Sorry sir! I missed that question. Really really sorry!To answer my question myself :-)
The right file is: TRINKET_REBUG_SWITCHBOOT_PART2_V1.UF2
pOpY
Sorry sir! I missed that question. Really really sorry!To answer my question myself :-)
The right file is: TRINKET_REBUG_SWITCHBOOT_PART2_V1.UF2
pOpY
Yep.WOW Fusee-UF2 is really fast!!! Thanks.
I've seen that if non SD or missing payload.bin, the system shows a warning message and it auto turns off.
NICE!!!
Who wants a basic-beyond-basic UF2 file for their chip?
<nobody, right?>
Well, want no more!
Updating OP with an additional optional UF2 that has the following features:
That`s it.
- boots "payload.bin"
- Auto-corrects RCM "trap" (receives an i2c byte from MAX77620 telling it to shut off properly)
All fitted straps will be respected, obviously - meaning USB strap if fitted.
No modes
No multiple payloads
No logos
Nothing.
Approx, 45Kb when not in a C array
Just a UF2 that runs "payload.bin" on SD root.
Run Hekate, my mod of Hekate which I call Switchboot Pt.2, SXOS, ReiNX, memloader... in fact any payload.
Uses Atmosphere / Hekate hwinit. Loads well streams) payload.bin to a buffer, runs it. Thats all.
No need to keep updated. Unless something major happens, then I`ll update accordingly. I don`t anticipate many updates for this.
Check OP if anyone interested. Will be uploading soon. It will be called (it don`t fookin need a name) "Fusee-UF2". Thats all it is. Really.
That isn`t what it was made for.This is a really nice option @mattytrog, and also leaves me with a few questions.
- Would there be anyway way to add an option to select a payload, maybe when holding vol-? I mostly boot straight into the SX payload, but using this would need to get into hekate occasionally, and preferably without manipulating files on the SD card.
- Does this do a normal boot if no payload is found? If not, is there a payload that will boot OFW? I use separate SD cards for OFW and CFW and it would be great to autoboot into OFW.
The best for OFW is dualboot installation.
That isn`t what it was made for.
This is meant as a VERY basic, very long-lived method to launch a payload. Nothing more.
With SWITCHBOOT Part 2, you can boot / chainload payload.bin, just like this. However, if you press vol-, it will take you to my mod of Hekate.
There is also a version of Argon-nx built in (which is set up to mode 3) which gives you auto-chainloading and a touch-screen menu. However, it isn`t finished.
From what I understand, you will burn fuses booting OFW and updating when running the dual boot method. If that's incorrect, I'm happy to disable my volume strap.
Yeah part 1 is the strap control. Choose both or joycon only. Drag this uf2 on the chip first.Hi Matty,
i'm a bit confused about the new 2 parts.
If i have trinket with universal fitting and used switchboot and simple-uf2 until now and i want to update,
do i need to flash switchboot part 1 (https://github.com/mattytrog/Switch.../Trinket/SWITCHBOOT_TRINKET_JOYCON_VOLUME.uf2)
again or is it the same like the old switchboot ?
What file do i choose for the switchboot part2 for universal fitting with trinket ?
or is the file https://github.com/mattytrog/Switchboot_PART_2/blob/master/Switchboot-V1.0/Switchboot Part 2 UF2/TRINKET_REBUG_SWITCHBOOT_PART2_V1.UF2
for trinket and switchme chips with universal fitting?
You do not need to flash part one every update. You only need to flash ait of you want to change how your console boots.
Normally, and I say "normally"... Flashing part 1 overwrites part 2. So if you flash part 1, you also need to flash part 2. However, if the other way round, you don't.Curious, if I flash part 1, to change my straps, do I also need to flash part 2 as well? I have, but curious if it's actually needed.
Thanks
Yeah part 1 is the strap control. Choose both or joycon only. Drag this uf2 on the chip first.
Then do part 2 of you want all the tools etc.
If you just want a basic "payload launcher", you can drag over Fusee-UF2 which will give you this.
You do not need to flash part one every update. You only need to flash ait of you want to change how your console boots.
Hope I clear enough
Yes siris the file https://github.com/mattytrog/Switchboot_PART_2/blob/master/Switchboot-V1.0/Switchboot Part 2 UF2/TRINKET_REBUG_SWITCHBOOT_PART2_V1.UF2
for trinket and switchme chips with universal fitting?
Nothing nees to be done with the bootloader.Probably dumb question, but if I've got a Trinket flashed with Switchboot (but not yet fitted) that I want to switch to Fusee-UF2, is it enough to just drag the new UF2 onto it or do I restore the old bootloader first?