invert = False
VPad_R_Stick_Y = 0x2, 0x80
VPad_R_Stick_Y_MinMax = 0x00,0xFF
VPad_R_Stick_Y_Deadzone = 0x0A
VPad_R_Stick_Y_Invert = True
PAD_COUNT = 1
I wanted to submit my controller .ini for a buffalo famicom pad, but I can't really get my head about how to use github 
https://mega.nz/#!IRNmwIbS!VRJVgI3PRImAGqvCVhuW1018SrA4VDBzXbc8Y7MD2uQ
https://mega.nz/#!IRNmwIbS!VRJVgI3PRImAGqvCVhuW1018SrA4VDBzXbc8Y7MD2uQ
ive tried the same thing, you will have to run cfw first after that boot up hid-vpad then open up mii channel again to boot back into homebrew after you load up hid-vpad the true problem is that this plugin doesn't allow other plugins to run at the same time unless you use this https://gbatemp.net/threads/wii-u-plugin-system.496659/#post-7833438 the only problem is this is just being developed and don't allow other configs yet so you're are only going to get wii u pad emulation for now unless they updated it to get wii u pro emulation from the last time I checked
Is it possible to assign two physical buttons to the same vpad button?
I’m using a Switch Horipad, which has a Screenshot button in addition to the Home button. I tried to assign both of those to send Plus (similar to some 3DS games having both Start and Select pause the game, so you had a pause button on each side):
VPAD_BUTTON_PLUS = 0x01, 0x10
VPAD_BUTTON_PLUS = 0x01, 0x20
but the second one seems to override the first, so Screenshot sends Plus, and Home doesn’t send anything.
Maschell replied on GitHub - you can’t do it directly. You have to remap the *Gamepad* to duplicate the button. So I guess I’ll remap Minus to Plus, and repurpose one of the buttons I never use - TV or Sync - as Minus. Or just stick with what I’ve got at the moment : p.
--------------------- MERGED ---------------------------
Also about the Horipad, the config file on GitHub was missing the stick clicks, but has been updated 22/9/18 to include them.
I’m using a Switch Horipad, which has a Screenshot button in addition to the Home button. I tried to assign both of those to send Plus (similar to some 3DS games having both Start and Select pause the game, so you had a pause button on each side):
VPAD_BUTTON_PLUS = 0x01, 0x10
VPAD_BUTTON_PLUS = 0x01, 0x20
but the second one seems to override the first, so Screenshot sends Plus, and Home doesn’t send anything.
Maschell replied on GitHub - you can’t do it directly. You have to remap the *Gamepad* to duplicate the button. So I guess I’ll remap Minus to Plus, and repurpose one of the buttons I never use - TV or Sync - as Minus. Or just stick with what I’ve got at the moment : p.
--------------------- MERGED ---------------------------
Also about the Horipad, the config file on GitHub was missing the stick clicks, but has been updated 22/9/18 to include them.
Last edited by emcintosh,
I've had that happen occasionally. Have you tried opening HID to VPAD *before* plugging in the controller? That fixes the black screen for me.
- No one is chatting at the moment.
