Update: Turns out the issue is with RxTools as I used CakesFW instead and it detected and booted into my EmuNAND fine. I've started a new thread to find out why RxTools is not working here: https://gbatemp.net/threads/rxtools...nd-cakes-detects-it-o3ds.409301/#post-5950777
Thanks for all the help guys!
I have spent 10+ hours trying to install rxTools on my O3DS (10.3 downgraded to 9.2.0-20U, downgrade confirmed with downgrade-checker). EVERY SINGLE TIME it says "EmuNAND Not Found" for the EmuNAND I created using EmuNAND9.
I am following this guide: https://gbatemp.net/threads/tutorial-more-or-less-catch-all-tutorial.407080/
I have tried many variations.
- Instead of my 64GB MicroSD, used a 16GB MicroSD, used 4GB SD that came with O3DS
- Different versions of rxTools. Instead of firmware.bin, use cdn_firm to generate firm folder and put that in /rxTools/
- Tried creating emuNand using Gateway instead.
- Tried using a different PC
- Tried setting it up beginning from after restoring NAND.bin
=====================================================
Included is a step-by-step of what I am attempting that I wrote literally as I was doing it. Let me know if you see anything that I am doing wrong.
Please help. I am about to throw my 3DS into a volcano.
Thanks for all the help guys!
I have spent 10+ hours trying to install rxTools on my O3DS (10.3 downgraded to 9.2.0-20U, downgrade confirmed with downgrade-checker). EVERY SINGLE TIME it says "EmuNAND Not Found" for the EmuNAND I created using EmuNAND9.
I am following this guide: https://gbatemp.net/threads/tutorial-more-or-less-catch-all-tutorial.407080/
I have tried many variations.
- Instead of my 64GB MicroSD, used a 16GB MicroSD, used 4GB SD that came with O3DS
- Different versions of rxTools. Instead of firmware.bin, use cdn_firm to generate firm folder and put that in /rxTools/
- Tried creating emuNand using Gateway instead.
- Tried using a different PC
- Tried setting it up beginning from after restoring NAND.bin
=====================================================
Included is a step-by-step of what I am attempting that I wrote literally as I was doing it. Let me know if you see anything that I am doing wrong.
- Starting fresh: Format 3DS System Memory + MicroSD with guiformat (FAT32 + 32kb Allocation Size)
- Setup 3DS, connect to wifi
- Put newly formatted SD back, 3DS says setting up Home Management software
- Go to "Change Theme" to initialize Theme files
- Turn Off 3DS, Eject SD
- Copy all Homebrew Launcher (https://smealum.github.io/ninjhax2/starter.zip) files into root of SD
- Copy boot.cfg into root of SD.
Code:// Boot menu configuration boot_config = { // Default timeout in secondes // If timeout = -1, disable autoboot timeout = 3; // Some devices (n3ds?) seems to have // some timing problems when using timeout=0 (autoboot). // You may increase this value to improve boot success rate. // Default delay (8) should be good for o3ds, 2 seems good for n3ds autobootfix = 8; // if timeout = 0 (autoboot), // hold this key to enter the menu // keycode list : https://goo.gl/4XLDIL recovery = 2; // SELECT // Default boot entry default = 0; // Boot menu entries (11 max) entries = ( { title = "rxTools"; path = "/rxTools/sys/code.bin"; offset = "0x12000"; }, { title = "HomeBrewMenu"; path = "/HBL8.3dsx"; } ); };
- Copy rxTools (12/05 Build) into root of SD.
- Put firmware.bin into rxTools/sys. firmware.bin generated with this batch file
Code:@ECHO OFF bitsadmin /transfer FIRM /priority high http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000049 "%~dp0\firm.bin" pause bitsadmin /transfer TWL /priority high http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000202/0000000B "%~dp0\twl.bin" pause bitsadmin /transfer AGB /priority high http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000102/00000016 "%~dp0\agb.bin" pause copy "%~dp0\firm.bin" /b + "%~dp0\twl.bin" /b + "%~dp0\agb.bin" /b "%~dp0\firmware.bin" del "%~dp0\firm.bin" del "%~dp0\twl.bin" del "%~dp0\agb.bin" pause
- Also have tried using firm folder generated by cdn_firm instead of this firmware.bin. Put firm folder into /rxtools
- Drag /3ds/EmuNAND9 from EmuNAND9 Release 3 (https://github.com/d0k3/EmuNAND9/releases) to my SD.
- Start HBL via Browser
- Start EmuNAND9
- Unmount SD using EmuNAND9, backup ALL files in my SD.
- Put SD Back in 3DS. Use "Complete EmuNAND Setup" to create EmuNAND (ignore no starter.bin)
- Shutdown 3DS
- Drag ALL my files back into SD. (The SD's total size is successfully ~2GB smaller from, partition software says 1.2GB unallocated)
- Rename HBL's boot.3dsx to HBL8.3dsx
- Paste CtrBootManager's boot.3dsx and boot.cfg to SD root
- Use BrowserHax to boot to CtrBootManager. I launch rxTools from there.
- rxTools takes ~15s to setup.
Please help. I am about to throw my 3DS into a volcano.
Last edited by RitzMalh,