I have done it Thank you so much. I am not getting the same error however still some games (installed after updating) cannot open. Error Code: 2002-4000 Do you think that this might be a bad nsp?
Thanks again
Hi to all. I have a Switch Lite with hwfly lite v4.2 with a Emunand CFW v16.0.3 in micro sd, using hekate v6.0.5 & Nyx v1.5.4 and Atmosphere 1.5.4. When I updated the CFW offline using daybreak and clicked on OK for reboot, the system restarted to OFW. When the console is OFF the system boots into hekate. The question: If console ON in CFW Emunand Atmosphere, how to make system reboot in hekate after reboot required by daybreak (or any reboot)?
Edit: This topic is the same case and no solution!
https://gbatemp.net/threads/oled-hwfly-fail-to-reboot-to-cfw.609342/
Edit: This topic is the same case and no solution!
https://gbatemp.net/threads/oled-hwfly-fail-to-reboot-to-cfw.609342/
Last edited by mathsw,
I currently have a picofly modded switch lite with no accounts attached.
I own a few eshop titles I would like to back up.
My question is do I just log into my account on CFW sysnand download to device go back to CFW emummc do what I need to and then go back and remove account.
Or is this to risky as I have a lot of titles on account and don't want account locked out.
Thanks in advance
I own a few eshop titles I would like to back up.
My question is do I just log into my account on CFW sysnand download to device go back to CFW emummc do what I need to and then go back and remove account.
Or is this to risky as I have a lot of titles on account and don't want account locked out.
Thanks in advance
If the cpu on the switch dies, is there any way to restore saved data even if there is an emmc backup?
I also understand that there is a unique hardware key.
Have you found a way to break through it and port it to another switch?
I also understand that there is a unique hardware key.
Have you found a way to break through it and port it to another switch?
Looking for a guide on how to setup cheats for games on switch.
Also looking for a guide to setup retroarch on switch. Thanks!
Also looking for a guide to setup retroarch on switch. Thanks!
What is the best way to copy system file 80000000000000010 and 80000000000000f0 from 1 switch to another. This files contain user profile and playtime stats.
Direct copy doesn’t work, tried tegraexplorer. Atmosphere crashes at startup.
if direct 1 to 1 doesnt work, I used nxnandmanager to extract/ decrypt the files to actual folders, but don’t know how to sign with new switch keys and copy it back in the emummc dump…
would appreciate the help…seems something a lot of people would like to have. If your switch gets stolen or broken.… can imagine people want to copy user profile with playtime stats …
fyi… for only user profiles …. I made a manual backup with Linkhalo and restored it on the new switch. It works, (this is actually the contents of encrypted file 800000000000010 that contain All user profiles ) but it wipes all games saves and playtime stats. So you need to use jksv to restore your game saves.
Direct copy doesn’t work, tried tegraexplorer. Atmosphere crashes at startup.
if direct 1 to 1 doesnt work, I used nxnandmanager to extract/ decrypt the files to actual folders, but don’t know how to sign with new switch keys and copy it back in the emummc dump…
would appreciate the help…seems something a lot of people would like to have. If your switch gets stolen or broken.… can imagine people want to copy user profile with playtime stats …
fyi… for only user profiles …. I made a manual backup with Linkhalo and restored it on the new switch. It works, (this is actually the contents of encrypted file 800000000000010 that contain All user profiles ) but it wipes all games saves and playtime stats. So you need to use jksv to restore your game saves.
So I was able to resolve my Lets Go Pikachu issue but now I am trying to run a hacked version of Scarlet & Violet & it is working fine but what I am really interested in is extracting the trdata/trpoke files so I can edit trainers teams. I wanted to give Nemona/gym leaders/Star Bosses full teams when you first fight them but I can’t find a guide on reddit or anywhere. Is there a guide on this??
Last edited by KibaLG8,
Hey dudes. Well I got this strange problem. Thing is, two games have been having issues starting on my console. The games in question are RE Revelations 1 & 2. When it happened with Revelations 2, I did everything in my power to try to make it run. But to no avail. It launches, a couple of seconds on the black "Nintendo Switch" logo and closes. Tried with three different nsp's, same result. I dumped a NSP without tickets, installed and the same issue. Don't know what to do. And even worse, Revelations 1 is a cartridge, I have it right here. Original catridge, and exactly the same problem. It closes one or two seconds after launch. Tried the cartridge with my son's switch and it runs flawless. What could be the problem? I have no idea what the hell is going on. A couple of time something like this happened but it was fixed with a ticketless new dump of the NSP and reinstalling, but this time around, I can´t find the solution. Could anybody please help me? I don't want to open a new thread but to be honest this is some strange shit.
Thank you in advance!!!
Thank you in advance!!!
Ok. I've been avoiding Switch entirely because I don't like Nintendo's gimmick hardware, but I'm planning to get one now that Mario RPG is getting remastered. Couldn't resist. I'll probably pick up a few other titles as well. at this point, I don't care for physical games. My PS and Xbox libraries are all digital.
So here's the thing. The only thing I can find about save hacks involves hacked firmware, which I have no interest in doing. We've been modding PS4 saves for like 10 years without needing our consoles hacked, and that can't even be emulated. If Switch emulation is a thing, and all this stuff is being dumped, and Switch stores everything on an SD card...there's no reason a proper tool to unpack/decrypt saves for editing on PC and transferring back to work on official firmware shouldn't exist. So does it? Is anyone working on it? What's the problem? I hate that this new generation of hackers either takes the lazy way out or monetizes everything (SaveWizard). Take it as a challenge, if you want. Nobody ever did Vita saves properly either, in spite of PS4 being done exactly as it should (aside from paywall), and it pisses me off.
So here's the thing. The only thing I can find about save hacks involves hacked firmware, which I have no interest in doing. We've been modding PS4 saves for like 10 years without needing our consoles hacked, and that can't even be emulated. If Switch emulation is a thing, and all this stuff is being dumped, and Switch stores everything on an SD card...there's no reason a proper tool to unpack/decrypt saves for editing on PC and transferring back to work on official firmware shouldn't exist. So does it? Is anyone working on it? What's the problem? I hate that this new generation of hackers either takes the lazy way out or monetizes everything (SaveWizard). Take it as a challenge, if you want. Nobody ever did Vita saves properly either, in spite of PS4 being done exactly as it should (aside from paywall), and it pisses me off.
Hi,
whenever I try to boot into Atmosphere, I keep getting the 2002-4687 error.
From my research, there doesn't seem to be much I can do except trying to format the SD card
or set up the entire EmuNand again from scratch.
What's the procedure after formatting the EmuNand partition with Fat32?
I want to restore my created EmuMMC backup using Nandmanager.
Do I need to create a new EmuNand with Hekate first (after the format) and then perform a full restore with Nandmanager?
Is that enough, or is there anything else that needs to be done?
whenever I try to boot into Atmosphere, I keep getting the 2002-4687 error.
From my research, there doesn't seem to be much I can do except trying to format the SD card
or set up the entire EmuNand again from scratch.
What's the procedure after formatting the EmuNand partition with Fat32?
I want to restore my created EmuMMC backup using Nandmanager.
Do I need to create a new EmuNand with Hekate first (after the format) and then perform a full restore with Nandmanager?
Is that enough, or is there anything else that needs to be done?
Hi guys, i need help. i have a fatal error (invalid gpt signature) after I migrate all the files from my old sd card from a new one. I made the new smsng 256 gb to fat32, then i cntrlC +cntrlV all atmosphere and the g a m e s + emuMMC to the smsng sd. what i need to do now?
Hey everyone. I apologize if I’m doing a poor job explaining my issue. New to the whole arena and trying to understand more but I’m currently stuck with an issue on my modchipped OLED Switch.
I had someone install the chip for me. 100+ positive reviews. Plenty of great feedback from previous customers so I felt good about it.
After getting my switch back it worked great. Zero issues. After about two weeks I rebooted the system to load a new theme and my Switch booted up into the original firmware. I had rebooted it previously with no issues. I could get back to atmosphere and load the CFW without issue. But now it will only boot to the stock firmware. A few days went by and I was about to box up my Switch to send it back to the installer and I saw the Atmosphere logo and i was promoted to select which firmware to use. Seemed like things were working again.
Last night I had to reboot and I’m back at the original firmware. Can’t get back to atmosphere or my CFW.
Anyone know what is causing this or how to fix it? Seems like every reboot reverts it back to the OFW but I have no idea what fixed this for me last time.
I had someone install the chip for me. 100+ positive reviews. Plenty of great feedback from previous customers so I felt good about it.
After getting my switch back it worked great. Zero issues. After about two weeks I rebooted the system to load a new theme and my Switch booted up into the original firmware. I had rebooted it previously with no issues. I could get back to atmosphere and load the CFW without issue. But now it will only boot to the stock firmware. A few days went by and I was about to box up my Switch to send it back to the installer and I saw the Atmosphere logo and i was promoted to select which firmware to use. Seemed like things were working again.
Last night I had to reboot and I’m back at the original firmware. Can’t get back to atmosphere or my CFW.
Anyone know what is causing this or how to fix it? Seems like every reboot reverts it back to the OFW but I have no idea what fixed this for me last time.
Hi everyone. Hoping someone knows / have experienced my problem and know the solution to it:
I recently updated my swtich to the latest firmware by mistake. so I downloaded the latest atmosphere-1.5.4, new sig patches and the fusee file and slapped them onto the root of my SD card.
When I load up TegraRcmGUI, I'm able to connect my switch to it (RCM connected screen appears), but the moment I inject the new fusee file, the atmopshere logo appears on my switch but then immediately disconnects from the TegraRCMGUI.
The switch is then booted up in its normal mode.
Does anyone know how to fix this? much appreciated
I recently updated my swtich to the latest firmware by mistake. so I downloaded the latest atmosphere-1.5.4, new sig patches and the fusee file and slapped them onto the root of my SD card.
When I load up TegraRcmGUI, I'm able to connect my switch to it (RCM connected screen appears), but the moment I inject the new fusee file, the atmopshere logo appears on my switch but then immediately disconnects from the TegraRCMGUI.
The switch is then booted up in its normal mode.
Does anyone know how to fix this? much appreciated
Heyy i have a problem when i try to launch Atmosphere (emuMMC)
I just install the HWFLY on my switch (Mariko v2). My SD look like that :
but when i want to launch atmosphere (emuMMC) i have this message coming of :
Pkg1 decryption failed/
BEK is missing/
Failed to launch HOS/
what i'm doing wrong ?
TY
I just install the HWFLY on my switch (Mariko v2). My SD look like that :
but when i want to launch atmosphere (emuMMC) i have this message coming of :
Pkg1 decryption failed/
BEK is missing/
Failed to launch HOS/
what i'm doing wrong ?
TY
Bought a used V1 Switch on FB. Seller says that it wasn't turning on anymore despite no water or other damage. Not charging, no power, no RCM as per TegraRCM (PC). Any suggestions on how I can diagnose? Soldering/disassembling ok if needed. Thanks!
- No one is chatting at the moment.
