I had 3 wads fail on me installing. I was going from 4.1US to 4.2US. They were IOS50, IOS248 v21d and IOS249 v21d. What should I do to get these to install? Will my wii work without these?
Thanks
Thanks
the advanced custom download feature in Modmii will allow you to build a d2x [58] and direct installation to 248 or whatever slot you want....but why do you want this? 249[56] and 250[57] are all you will need...exzavier said:Is modmii missing the cIOS248[58]-v21d2x3 ? I cannot find it in the menu and that is one of the ISO this guide installs.
I re downloaded 249 and 50 just now from ModMii and tried to install them and I got an error -1022 for both.
I used Wii Mod v2.6 to try to install them.
brausm08 said:the advanced custom download feature in Modmii will allow you to build a d2x [58] and direct installation to 248 or whatever slot you want....but why do you want this? 249[56] and 250[57] are all you will need...exzavier said:Is modmii missing the cIOS248[58]-v21d2x3 ? I cannot find it in the menu and that is one of the ISO this guide installs.
I re downloaded 249 and 50 just now from ModMii and tried to install them and I got an error -1022 for both.
I used Wii Mod v2.6 to try to install them.
as far as installation goes, what IOS is WiiMOD running on? ...IIRC, it defaults to [58]... try reloading it to run on 236 or any cIOS[38] and your wad installations should go in fine.
I don't know what you are suggesting (since your post doesn't make any sense), but if you believe that a failtube guide is ever a good idea, you are dead wrong.gautam said:a good 'youtube' guides for soft modding?isnot it?
roysolid said:hi I have hacked wii but I think it in a mess don't ask me why
so I thought if I removed the old hack and tried this hack some of the problems can be fix ?
like I tried Firmware-Updater_4.3 but failed in download
and when using Cios 21 as ios58 it fellas to download from the net
and many thing
so how can I remove the old hack to use this hack?
I would recommend you download the up42 for your region, start the homebrew channel, and run YAWMM Batch. This will install all fresh system ios's. Then follow the modify 4.2 section.
QUOTE(icebrg5 @ May 18 2011, 09:51 PM) A few questions
Can the priiloader 236 mod app be used on any wii? Even ones without a valid wifi connection? I know the wifi issue with the HBC is what caused priiloader to crash all the time.Is it fixed now?
Also can the d2x v4 cios's be used with older outdated loaders like wiiflow?
I know wiiflow isn't really an older outdated loader but it hasn't been updated in awhile now and i know that d2x v4 cios's do not show up properly in wiiflow when showing what base version is being used,but can wiiflow still use them?
QUOTE said:I would recommend you download the up42 for your region, start the homebrew channel, and run YAWMM Batch. This will install all fresh system ios's. Then follow the modify 4.2 section
roysolid said:QUOTE said:I would recommend you download the up42 for your region, start the homebrew channel, and run YAWMM Batch. This will install all fresh system ios's. Then follow the modify 4.2 section
my wii is 4.2u so no need for updated to 4.3u with save update ?
and I used wad batch installer so the work is done
zoots said:Hey guys!
I followed all the instructions on the website here and now I cant get my Wii to start.
(Ive done this before on Wii v4.1u) but my friend have a new one 4.3u (black) and we did the smash stack hack, everything was fine.
We actually installed everything like you said in the instructions WITHOUT any errors.
We got to that part "Hack Suggestions: Auto press A at health screen, Block disc updates, Block online updates, Remove NoCopy save file protection, Recovery mode press d-pad..., Region free everything." after that, we selected System Menu and the Wii restarted..
but now we are stuck on a black screen saying "Wii 4.3(USA)"
Ive been looking on the net, some people were sayin that it might be cause by the Auto press A at health screen.. but I dont think its the case.
I did my nand backup but I cannot even use it since the screen is just all black.
Is there anything I can do to make it work properly?
Thanks in advance!