https://github.com/Plailect/Guide/wiki

This guide includes information to get you from nearly any situation to full arm9loaderhax CFW.

If you appreciate this guide and the work I put into maintaining it, I accept donations through both Bitcoin and PayPal.

 

[xZaggin]

is it normal that the downgrade keeps failing at the exact same spot?

(NFIRM) : V.0000 -> V.03553 FAIL

 

[Hasan Mutlu]

Hello Guys I try this tutorial and I did succesfuly all steps until to part5. on part 5 in step IV I forgot NAND Restore (keep a9lh) and I restore emuNAND_original.bin after that I tried to Hold Y on boot start but I can not open Emunand9 what can I do?

 

[Just Passing By]

Hello Guys I try this tutorial and I did succesfuly all steps until to part5. on part 5 in step IV I forgot NAND Restore (keep a9lh) and I restore emuNAND_original.bin after that I tried to Hold Y on boot start but I can not open Emunand9 what can I do?

Yikes. What firmware are you on now?

 

[Hasan Mutlu]

Yikes. What firmware are you on now?

10.7.0-32E

 

[Just Passing By]

10.7.0-32E

Mmn bad news, but you'll have to downgrade back to 9.2. Good thing is, you don't have to make the trip to 2.1 again if you have your OTP though.

 

[Hasan Mutlu]

Mmn bad news, but you'll have to downgrade back to 9.2. Good thing is, you don't have to make the trip to 2.1 again if you have your OTP though.

How can I downgrade can you help me please? I have OTP and nand backups on my computer and I use old 3ds

 

[Just Passing By]

How can I downgrade can you help me please? I have OTP and nand backups on my computer and I use old 3ds

The backups won't help in this case unless you have a hardmod. Do you have Oothax or Cubic Ninja?

 

[Hasan Mutlu]

The backups won't help in this case unless you have a hardmod. Do you have Oothax or Cubic Ninja?

I have not Oothax or Cubic ninja

 

[Just Passing By]

I have not Oothax or Cubic ninja

Sorry then, but that's your only way to get back to 9.2 and install a9lh. Get Oot (Nintendo selects edition) + Powersaves. It's only like $40.

 

[Hasan Mutlu]

Sorry then, but that's your only way to get back to 9.2 and install a9lh. Get Oot (Nintendo selects edition) + Powersaves. It's only like $40.

ok. I understand thank you for your answers

 

[gbatemplloyd]

i follow Plailect tutorials and installed a9lhax successful i also installed a lot of cia games......but when i go to settings it says VER 10.7.0-32E instead of CFW10.7.0-32E.
now my question is can i identify sysnand from cfw sysnand

another thing is when i power on my n3dsXL and hold the L trigger it boot to cakesfw, in the lower screen of the N3dsXL it says

Mounted SD card
Loaded config file
Loading NATIVE_FIRM...
Loaded FIRM
Loaded FIRM key
Decrypting FIRM
Decrypting the NCCH
Decrypting the exefs
DecryptingARM9 FIRM binary
Loading AGB_FIRM...
Failed to load FIRM ---------------------------(this is my main concern here is it normal or OK to have this)
Loading cakes
Loaded selected cakes

 

[sukiyaki]

I keep getting this when I tried to downgrade my emunand

(NFIRM) : V.0000 -> V.03553 FAIL

Is it normal? Or do I have to try downgrade it until it success?

 

[xZaggin]

I keep getting this when I tried to downgrade my emunand

(NFIRM) : V.0000 -> V.03553 FAIL

Is it normal? Or do I have to try downgrade it until it success?

I'm on the same boat as you...since saturday, 50 tries and counting....

 

[sukiyaki]

I'm on the same boat as you...since saturday, 50 tries and counting....

So I found my solution, instead of using cake or reinand, I'm using rxtools to downgrade and it works!

 

[xZaggin]

So I found my solution, instead of using cake or reinand, I'm using rxtools to downgrade and it works!

How do you change the rei files for Rx?

 

[marksteele]

If I'm restoring sysNAND-A9LHAX.bin what option do I use?

 

[shremi]

This guide is superb ..... i bought you a couple of beers .... I had a couple of issues but the guide is so well written that even included the fixes whenever i stumbled with an error.
Thanks for your hard work i really appreciate it .

 

[Jimmay123]

hey mate hope you can help
i got to section 4 the part where i load fbi the health and safety app but all it does it shows the nintendo 3ds screen on the top
been like it for 5 mins now

 

[GerbilSoft]

hey mate hope you can help
i got to section 4 the part where i load fbi the health and safety app but all it does it shows the nintendo 3ds screen on the top
been like it for 5 mins now

Did you inject FBI 1.4.17 or 2.0.x? 2.0.x requires some extra permissions that aren't available with Health & Safety, so you need to use the older version.

 

[Jimmay123]

Did you inject FBI 1.4.17 or 2.0.x? 2.0.x requires some extra permissions that aren't available with Health & Safety, so you need to use the older version.

https://github.com/Steveice10/FBI/releases/tag/1.4.17
got it here (link in the guide) cant figure it out im so close now too