oled switch with chip does not start hekate

[Omegis]

Sorry, I'm new here, I'm not very good at it yet, I searched and couldn't find anything, not even on Google. I have an OLED switch with a chip, it was working well, I gave it to my girlfriend to play and when she returned it to me, it didn't go into hekate, remember the volume + power and it entered hekate, I had turned it off and now it doesn't even enter hekate when looking at the lights on the chip it shows blue light and then green I also updated the files to the most recent versions but nothing thanks for your help guys sorry for my bad english

 

[Hassal]

What do you get when you eject the SD card?

 

[Omegis]

boot the console to stock mode

 

[Hassal]

boot the console to stock mode

It boots to stock?

 

[Omegis]

yes basically it turns on as if it didn't have a chip

 

[Hassal]

If you're getting green after glitching it means your modchip and connections are intact. Maybe your modchip is acting up.

 

[Omegis]

I appreciate you answering, I ended up taking it to the guy who installed the magic for me, some cables had come loose because it had fallen, he fixed it and everything but it lasted 1 day and it doesn't come back to hekate, a blue LED keeps coming out and then it goes to green and flashes and the light turns green again and I read a lot and I think the chip should be reset

 

[jkyoho]

Record the green light blinking sequence and post the video here. I guess you have dat0 adapter on the console

 

[Omegis]

Here

 

[jkyoho]

long and short yellow blink.
that's exactly telling you dat0 not connected.

 

[impeeza]

Also remember in order to get into Hekate's NYX you need to press VOL- no VOL+

 

[Omegis]

Thank you very much tomorrow I have to take it to the guy who installed the chip so I can tell him, when everything is ok I will come back to post if it was that or if I had something more grateful guys

 

[Space_Goddess_Samus_Aran]

i had same problem with my oled the dat0 adapter was faulty so i sent it back and got it fixed.

 

[Omegis]

Hello, thank you all for helping me, some cables had come loose so I told the guy who installed the chip to check it for me and now everything is normal, thank you all very much