I too saw this article on hackaday this morning, but my immediate thought was the same as the complaints in the hackaday comments: he got it this small by doing like the rp2040-zero; he placed components on both the front and back, ultimately making the board thicker than offerings like the rp2040-tiny.
Pretty cool project regardless, especially if only considering the "how small can we actually make this?" notion.
Hi, i have question. My v2 console has a toshiba emmc and it takes up to 40 sec to boot with a pico zero. Are there still issues with toshiba or how could i improve the timing to glitch? v2 flex and awg34 cables were used
Hi, i have question. My v2 console has a toshiba emmc and it takes up 40 sec to boot with a pico zero. Are there still issues with toshiba or how could i improve the timing to glitch? v2 flex and awg34 cables were used
i've added them, and they seem to improved it. Still sometimes it boots instantly, somestimes takes still longer. Maybe have to be observed and boot many times. thx still sometimes even 2min, wtf :x
Did my average 4p2040 zero install, thought everything went well, until i turned it on and got a cmd not connected error, so i just redid my cmd, anyways i got it to boot to hakete and tried to go into sysnand (got that message) then i tried to just boot into OFW and got a purple screen, did i corrupt my nand while trying to do the Dat0? (the multimeter reading seemed fine) also i tried to look around here to see what it could be and i heard it could also have to do something with the CMD resistor, anyways any help would be appreciated thanks!
well im not getting any readings on that resistor, nor on the resistor next to it, could they both be damaged? i only messed with the one I needed to mess with for the install so I don't know how the other one could've gotten damaged, anyways, where could I get a replacement 4.7k resistor anyway? would I have to go buy them online? or is there somewhere I could grab them off
actually i just realized, i have a library of resistors that I bought for the 47 resistors for the rp2070 zero and I have like 20 0805 4.7k resistors. its a bit big but I think I can make it work. just worried about the one beside the cmd one not giving me a reading.
well im not getting any readings on that resistor, nor on the resistor next to it, could they both be damaged? i only messed with the one I needed to mess with for the install so I don't know how the other one could've gotten damaged, anyways, where could I get a replacement 4.7k resistor anyway? would I have to go buy them online? or is there somewhere I could grab them off
Post automatically merged:
actually i just realized, i have a library of resistors that I bought for the 47 resistors for the rp2070 zero and I have like 20 0805 4.7k resistors. its a bit big but I think I can make it work. just worried about the one beside the cmd one not giving me a reading.
i go to the ohms section on my multimeter, select 2k and put each prone on each side, lmk if Im royally fucking it up lol ( I get nothing when I do that.
i go to the ohms section on my multimeter, select 2k and put each prone on each side, lmk if Im royally fucking it up lol ( I get nothing when I do that.
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
While rumors had been floating about rampantly as to the future plans of Nintendo, the President of the company, Shuntaro Furukawa, made a brief statement confirming...
As each year passes, retro games become harder and harder to play, as the physical media begins to fall apart and becomes more difficult and expensive to obtain. The...
TheFlow has done it again--a new kernel exploit has been released for PlayStation 4 consoles. This latest exploit is called PPPwn, and works on PlayStation 4 systems...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
Nintendo might just as well be a law firm more than a videogame company at this point in time, since they have yet again issued their now almost trademarked usual...
Nintendo has officially announced that a successor to the beloved Switch console is on the horizon. As we eagerly anticipate what innovations this new device will...
Another video game prototype has been found and preserved, and this time, it's none other than the game that spawned an entire franchise beloved by many, the very...
Anbernic is back with yet another retro handheld device. The upcoming RG28XX is another console sporting the quad-core H700 chip of the company's recent RG35XX 2024...
DOOM is well-known for being ported to basically every device with some kind of input, and that list now includes the old retro game console in Persona 5 Royal...
Nintendo has officially announced that a successor to the beloved Switch console is on the horizon. As we eagerly anticipate what innovations this new device will...
While rumors had been floating about rampantly as to the future plans of Nintendo, the President of the company, Shuntaro Furukawa, made a brief statement confirming...
Nintendo might just as well be a law firm more than a videogame company at this point in time, since they have yet again issued their now almost trademarked usual...
As each year passes, retro games become harder and harder to play, as the physical media begins to fall apart and becomes more difficult and expensive to obtain. The...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
TheFlow has done it again--a new kernel exploit has been released for PlayStation 4 consoles. This latest exploit is called PPPwn, and works on PlayStation 4 systems...
After rumour got out about an upcoming NES Edition release for the famed Nintendo World Championships, Nintendo has officially unveiled the new game, titled "Nintendo...
DOOM is well-known for being ported to basically every device with some kind of input, and that list now includes the old retro game console in Persona 5 Royal...
Ubisoft has today officially revealed the next installment in the Assassin's Creed franchise: Assassin's Creed Shadows. This entry is set in late Sengoku-era Japan...
@Xdqwerty good. thats great fma takes more time to to build up the beginning. brotherhood rushed the beginnign because the beginning had already been told