Thread Status:
Not open for further replies.
  1. innercy

    innercy GBAtemp Advanced Fan
    Member

    Joined:
    Oct 22, 2006
    Messages:
    777
    Country:
    i think u can try skip updating your emunand. make sure u have install an cia installer specifically FBI which u can refer 1st page. u can then updating emunand manually by downloading all cia for the preferred fw.
     
  2. Rak

    Rak Advanced Member
    Newcomer

    Joined:
    Jun 19, 2015
    Messages:
    79
    Country:
    Would that allow me to play all recent games? especially monster hunter 4? if so then I will try that tomorrow when I wake up.
     
  3. innercy

    innercy GBAtemp Advanced Fan
    Member

    Joined:
    Oct 22, 2006
    Messages:
    777
    Country:
    yea sure, rxtools support till new current fw which is 9.8
     
  4. samiam144

    OP samiam144 Régulier
    Member

    Joined:
    Aug 19, 2007
    Messages:
    2,876
    Country:
    Canada
    Did you put the "v" in the version box? It should just be
    Code:
    3665

    That depends, does your Health and Safety app boot FBI instead? It should be okay, but you might not have FBI in your emunand anymore unless you installed the regular CIA (the one with the FBI Icon)
    Did you update your emunand to 9.8 first? The injection is only suppose to work on 9.X because of different ID's or something like that
    Do you have firmware.bin and slot0x25KeyX.bin on your sd card?
    Do you have a working slot0x25KeyX and firmware.bin on your sd card? It won't boot without it
    Use rxtools.dat if you want Smash and MH4U without gba/Dsi games, or choose rxtools_dsi.dat and rename it to rxtools.dat if you want Gba/Dsi games but no Smash or MH4U
    You were suppose to update your EMUNAND, not sysnand :/
     
  5. shepe

    shepe GBAtemp Regular
    Member

    Joined:
    Feb 2, 2009
    Messages:
    113
    Country:
    Yep Emunand updated to the latest, just the hea;lth and safety app refuses to launch and requests that I download it again from the eshop

    Edit

    Has anyone actually succesfully used this method without a gw etc just injecting into the H&S app? im asking as currently I dont believe it works at all, have followed this guide multiple times with the same result "this title cannot be launched please download it again from the nintendo eshop"
     
    Last edited: Jun 21, 2015
  6. srwgin

    srwgin GBAtemp Advanced Fan
    Member

    Joined:
    Aug 13, 2013
    Messages:
    516
    Country:
    China
    I am also the situation
    my 3ds is 3dsll what about you
     
  7. VerseHell

    VerseHell GBAtemp Psycho!
    Member

    Joined:
    Jun 29, 2014
    Messages:
    3,070
    Country:
    France
    Yes I tested it two times on my 9.8E emunand just to be sure, and Riku (the one who provided the tmd and app files) tested it too.
    Are you sure you're using the last pack (1.4) and updated your emunand before the fbi injection ?
     
  8. srwgin

    srwgin GBAtemp Advanced Fan
    Member

    Joined:
    Aug 13, 2013
    Messages:
    516
    Country:
    China
    I am sure using last pack 1.4
    content_JPN
    00000000.tmd CRC D337F373
    00000002.app CRC 61402BB9
     
  9. DjoeN

    DjoeN Captain Haddock!
    Member

    Joined:
    Oct 21, 2005
    Messages:
    5,420
    Country:
    Belgium
    No i did not put the v in front :)
    but i did manage to download it on another pc today, on my pc it still doesn't download and gives that error, anyway, i have it, that's the most important thing ;)
     
    samiam144 likes this.
  10. VerseHell

    VerseHell GBAtemp Psycho!
    Member

    Joined:
    Jun 29, 2014
    Messages:
    3,070
    Country:
    France
    I just tested with my japanese emunand and yes there is a problem with the files names. Rename the *tmd 00000001.tmd before injecting it and it should work.
    There's no problem with the EU files though. Testing with a US emunand now.

    Edit : Same problem with the US files. Here's a new version with the correct filenames : http://www.jheberg.net/captcha/fbi-injection-v15/
     
    Last edited: Jun 21, 2015
    samiam144 likes this.
  11. NextLight

    NextLight Member
    Newcomer

    Joined:
    Dec 31, 2012
    Messages:
    12
    Country:
    Italy
    Yes I do. Though in the bottom-left corner of rxTools it only shows EmuNAND and NewKeyX, i'm not sure if firmware.bin (CRC 5F9A3E9E) should be there too. I also tried to download it again but with no luck.

    EDIT: Ok I got it, I'm retard. I forgot the key was in hex and i copied it as if it was ascii. Sorry :P
     
    Last edited: Jun 21, 2015
    samiam144 likes this.
  12. VerseHell

    VerseHell GBAtemp Psycho!
    Member

    Joined:
    Jun 29, 2014
    Messages:
    3,070
    Country:
    France
    Are you sure your slot0x25KeyX.bin is filled with the 7.X key ?
     
  13. NextLight

    NextLight Member
    Newcomer

    Joined:
    Dec 31, 2012
    Messages:
    12
    Country:
    Italy
    Yes it was filled but in the wrong way, I just edited my post :) Thanks for your help anyway.
     
  14. shepe

    shepe GBAtemp Regular
    Member

    Joined:
    Feb 2, 2009
    Messages:
    113
    Country:
    Yes so below are steps im doing in this order

    1) Launch gateway and format emunand
    2) Launch RX-tools -> Boot RXmode
    3) system settings -> Update emunand which upgrades to 9.8.0-25E
    4) RX tools create fat 16 XOR key
    5)copy key to the fbi injection folder on my laptop
    6)emunand tool to dump emunand to fbi injection folder
    7)run decrypt.bat
    8)open created emuNAND.fat16.bin in winimage
    9) browse to \title\00040010\00022300\content
    10)delete 00000003.tmd and 00000008.app
    11) inject 00000001.tmd and 00000008.app from FBI injection\content_EUR
    12)save and exit winimage, then run rencrypt.bat
    13)use emunand tool to inject emuNAND.bin back into emunand
    14)launch RXtools -> boot RXmode
    15)attempt to launch h&s app at here is where it fails

    any ideas what im doing wrong?
     
  15. srwgin

    srwgin GBAtemp Advanced Fan
    Member

    Joined:
    Aug 13, 2013
    Messages:
    516
    Country:
    China
    I just want to know anyone success on 3DSLL/3DSXL

    — Posts automatically merged - Please don't double post! —

    you use 3DS or 3DSXL
     
  16. shepe

    shepe GBAtemp Regular
    Member

    Joined:
    Feb 2, 2009
    Messages:
    113
    Country:
  17. VerseHell

    VerseHell GBAtemp Psycho!
    Member

    Joined:
    Jun 29, 2014
    Messages:
    3,070
    Country:
    France
    Hmm, it's look like the tmd filename is not the same for everyone, it was
    00000001.tmd for me. Try to rename it
    00000003.tmd before injecting it.
     
  18. shepe

    shepe GBAtemp Regular
    Member

    Joined:
    Feb 2, 2009
    Messages:
    113
    Country:
    Unfortunately same result, is there anything else I can try or am I stuck with it not working?
     
  19. VerseHell

    VerseHell GBAtemp Psycho!
    Member

    Joined:
    Jun 29, 2014
    Messages:
    3,070
    Country:
    France
    What is your original sysnand firmware ?
     
  20. shepe

    shepe GBAtemp Regular
    Member

    Joined:
    Feb 2, 2009
    Messages:
    113
    Country:
    7.1.0-14E
     
Loading...

Hide similar threads Similar threads with keywords - [Tutorial], Installing, Firmware

Thread Status:
Not open for further replies.