V1 Switch Post Picofly Backlight Doesn't Work But Screen Functions Fine + Works Docked

[obnoxiousmods]

I did a picofly and after like 30-40 v1/v2s i had my first damage occur on a v1/v2
the display works but the backlight does not function what so ever, i can see the screen fine
what do i need to replace or look into to fix this
is the backlight built into screen?

let me know any tips please

 

[thesjaakspoiler]

Yes, the backlight is integrated in the screen but the drivers for the backlight voltage is on the main board.
It might be a damaged cable, a misaligned cable, a loose connector, scratches on the PCB, or maybe you knocked off / shorted some components.
Start with a visual inspection and if that doesn't turn on anything, then it's time to get out your multimeter or preferable a scope.

Just search this forum for information about fixing broken backlights.

There is a detailed video for the LITE here :

 

[obnoxiousmods]

Yes, the backlight is integrated in the screen but the drivers for the backlight voltage is on the main board.
It might be a damaged cable, a misaligned cable, a loose connector, scratches on the PCB, or maybe you knocked off / shorted some components.
Start with a visual inspection and if that doesn't turn on anything, then it's time to get out your multimeter or preferable a scope.

Just search this forum for information about fixing broken backlights.

There is a detailed video for the LITE here :

thanks a lot ill give it a watch and a try