Hacking Hardware Picofly - a HWFLY switch modchip

[everyonesweird]

You need to wait for v2.6

it needs some testing, approximately several days

When can we expect the v2.6 brother?

Sent from my SM-G781B using Tapatalk

 

[morcha3]

and is there anyone among you trying to install pi pico? if so can you guide me by what i have no rp2040 zero in my area i found that pi pico

 

[rehius]

and is there anyone among you trying to install pi pico? if so can you guide me by what i have no rp2040 zero in my area i found that pi pico

same, you need to wait for v2.6

you will also have to precisely cut it to fit into the switch

 

[deeps]

When can we expect the v2.6 brother?

Sent from my SM-G781B using Tapatalk

Please read this post https://gbatemp.net/threads/picofly-a-hwfly-switch-modchip.622701/post-10109577

 

[morcha3]

thank you very much for your hard work rehius and team gbatemp

 

[Ganesha0112]

Hello friends, anyone have a list of the bugs and errors that the picofly old and latest versions may cause?

 

[rehius]

Hello friends, anyone have a list of the bugs and errors that the picofly old and latest versions may cause?

- unlock through the toolbox breaks BOOT0, you have to either run firmware update or restore clean BOOT0 to fix it
- voltage regulator is turned off instead of sleep mode in the preloader, affects glitch reliability, you can update the sdloader (to the hwfly-nx 0.7.2 one) with hwfly toolbox to fix that

 

[peteruk]

Please don't throw any rotten fruit or veg at me but that Hwfly for the oled just took (yet another) price drop

Now down to 32.38 UK - starting to get tempted, I think my buying point would be £25, so if there watching this just letting you know

 

[linuxares]

Please don't throw any rotten fruit or veg at me but that Hwfly for the oled just took (yet another) price drop

Now down to 32.38 UK - starting to get tempted, I think my buying point would be £25, so if there watching this just letting you know

View attachment 363013

if this drop continues it's soon there

 

[eseldiem]

if this drop continues it's soon there

I mean, that same listing has 100 pieces at $15/pc. That’s not bad at all.

 

[Dee87]

Personally, I'd rather just replace the chip w\ a bigger one that is already preballed. 256gb from AliE, for around $80 after taxes\shipping. Check the 'emmc upgrade' thread from @binkinator for instructions and my link towards the bottom for purchasing. Especially with an OLED that has a Toshiba.

Just Opend my oled and "lucky" me i have s skhnix emmc , i will definetly be looking for e new emmc soon they seem to have issues so maybe it will be a 256 some day.......
but for now im gonna get that thing running so i can make a backup Xd

 

[peteruk]

if this drop continues it's soon there

I think £25 is a fair price for what you get including all the connectors etc.. I'm thinking it would be an easier job for the technician to fit to my oled for me with this kit

 

[FlowerFire]

I've seen pictures of some installs using seemingly thick wires. Would it be possible to (comfortably) use 0.6mm enameled wires instead of the suggested 0.2mm? Or would they just get stuck somewhere?

 

[Dee87]

Please don't throw any rotten fruit or veg at me but that Hwfly for the oled just took (yet another) price drop

Now down to 32.38 UK - starting to get tempted, I think my buying point would be £25, so if there watching this just letting you know

View attachment 363013

for me its around 40€ but even if its 25€ i wouldnt bother buying , i like diy way to much

 

[eseldiem]

I've seen pictures of some installs using seemingly thick wires. Would it be possible to (comfortably) use 0.6mm enameled wires instead of the suggested 0.2mm? Or would they just get stuck somewhere?

I guess you could use thicker wires, if you were extra careful not to short anything with them.

But the thin wires are just so much easier to handle and place…

When you see it under the microscope you’ll understand.

 

[Dee87]

I guess you could use thicker wires, if you were extra careful not to short anything with them.

But the thin wires are just so much easier to handle and place…

When you see it under the microscope you’ll understand.

very true
i use 0.1mm emaled magnet wire thats plenty enough for what we are doing

 

[FlowerFire]

I guess you could use thicker wires, if you were extra careful not to short anything with them.

But the thin wires are just so much easier to handle and place…

When you see it under the microscope you’ll understand.

So it's "just" that thinner wires are easier to use? Would thicker wire just fit without needing to be rerouted?

 

[deeps]

I mean, that same listing has 100 pieces at $15/pc. That’s not bad at all.

That kinda tells us how huge margins they have on these. $15 would be a no brainer.

 

[dkabot]

After some successful boots, subsequent failure (as a consequence of the horrible hack to the chip), switching to a -ZERO like we should've started with, a further amount of successful boots, and now further subsequent failure... Any ideas?
It blinks orange (D0) currently, and boots without the chip.

Still looking for advice on this, if anyone has any.
No idea what would cause it to work,  then fail (at least the second time; I know why the first did).

 

[Anubiscrypto]

hi!
I have some problem.
I install the cip,boot in hecate and I ca't lunch Atmosphere,
If I lunch lockpick and try to Dunmp from sys nand I gat the error " Unable to cripto keyslots!
try lunch payload diferently or flash spacecraft nxis using a mod cip.
is the second console and second cip un got same error.
I use Hats pack From stetix.
Can some one give me an ideea?