Hacking Hardware Picofly - a HWFLY switch modchip

QuiTim · May 29, 2023

Cristiano04 said:
Hello, gentlemen, do these two resistors have the same values?

4.7Kohm 0201 both of them

jmmc · May 29, 2023

Danook28 said:
The flex v2. V3. Lite Flex. Is same value to sp1 sp2. On nintendo switch lite.???

Yes, you can use V2/3 on v2 switch, lite and oled.

Danook28 · May 29, 2023

jmmc said:
Yes, you can use V2/3 on v2 switch, lite and oled.

Thank you brother

jmmc · May 29, 2023

Kiuxn said:
I used 6 2040-tiny today. Three of the switches (V1/V2) of Samsung emmc have emmc slow error.

With just the integrated 47ohm resistors or have you added one more to dat0 and cmd?

Cristiano04 · May 29, 2023

QuiTim said:
4.7Kohm 0201 ambos

obrigado mano

Kiuxn · May 29, 2023

jmmc said:
With just the integrated 47ohm resistors or have you added one more to dat0 and cmd?

The revised tiny integrates 45 ohm resistors.

Adran_Marit · May 29, 2023

HackMan37 said:
I use and adaptor that came with the micro SD.

The brand it's Kingston Canvas Select Plus.

I'm 99% sure that's not Micro SD fault, because I can get into UMS mode and see the SD card on the PC with USB C on the switch.

I can play with the GPP partitions and the Boot0 and Boot1 too.

I try with exFat and FAT32 too.

Hmm try a different sd card and windows or Mac?

cgtchy0412 · May 29, 2023

No issue with that Kingston Canvas select plus, been using it few times.

jmmc · May 29, 2023

Kiuxn said:
The revised tiny integrates 45 ohm resistors.

I thought they were 47 thx. But did you add a “second” resistor to fix slow emmc error?

mian_85_ · May 29, 2023

Hi guys,

Installing the picofly I burned the CMD resistor in my OLED switch.
I read in other post that the resistor that is sitting on the CMD point is 4k7 ohm and the one beside that is 47k ohm, both 0201 size.
Can you confirm the value and the size?

I want to confirm before order them.

Thanks and regards

Arakon · May 29, 2023

jmmc said:
I thought they were 47 thx. But did you add a “second” resistor to fix slow emmc error?

These resistors usually have a 10% margin of error plus some resistance over the wire itself that changes with length, so 45 and 47 are close enough to make no difference.

Danook28 · May 29, 2023

Im finish install pico fly on my console lite. The pico boot slow. Is there any fix. Im use 3.73 firmware.

Switxh · May 29, 2023

Danook28 said:
Im finish install pico fly on my console lite. The pico boot slow. Is there any fix. Im use 3.73 firmware.

I have an OLED that has slow glitch times on the Pico too. Are you using mosfets or a HWFLY CPU flex?

Takezo-San · May 29, 2023

Danook28 said:
Im finish install pico fly on my console lite. The pico boot slow. Is there any fix. Im use 3.73 firmware.

Picture of install please

Danook28 · May 29, 2023

Switxh said:
I have an OLED that has slow glitch times on the Pico too. Are you using mosfets or a HWFLY CPU flex?

Flex v3

cowboy619 · May 29, 2023

Danook28 said:
Im finish install pico fly on my console lite. The pico boot slow. Is there any fix. Im use 3.73 firmware.

Check resistors and solder points

Sent from my iPhone using Tapatalk

Switxh · May 29, 2023

cowboy619 said:
Check resistors and solder points

Sent from my iPhone using Tapatalk

I have slow glitching Pico too. The resistors are not shorted and the diode readings for those points are in range but the CPU point 15 on the Pico measures 1.119 v which I think is too high as I've heard it should be around 0.500. Do you have any idea what could cause the high reading on CPU point on the Picofly?

Danook28 · May 29, 2023

Takezo-San said:
Picture of install please

Im sorry it is first install. And any thing wrong plz told me what I do wrong. Thanks. Im still not soldring Flex legs i was thinking on my console it is new.

cowboy619 · May 29, 2023

Danook28 said:
Im sorry it is frist install. And any thing wrong plz told me what I do wrong. Thanks. Im still not soldring Flex legs i was thinking on my console it is new.

Those resistors are holding on for dear life. Check diode readings on all points and report back with values

Sent from my iPhone using Tapatalk

DejavuStudio · May 29, 2023

My work for oled with 2.73
Instant boot in 1s, so surprise.
Thanks allll

Hacking Hardware Picofly - a HWFLY switch modchip

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Walküre's Hacker

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Member

Attachments

Similar threads

Popular threads in this forum