Misc Others Television says 'no signal' after launching WiiWare/Virtual Console (pokemon blue works only)

[hayder123]

Hi all. This is my first post on GBATemp regarding a problem.
So I have 2 wiiware titles (defend your castle and wario ware diy showcase) and 8 VC titles
whenever i launch any of them, they just black out my screen and my television says there's no signal. The only VC channel that works on my wii and TV is Pokemon blue. (HDMI and RCA)
I've tried all titles on both HDMI (through Wii2Hdmi adapter) and RCA (included av cable through a rca to side av converter, my tv has no rca ports) and they dont work.

Does anyone know why this happenes and How I can fix it?
Thanks.

-Hayder

 

[JuanMena]

Damn... different possible problems...

First and probably more obvious, your TV doesn't support the EDTV signal.
But that's not probable because you wouldn't even see the home wii menu.

Second possible problem, might be that your WiiWare titles doesn't support the EDTV signal, thus, they boots in 480i, and probably your TV doesn't support 480i with the Wii2HDMI adapter.

Third possible problem... your Wii video port might start to get faulty.

Fourth possible problem, you have a faulty Wii2HDMI adapter.

Fifth possible option, you have bad copies of wads. Reinstalling them might solve the issue as long as you completely delete the title's tickets with WadManager and the wad itself (of the title you want to delete)

Sixth... probably a combination of two or more?

Maybe a cIOS/IOS problem?

 

[JuanMena]

Sidenote:

Rule out options by testing in another TV, with other cables or another Wii.

 

[godreborn]

On the wii or vwii?

 

[hayder123]

Strange, I brought my wii 29 days ago and the adapter only 26 days ago. Plus, about 480i, I tried it using RCA signal to no avail.
I don't see why my adapter would be faulty, considering i brought it only 26 days ago, on the 4th may. I haven't tried checking the WADs though. Thanks for the help.

 

[hayder123]

On the wii or vwii?

On a Wii RVL-001

 

[hayder123]

Sidenote:

Rule out options by testing in another TV, with other cables or another Wii.

Only television I hav is in the living room. i have an old tv, but i've lost the power cable for it.

 

[godreborn]

Nm, then.

 

[godreborn]

It's most likely a cios issue. If it had been the vii, I'd say it's the fat library of d2x 52. You want to be using that ob wii and vwii, not beta 53. It contains no fat library, so wiiware games are unlikely to work.

 

[hayder123]

It's most likely a cios issue. If it had been the vii, I'd say it's the fat library of d2x 52. You want to be using that ob wii and vwii, not beta 53. It contains no fat library, so wiiware games are unlikely to work.

If it were possibly a CIOS issue, what would you reccomend I install?

 

[CoolMe]

If it were possibly a CIOS issue, what would you reccomend I install?

Post a syscheck here.
Are these wad channels installed on the sd card, or do you have a Sneek/Uneek setup?
Are you launching them from the Wii home menu? If so i would suggest launching them from either Wiiflow or USBLoaderGX (use this btw).
It's most likely because you're using wads (or versions of games) that are out of your console's region, so they give you black screen when using composite cables. Though that shouldn't happen with an hdmiAdapater.
Just use the 2 loaders above they should load.

 

[SaulFabre]

The only VC channel that works on my wii and TV is Pokemon blue. (HDMI and RCA)

Pokémon Blue VC is an unofficial VC channel by the way.

I think you're using 0RANGECHiCKEN's "custom VC" release of Pokémon Blue on Wii?

Please also consider posting a sysCheck
https://gbatemp.net/threads/posting-a-system-check.300279/

 

[hayder123]

Post a syscheck here.
Are these wad channels installed on the sd card, or do you have a Sneek/Uneek setup?
Are you launching them from the Wii home menu? If so i would suggest launching them from either Wiiflow or USBLoaderGX (use this btw).
It's most likely because you're using wads (or versions of games) that are out of your console's region, so they give you black screen when using composite cables. Though that shouldn't happen with an hdmiAdapater.
Just use the 2 loaders above they should load.

I tried to use USBLoaderGX to load them, but that was out of the question. They were not installed on an sd card. But I haven't tried installing correct region VC and wiiware titles though. I'll try that. Thanks

 

[hayder123]

Here's the SYSCheck results:
SysCheck HDE v2.4.0 HacksDen Edition by JoostinOnline, Double_A, R2-D2199, and Nano
...runs on IOS58 (rev 6175).

Region: PAL
System Menu 4.3E (v514)
Priiloader installed
Drive date: 07.14.2008
Homebrew Channel 1.1.2 running on IOS58

Hollywood v0x11
Console ID: 90393678
Console Type: Wii
Shop Channel Country: United Kingdom (110)
Boot2 v4
Found 94 titles.
Found 47 IOS on this console. 15 of them are stubs.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 256): Stub
IOS12 (rev 525): No Patches
IOS13 (rev 1031): No Patches
IOS14 (rev 1031): No Patches
IOS15 (rev 1031): No Patches
IOS16 (rev 512): Stub
IOS17 (rev 1031): No Patches
IOS20 (rev 256): Stub
IOS21 (rev 1038): No Patches
IOS22 (rev 1293): No Patches
IOS28 (rev 1806): No Patches
IOS30 (rev 2816): Stub
IOS31 (rev 3608): Trucha Bug, ES Identify, NAND Access
IOS33 (rev 3607): No Patches
IOS34 (rev 3607): No Patches
IOS35 (rev 3607): No Patches
IOS36 (rev 3607): No Patches
IOS37 (rev 5662): No Patches
IOS38 (rev 4123): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3606): No Patches
IOS43 (rev 3606): No Patches
IOS45 (rev 3606): No Patches
IOS46 (rev 3606): No Patches
IOS48 (rev 4123): No Patches
IOS50 (rev 5120): Stub
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5662): No Patches
IOS55 (rev 5662): No Patches
IOS56 (rev 5661): No Patches
IOS57 (rev 5918): No Patches
IOS58 (rev 6175): USB 2.0
IOS60 (rev 6400): Stub
IOS61 (rev 5661): No Patches
IOS70 (rev 6912): Stub
IOS80 (rev 6944): Trucha Bug, NAND Access
IOS222 (rev 65280): Stub
IOS223 (rev 65280): Stub
IOS249[37] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS250[56] (rev 65535, Info: d2x-v10beta52): Trucha Bug, NAND Access, USB 2.0
IOS251[38] (rev 65535, Info: d2x-v10beta52): Trucha Bug, ES Identify, NAND Access
IOS254 (rev 65281): BootMii
BC v6
MIOS v10
Report generated on 05/31/2022.

 

[CoolMe]

I tried to use USBLoaderGX to load them, but that was out of the question.

How exactly? It's the same procedure, you just launch them from the loader instead of the home menu, and with the benefit of bypassing the region limitations..

They were not installed on an sd card.

On the Wii's nand? Same, the above would work.

But I haven't tried installing correct region VC and wiiware titles though. I'll try that. Thanks

Pokémon Blue is a made up wad and is not official, and i know it worked for you, i just thought you should know.

 

[CoolMe]

Here's the SYSCheck results:
SysCheck HDE v2.4.0 HacksDen Edition by JoostinOnline, Double_A, R2-D2199, and Nano
...runs on IOS58 (rev 6175).

Region: PAL
System Menu 4.3E (v514)
Priiloader installed
Drive date: 07.14.2008
Homebrew Channel 1.1.2 running on IOS58

Hollywood v0x11
Console ID: 90393678
Console Type: Wii
Shop Channel Country: United Kingdom (110)
Boot2 v4
Found 94 titles.
Found 47 IOS on this console. 15 of them are stubs.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 256): Stub
IOS12 (rev 525): No Patches
IOS13 (rev 1031): No Patches
IOS14 (rev 1031): No Patches
IOS15 (rev 1031): No Patches
IOS16 (rev 512): Stub
IOS17 (rev 1031): No Patches
IOS20 (rev 256): Stub
IOS21 (rev 1038): No Patches
IOS22 (rev 1293): No Patches
IOS28 (rev 1806): No Patches
IOS30 (rev 2816): Stub
IOS31 (rev 3608): Trucha Bug, ES Identify, NAND Access
IOS33 (rev 3607): No Patches
IOS34 (rev 3607): No Patches
IOS35 (rev 3607): No Patches
IOS36 (rev 3607): No Patches
IOS37 (rev 5662): No Patches
IOS38 (rev 4123): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3606): No Patches
IOS43 (rev 3606): No Patches
IOS45 (rev 3606): No Patches
IOS46 (rev 3606): No Patches
IOS48 (rev 4123): No Patches
IOS50 (rev 5120): Stub
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5662): No Patches
IOS55 (rev 5662): No Patches
IOS56 (rev 5661): No Patches
IOS57 (rev 5918): No Patches
IOS58 (rev 6175): USB 2.0
IOS60 (rev 6400): Stub
IOS61 (rev 5661): No Patches
IOS70 (rev 6912): Stub
IOS80 (rev 6944): Trucha Bug, NAND Access
IOS222 (rev 65280): Stub
IOS223 (rev 65280): Stub
IOS249[37] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS250[56] (rev 65535, Info: d2x-v10beta52): Trucha Bug, NAND Access, USB 2.0
IOS251[38] (rev 65535, Info: d2x-v10beta52): Trucha Bug, ES Identify, NAND Access
IOS254 (rev 65281): BootMii
BC v6
MIOS v10
Report generated on 05/31/2022.

You should install the cIOS base 57 in the slot 249, do the first step in the guide here.
BTW, do you have "region free everything" "region free WiiWare" etc. In Priiloader? To check, just boot into Priiloader (holding the reset button on boot should load it), and change the settings there. If it doesn't create a "hacks_hash.ini" file on the root of the sdcard, then you might need to get one from the internet or create one yourself.

 

[hayder123]

You should install the cIOS base 57 in the slot 249, do the first step in the guide here.

I did install cIOS base 57 d2x-beta52 in slot 249 a day after I got my wii and installed homebrew channel..

 

[CoolMe]

I did install cIOS base 57 d2x-beta52 in slot 249 a day after I got my wii and installed homebrew channel..

Then how come the syscheck is saying this "IOS249[37] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0"?
..Or you are giving us a old syscheck report (i don't know why you would do that)..

 

[hayder123]

Then how come the syscheck is saying this "IOS249[37] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0"?
..Or you are giving us a old syscheck report (i don't know why you would do that)..

I tried uninstalling the wiiware and vc titles and reinstallng EUROPEAN ones, because as it turns out they were from the USA. Sure enough- they all work. Thanks to everyone for the support

 

[CoolMe]

I tried uninstalling the wiiware and vc titles and reinstallng EUROPEAN ones, because as it turns out they were from the USA. Sure enough- they all work. Thanks to everyone for the support

Just a disclaimer: some, if not the majority of the PAL versions of VC releases run at 50hz ,and not 60hz. So if you want to play VC games at full speed then you should get the NTSC releases instead.
Or if it doesn't matter to you, then just ignore what i just said eh..
For Wiiware releases, both of them (PAL & NTSC) are the same so no worries there.