Hacking Hardware Picofly - a HWFLY switch modchip

thesjaakspoiler · Wednesday at 1:10 AM

bf3itu said:
Very good night. Could someone help me, how to edit that written part of HEKATE.

They compiled hekate from source and changed some string in probably nyx.c
https://github.com/CTCaer/hekate/blob/master/nyx/nyx_gui/nyx.c
That custom string ends up in nyx.bin :

superxoi · Thursday at 4:59 AM

keedros said:
Not sure if I can post this here, but I'm getting somewhat desperate since there seems to be a lack of information on my issue.

Recently I discovered a short on a capacitor beside the sd card/game card reader pcb port on an HEG-CPU-01 board I've been trying to repair.

My question is if this is shorted, is there a chip that may be defective & this is simply an indication of its failure, or does the capacitor need to be replaced itself?

Also what would the value be of the capacitor if it needs to be replaced?

Any help would be greatly appreciated. Thanks!

That component is in normal state. Don't waste your time on it.

Diogen_Karpis · Thursday at 2:10 PM

joaoneves said:
And which good adapters can I use? Is there any photo where I can see which ones are good? Thank you

use kamikaze, mas se vc usar aquele flex , poe na ponta um pouco de estanho de ambos lados.

Nephiel · Thursday at 2:45 PM

Diogen_Karpis said:
se vc usar aquele flex , poe na ponta um pouco de estanho de ambos lados.

I wouldn't. A solder-covered contact point won't work any better (unless it's actually soldered) and the ENIG finish at least won't oxidize.

keedros · Thursday at 9:02 PM

superxoi said:
That component is in normal state. Don't waste your time on it.

I ended up testing it some more & found this out after frustrating over it, thanks for the reply though! I appreciate it anyhow.

rr8400 · 2024-11-16T04:16:56+0000

I got blue, white light and then my screen went black. No "No SD card" message. Does anyone know what I did wrong?

cowboy619 · 2024-11-16T05:48:10+0000

rr8400 said:
I got blue, white light and then my screen went black. No "No SD card" message. Does anyone know what I did wrong?

Post install pictures - post diode readings on all points and also what switch console

AgistinAgistin · 2024-11-16T13:35:07+0000

RTXbothunter said:
apakah ada yang mengalami masalah ini?
saya berhasil masuk ke hekate 5 kali pertama
saya mencoba mem-boot hos dengan 2.61.uf2
emmc yang didukung, dibuat emunand kemudian ketika setelah menyuntikkan hekate 6 membawa saya ke masalah ini
saya mencoba membersihkan picofly dengan flash_nuke.uf2 tetapi tidak berhasil sama sekali
View attachment 366602

Post automatically merged: Yesterday at 1:37 PM

RTXbothunter said:
apakah ada yang mengalami masalah ini?
saya berhasil masuk ke hekate 5 kali pertama
saya mencoba mem-boot hos dengan 2.61.uf2
emmc yang didukung, dibuat emunand kemudian ketika setelah menyuntikkan hekate 6 membawa saya ke masalah ini
saya mencoba membersihkan picofly dengan flash_nuke.uf2 tetapi tidak berhasil sama sekali
View attachment 366602

Aku punya masalah yg sama seperti mu apakah kamu ada sulus mya
Bahasa Indonesia:

Post automatically merged: Yesterday at 1:38 PM

RTXbothunter said:
apakah ada yang mengalami masalah ini?
saya berhasil masuk ke hekate 5 kali pertama
saya mencoba mem-boot hos dengan 2.61.uf2
emmc yang didukung, dibuat emunand kemudian ketika setelah menyuntikkan hekate 6 membawa saya ke masalah ini
saya mencoba membersihkan picofly dengan flash_nuke.uf2 tetapi tidak berhasil sama sekali
View attachment 366602

Aku punya masalah yg sama seperti mu apakah kamu ada sulus mya
Bahasa Indonesia:

rr8400 · 2024-11-17T01:11:02+0000

cowboy619 said:
Post install pictures - post diode readings on all points and also what switch console

Actually, I resoldered all connectors and now I'm getting the =*** and =*== error. eMMC init failed I guess. What could cause that issue? Switch Lite

Post automatically merged: Today at 1:11 AM

I'll send the values in a bit.

Edit:
GND: 0.200
3v3: 1.103
DAT0: 0.880
CMD: 0.850
CLK: 0.970
RST: 1.870
CPU: 0.687

Post automatically merged: Today at 5:44 PM

Yeah, still getting this error. Can anyone help me on how to fix it?

A4EVA · 2024-11-17T18:32:55+0000

Hello everyone, It will be possible to rebuild the picofly fw with a different payload ? (payload.h in the picofly repo) I found the Spacecraft_NX sdloader repo and I was thinking if it was possible to use it instead of the picofly one.

Hacking Hardware Picofly - a HWFLY switch modchip

Well-Known Member

Well-Known Member

Member

Artificer

New Member

Active Member

Well-Known Member

New Member

Active Member

Attachments

New Member

Similar threads

Popular threads in this forum