Hacking SWITCH NOOB PARADISE - Ask questions here

[Draxzelex]

Hi, my jailbroken Switch got accidentally connected to WiFi and updated to 16.0.3 and games aren't launching anymore.

What would the process to jailbreak it again look like? Please let me know if there's any other context you need to be able to help out and thanks in advance!

Firstly, you do not "jailbreak" the Nintendo Switch. Jailbreaking is a term used only for the Playstation and iOS devices. A more accurate term would be "hacking" the Switch. Secondly, the process is the same as when you hacked it the first time. Just retrace your steps and you will be back in CFW.

 

[WizardOfEvergreen]

Newbie to the fourms and switch modding in general here: What is the state of trying to mod XAJ7 and XKW1 (and up) switches? I know they're patched with available vulnerabilities in the sleep mode and recovery mode, but is that really it? Could something like even a shit game allow for a vulnerability too? Sorry for the question dump.

 

[a_username_that_is_cool]

Newbie to the fourms and switch modding in general here: What is the state of trying to mod XAJ7 and XKW1 (and up) switches? I know they're patched with available vulnerabilities in the sleep mode and recovery mode, but is that really it? Could something like even a shit game allow for a vulnerability too? Sorry for the question dump.

Only 1 shit game allows for that, Puyo Puyo Tetris (JP 1.0 ONLY). That's an entrypoint for PegaScape.

 

[Bajdo]

I need to update the fw on my hacked switch, atmosphere. Is there any step by step guide anywhere to be found?

 

[Nynrah]

Does anyone know if it's possible to use cheats that are used on the Switch via Edizon SE/Breeze when playing a Switch game on an emulator like Yuzu?

 

[Dielop]

Hello, Any1 can tell me how to add more games to my switch with the chip Instinct Nx OLED.

Thanks

 

[a_username_that_is_cool]

Hello, Any1 can tell me how to add more games to my switch with the chip Instinct Nx OLED.

Thanks

Tinfoil, Goldleaf, DBI (Most people prefer it), etc...

 

[WizardOfEvergreen]

Only 1 shit game allows for that, Puyo Puyo Tetris (JP 1.0 ONLY). That's an entrypoint for PegaScape.

I'll look into that more, thank you! I found a seller on Etsy that'll help install a rp2040 modchip though, so I think ill go with them.

Oh yeah, is using etsy sellers like them recommended? They've got good reviews down the board considering the obvious risk, but if theres a more trusted alternative install service then I'd gladly splurge for that.

 

[Freyjadour]

Sorry if this has been asked before,
I just modded my oled switch, and noticed the switch gets hot when I plug it in charger, the temperature for PCB is usually goes up around 50-60, while SOC Temperature always stays within 38-44 degree celcius, the fan is spinning at 20% when SOC temp is at 43~. This happened when I charge my switch from 15% to 80% battery. Is this normal? Because my unpatched switch doesnt go above 50 when I charge it, usually the soc and pcb temp are close, SOC/PCB 49/48 but the fan definitely spins faster than my oled.

EDIT: the temperature above is when I use it while charging. If I don't use it, the switch only gets warm when I touch it, and normal temperature for my oled switch without charger are Soc/PCB/Skin 35/35/36 to 41/40/41

 

[Deleted member 642802]

@Freyjadour: It could have different causes. As a precaution, I would renew the thermal paste, clean the interior of dust and check if the battery is still in good condition.

 

[Freyjadour]

@Freyjadour: It could have different causes. As a precaution, I would renew the thermal paste, clean the interior of dust and check if the battery is still in good condition.

Sorry for not mentioning it sooner, I did repaste my switch, and my switch is only 4 months old, so the battery should be good, checked with hekate before as well. Temp idle is 30 degree, ~43 when playing. When connected to charger and using it, it sits around 45~ and gets rather hot. Aside from that, the switch is working normally, and the battery definitely last longer than my v1.

 

[baobao43]

https://rentry.org/EmuNANDNewSDcardDumb question but just to make sure I must ask. I am curently using the latest hektate and atmosphere but want more space so I am switching to a bigger sd. I am using a partition based Emunand. Is this guide on rentry the one I should follow? And is using Hektate better than Nxnand manager? Also should I backup my sysnand and keys again?

 

[eniorodriig_]

Wondered if someone could help, just bought a Unpatched Switch and on the pictures it seemed that modded apps were already installed e.g Tinfoil - the Switch is being sent with the SD Card removed (doesn't come with it), so I was just wondering what my first steps would be once I get the Switch - thanks.

 

[WizardOfEvergreen]

Back again! Im curious, does factory resetting my switch also reset it to its earliest firmware update? Or does it just stay at the update its at?

 

[linuxares]

Back again! Im curious, does factory resetting my switch also reset it to its earliest firmware update? Or does it just stay at the update its at?

It just stays at the current firmware. Factory resetting is just removing userdata and such.

 

[WizardOfEvergreen]

It just stays at the current firmware. Factory resetting is just removing userdata and such.

Damn, alright. I'll probably just bug some mercari seller for their XAW100 tablet then. The etsy sellers look pretty sketchy, although the reviews are good. Thanks!

 

[RicoZ]

Where to start with homebrew development? Any points to 'starter' guides?

 

[memo95]

Hello guys

I am on the version 9.1.0 and AMS 0.10.2|S I cannot install newer NSP. Do we have any guide to update it? I am having issue with installement Error: 0x236e02 (NSP) (4535). Can you please help me with that?

Thanks

 

[Hayato213]

Hello guys

I am on the version 9.1.0 and AMS 0.10.2|S I cannot install newer NSP. Do we have any guide to update it? I am having issue with installement Error: 0x236e02 (NSP) (4535). Can you please help me with that?

Thanks

https://rentry.org/UpdateCFWAndFW

 

[memo95]

https://rentry.org/UpdateCFWAndFW

I have done it Thank you so much. I am not getting the same error however still some games (installed after updating) cannot open. Error Code: 2002-4000 Do you think that this might be a bad nsp?

Thanks again