Yeah it's normal behavior, and you can use autohosoff on hekate to prevent it.Huh! That's new to me!
Thx for the clarification!
I'll research more about this subject!
Switch OLED teardown V1/V2
- Thread starter grubgrub
- Start date
- Views 213,415
- Replies 1,130
- Likes 10
- Joined
- Oct 29, 2013
- Messages
- 1,457
- Trophies
- 1
- Location
- Brazil, Sao Paulo
- Website
- www.gamemod.com.br
- XP
- 1,673
- Country
I recommend you guys choose SD File Based to create Emummc, because partition based somehow will not restore your files after doing backup on SD card.
Also emunand bases on sysnand, sysnand bases on device's storage capacity, which is 64gb. If you choose SD partition based, you can move 29 full (~32gb) or 29x2 (create 2 more partition, ~32gb each). I think it will corrupt.
Correct me if I'm wrong here. And after Nintendo release HOS 13.0, ATM and Hekate fully supported, SD file based (on Oled) is more reliable than before.
Also emunand bases on sysnand, sysnand bases on device's storage capacity, which is 64gb. If you choose SD partition based, you can move 29 full (~32gb) or 29x2 (create 2 more partition, ~32gb each). I think it will corrupt.
Correct me if I'm wrong here. And after Nintendo release HOS 13.0, ATM and Hekate fully supported, SD file based (on Oled) is more reliable than before.
- Joined
- Oct 29, 2013
- Messages
- 1,457
- Trophies
- 1
- Location
- Brazil, Sao Paulo
- Website
- www.gamemod.com.br
- XP
- 1,673
- Country
Currently there's no way to create 58.3Gb partitions via Hekate but it will create a 29Gb fine, which will work for OLED as well.
If you want to create a full 64gb partition you can use any partitioning program to create a 58.3Gb (actually a 58.27Gb will suffice) trailing partition on your SD and Hekate will "see and use" it as a full partition for your OLED.
Cheers!
autohosoff =
0: Disable
1: If woke up from HOS via an RTC alarm, shows logo, then powers off completely
2: No logo, immediately powers off
Ah this will be helpful. Thank you.autohosoff =
0: Disable
1: If woke up from HOS via an RTC alarm, shows logo, then powers off completely
2: No logo, immediately powers off
- Joined
- Oct 29, 2013
- Messages
- 1,457
- Trophies
- 1
- Location
- Brazil, Sao Paulo
- Website
- www.gamemod.com.br
- XP
- 1,673
- Country
Thx, mate!autohosoff =
0: Disable
1: If woke up from HOS via an RTC alarm, shows logo, then powers off completely
2: No logo, immediately powers off
I had mine set as 0 and I will be making a test soon enough with it set as 2
- Joined
- Oct 29, 2013
- Messages
- 1,457
- Trophies
- 1
- Location
- Brazil, Sao Paulo
- Website
- www.gamemod.com.br
- XP
- 1,673
- Country
Setting it to 2 causes the console to do not show anything, just as the option says, immediately shutting it down.Thx, mate!
I had mine set as 0 and I will be making a test soon enough with it set as 2
The chip blinks purple then green, which is expected since it needs to do its thing before Hekate senses a power on after a power off to shut it down for good.
One "annoyance" down!
Cheers!
with autohosoff=2, when you turn the console off from horizon, it reboots to black screen, then the modchip comes into action again - you can see it from the status led - and as soon as the led becomes green, the console turns off automatically!Thx, mate!
I had mine set as 0 and I will be making a test soon enough with it set as 2
----------
EDIT: sorry, i wrote my answer when you were writing yours! glad that it worked for you too, mate!
It seems like the HWFLY team has created a new OLED SoC cable and bundles it with the DAT0 adapter in a set.
It works on both the Lite and Core variant.
As much as I would've wished for a revised PCB, this is probably better than nothing / as far as they will go.
If they would preinstall Spacecraft-NX 0.2 now on all units, we would be pretty much golden here.
It works on both the Lite and Core variant.
As much as I would've wished for a revised PCB, this is probably better than nothing / as far as they will go.
If they would preinstall Spacecraft-NX 0.2 now on all units, we would be pretty much golden here.
Thanks for letting us know!It seems like the HWFLY team has created a new OLED SoC cable and bundles it with the DAT0 adapter in a set.
It works on both the Lite and Core variant.
As much as I would've wished for a revised PCB, this is probably better than nothing / as far as they will go.
If they would preinstall Spacecraft-NX 0.2 now on all units, we would be pretty much golden here.
Nice, but in the end we still have to solder 6 wires.
PS for newbies like me: on the core installation there’s another step: fold the ribbon cable and connect the adapter - in which the 4 wires are soldered to - to the modchip motherboard.
What about the serial over USB connection on the modchip?
Iirc you could putty into it and press "r" to reset it - did they remove this feature?
It seems like the HWFLY team has created a new OLED SoC cable and bundles it with the DAT0 adapter in a set.
It works on both the Lite and Core variant.
As much as I would've wished for a revised PCB, this is probably better than nothing / as far as they will go.
If they would preinstall Spacecraft-NX 0.2 now on all units, we would be pretty much golden here.
Wow nice
This saves me having to solder onto the SX/HWFLY chip now
Which aliexpress link are you using?
I originally bought an SX Core pre-installed with Spacecraft-NX 0.1. Updated it to Spacecraft-NX 0.2, and attempted to install it in my OLED (and gave up and bought a HWFLY Lite instead due to size). Anyways, I took that SX Core with Spacecraft-NX 0.2 and put it in my old Original V1 Switch, and it wouldn't boot! I managed to downgrade to Spacecraft-NX 0.1 and then it booted, all else the exact same. Spacecraft-NX dev also mentions if you don't have an OLED, no reason to update...so it seems it's hard for HWFLY to accomodate to both OLED and non-OLED users. We know for certain Spacecraft-NX 0.1 'works' with both devices, but not the other way around.
You connect it to the USB port on your computer and you can flash it first.
Similar threads
