Hacking [Tutorial] How to access NNID and eShop on 9.5.0-23 Emunand

[Aroth]

Yes, I am using HANS.

Yeah then idk. I haven't seen that error before.

 

[BlueMaxima]

Emunand is emunand at this point, regardless of if you used a program like Emunand9 or GW to make it, and no it does not matter. You can't select it because you are downloading a specific title by TitleID.

It just sounds bad because there's a bunch of things that are like "do not get anything outside of this specific CIA for this specific model or YOU WILL BRICK" and suddenly this one is fine? If you're sure, I'll do it. And yeah, 9.2 will work fine right?

 

[Plochan]

I am on n3ds, emunand 9.5
nver is updated as instructed, and I go through hans to spoof fw and start eshop

but I get a message that I need to accept the latest version of the nintendo service user agreement and privacy policy, only option is to return to home menu.
am I miss something?

 

[Aroth]

It just sounds bad because there's a bunch of things that are like "do not get anything outside of this specific CIA for this specific model or YOU WILL BRICK" and suddenly this one is fine? If you're sure, I'll do it. And yeah, 9.2 will work fine right?

9.2 Emunand or Sysnand?

I would highly recommend updating emunand to 9.5.0-23X before you attempt to do this, if for now other reason than because I cannot insure via personal experience that it works properly on anything else as a starting point.

 

[andrexd]

Is there a tutorial for accessing e-shop and linking nnid on o3ds emunand 10.3?

 

[Aroth]

I am on n3ds, emunand 9.5
nver is updated as instructed, and I go through hans to spoof fw and start eshop

but I get a message that I need to accept the latest version of the nintendo service user agreement and privacy policy, only option is to return to home menu.
am I miss something?

That is different and new. Sounds like you havent tried to do anything "online" yet with your emunand since you set it up.

 

[BlueMaxima]

9.2 Emunand or Sysnand?

I would highly recommend updating emunand to 9.5.0-23X before you attempt to do this, if for now other reason than because I cannot insure via personal experience that it works properly on anything else as a starting point.

Both. Don't know how to update safely.

 

[Aroth]

Is there a tutorial for accessing e-shop and linking nnid on o3ds emunand 10.3?

Yeah, do it normally.

Seriously.

10.3.0-28X is the highest firmware so if you have an O3DS and its emunand is fully updated you can access all online features with no funny workarounds.

--------------------- MERGED ---------------------------

Both. Don't know how to update safely.

install sysupdater (I would suggest 0.4.1 as its the latest "official" release, the 0.4.2 should only be used for downgrading atm imo), then grab a N3DS 9.5.0-23 update cia package for your region from that iso site.

Put the cias in the updates folder and boot up emunand, then use sysupdater to update it.

The warnings about not using sysupdater to update with GW or rxMode only apply to sysnand. You can safely use it to update emunand without worry.

If you want to be extra safe/careful, back up the emunand first.

 

[andrexd]

Yeah, do it normally.

Seriously.

10.3.0-28X is the highest firmware so if you have an O3DS and its emunand is fully updated you can access all online features with no funny workarounds.

That's what I thought, but I get this error everytime I try to link my nnid (022-2634)

 

[Aroth]

That's what I thought, but I get this error everytime I try to link my nnid (022-2634)

This is what I am seeing.

"In order for NNID to work after unlinking sysNAND/emuNAND, you have to log into your NNID from sysNAND. This links back with Nintendo servers telling them you own the "new" license on the 3DS, which allows emuNAND to work again."

Are your nands unlinked? If so did you accomplish it by doing a system format from system settings inside emunand?

If yes to both then it sounds like thats the problem.

 

[BlueMaxima]

install sysupdater (I would suggest 0.4.1 as its the latest "official" release, the 0.4.2 should only be used for downgrading atm imo), then grab a N3DS 9.5.0-23 update cia package for your region from that iso site.

Put the cias in the updates folder and boot up emunand, then use sysupdater to update it.

The warnings about not using sysupdater to update with GW or rxMode only apply to sysnand. You can safely use it to update emunand without worry.

If you want to be extra safe/careful, back up the emunand first.

Will installing the sysUpdater 0.4.1 CIA to emuNAND via FBI, then running it via emuNAND work the same way?

 

[Aroth]

as long as it is installed to and ran from emunand it will work.

 

[andrexd]

This is what I am seeing.

"In order for NNID to work after unlinking sysNAND/emuNAND, you have to log into your NNID from sysNAND. This links back with Nintendo servers telling them you own the "new" license on the 3DS, which allows emuNAND to work again."

Are your nands unlinked? If so did you accomplish it by doing a system format from system settings inside emunand?

If yes to both then it sounds like thats the problem.

My nands are unlinked, so I need to do a system format on emunand and then link nnid on emunand?

 

[BlueMaxima]

as long as it is installed to and ran from emunand it will work.

Well I buggered my emuNAND somehow. It comes up with "Opening Home menu, do not turn off the power..." and then that disappears after a few seconds, leaving a black screen. I installed the CIA for sysUpdater and ran it fine but I looked away for a minute and then my 3DS just autorebooted. I can still get to HBL fine.

 

[Aroth]

My nands are unlinked, so I need to do a system format on emunand and then link nnid on emunand?

Honestly, idk. Your situation seems weird.

--------------------- MERGED ---------------------------

Well I buggered my emuNAND somehow. It comes up with "Opening Home menu, do not turn off the power..." and then that disappears after a few seconds, leaving a black screen. I installed the CIA for sysUpdater and ran it fine but I looked away for a minute and then my 3DS just autorebooted. I can still get to HBL fine.

The auto-rebooting seems weird. Do you have a backup of the emunand you can inject?

 

[BlueMaxima]

The auto-rebooting seems weird. Do you have a backup of the emunand you can inject?

Nope. Should've backed it up. Dammit. Is there any way I can get sysUpdater to run on the emuNAND again with only access to HBL? Maybe I can stick 9.2 in there again and have it work.

 

[WallK]

What to do with NNID? I managed to open eShop on rxTools then press download badge arcade for a test. It said something like You need to link NNID now and then black screen

--------------------- MERGED ---------------------------

Ok, I just started NNID app in HANS. Worked laggy but successfully

 

[Ekaitz]

I used this tutorial, I can access the eshop. It works well. But I can't download anything, I don't know why...

RxTools emunand 9.5 (CVer + Nver)

 

[ArielArashi]

Well I buggered my emuNAND somehow. It comes up with "Opening Home menu, do not turn off the power..." and then that disappears after a few seconds, leaving a black screen. I installed the CIA for sysUpdater and ran it fine but I looked away for a minute and then my 3DS just autorebooted. I can still get to HBL fine.

Hi, i had the same issue, fixed it by restoring an emuNAND backup, and, into emuNAND, resetting the menu as if i wanted to delete homemenuhax.
After that ran sysUpdater with 9.5.0-23E CIAs and now works fine.
Can you try that?

--------------------- MERGED ---------------------------

Nope. Should've backed it up. Dammit. Is there any way I can get sysUpdater to run on the emuNAND again with only access to HBL? Maybe I can stick 9.2 in there again and have it work.

Also, you can do a sysNAND backup (if you didn't unlink them yet) and restore to emuNAND (I used Decrypt9)

 

[Plochan]

I used this tutorial, I can access the eshop. It works well. But I can't download anything, I don't know why...

RxTools emunand 9.5 (CVer + Nver)

same here
RxT but only with Nver on n3ds 9.5