- Joined
- Sep 8, 2009
- Messages
- 8,079
- Trophies
- 2
- Location
- One's inner self
- Website
- 3dsdb.com
- XP
- 2,466
- Country
well theres nothing you can do if you updated the system NAND
you will just have to hardwire the NAND and re-flash it with the NAND backup you made
Actually, I think he means just "did you leave system settings"?
My best bet is that you did not update through system settings, rather, through the eshop or something... which gateway warned you not to do. If that's not the case, I have no explanation.
Good idea. I've done the same on mine now, except just one blue folder called emu, as I use a different view.
Emunand seems to work fine for me every time, as long as I hold L and boot from GUI. Just doing the normal profile way, results in crash 50% of the time. I wonder if it's something to do with read speed of the sd and loading the gui gives it just the little extra time it needs.
Zelda is working fine for me as well. No home button freeze and save is intact
.
ok guys i just fixed the zelda save file problem
-memory 8gb sandisk ultra microsd ongateway
-memory 32gb sandisk ultra sd on 3ds xl
format both with panasonic sd formatter... full format
then write zelda on microsd with the tool we all use
by the way this is working on 4.4 firmware since im not planning on upgrading.
go to ds profile without pressing L2,
play the game
save
if you need to get out of game PRESS THE DAMN POWER BUTTON. NOT HOME
play the game again. save is there and saved again and it works
no fucking emunand. im on 4.4 and i dont like messing with the nand
-memory 8gb sandisk ultra microsd ongateway
-memory 32gb sandisk ultra sd on 3ds xl
format both with panasonic sd formatter... full format
then write zelda on microsd with the tool we all use
by the way this is working on 4.4 firmware since im not planning on upgrading.
go to ds profile without pressing L2,
play the game
save
if you need to get out of game PRESS THE DAMN POWER BUTTON. NOT HOME
play the game again. save is there and saved again and it works
no fucking emunand. im on 4.4 and i dont like messing with the nand
discovered something strange,
I installed the Emunand just to see how it works and everything. Now i had seen it i wanted to return to 4.5 without emunand, so i formatted the SD card. Now it still boots to the emunand, unless I use gateway 1.2. ( so i think i know how the emunand works, but i gonna check it now with a hex editor
I installed the Emunand just to see how it works and everything. Now i had seen it i wanted to return to 4.5 without emunand, so i formatted the SD card. Now it still boots to the emunand, unless I use gateway 1.2. ( so i think i know how the emunand works, but i gonna check it now with a hex editor
I did a diagnostics test before install them in and it failed all them all the SPI test and everything is it supposed to pass time after Im installed on emunand I'm a little confused with this why is it failing im on 4.4 ofw
Sorry but your recommendation is misleading.
It's well known that Gateway has an internal memory to store the saves and you need to do the procedure of going to home menu and close in order to copy the save to the SD. If you don't do this, the save will still be stored on the Red GW, but after changing to another game, this save file will be overwritten.
seems like you dont know how gaetway works, at least you dont know how to save your game properly without losing your savegame if you switch games.
i changed the to game luigi mansion
saved the game, new game slot 2, i had a saved in slot 1 too
rebooted. launched luigi again, i see the saved games
rebooted
changed to zelda
i see my zelda save
works for me. i can play zelda and save
the emuNAND thingy is pretty dangerous / unstable right now.
I setup everything for the emuNAND and it works so far, I checked if t he "GW3D" string was active and returned to the Homescreen ... and once I reenter the System Settings, it jumped back to the system NAND.
So watch out when and what application tries to update something.
Probably the reason why some of you guys accidentally updated their systen NAND.
Regards,
iCEQB
I setup everything for the emuNAND and it works so far, I checked if t he "GW3D" string was active and returned to the Homescreen ... and once I reenter the System Settings, it jumped back to the system NAND.
So watch out when and what application tries to update something.
Probably the reason why some of you guys accidentally updated their systen NAND.
Regards,
iCEQB
*sigh* that's how Gateway has worked since ever and that's why there are instructions about how to update through emuNAND.
okay I install emunand and everything probably reformat in fact it up and it boots in gateway mode but it says the firmware still 4.40 not GW 6.3 it says GW 4.40 so what am I doing wrong how do I update it to 6.3
Similar threads
- No one is chatting at the moment.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@
Jayro:
Eventhough the New 3DS XL is more powerful, I still feel like the DS Lite was a more polished system. It's a real shame that it never got an XL variant keeping the GBA slot. You'd have to go on AliExpress and buy an ML shell to give a DS phat the unofficial "DS Lite" treatment, and that's the best we'll ever get I'm afraid.+1 -
-
@
SylverReZ:
@Jayro, I don't see whats so special about the DS ML, its just a DS lite in a phat shell. At least the phat model had louder speakers, whereas the lite has a much better screen.+1
-
@
SylverReZ:
They probably said "Hey, why not we combine the two together and make a 'new' DS to sell".
-
-
-
@
Veho:
Nothing special about it other than it's more comfortable than the Lite+1
for people with beefy hands. -
-
-
-
