SX Core, with 10.1.0 on Sys and Emunand with 3.0.5 SXOS SD's are Fat32, sometimes black screens on boot, hold power a while, then stop (it won't start), press power vol+ and hold, then it boots into the menu. Doesn't always work but after a few tries it does.
If running exFat some people say changing SD"s (any SD, just formated) and booting helps to start it again.
If running exFat some people say changing SD"s (any SD, just formated) and booting helps to start it again.
I'm running fat32 also, still having the same issues. Seems to consistently work fine every 2nd boot.
I'm planning on changing to a bigger SD card this week so we'll see if that makes any difference but probably not (the issue occurs with both sys and emunand)
I'm planning on changing to a bigger SD card this week so we'll see if that makes any difference but probably not (the issue occurs with both sys and emunand)
I have 5 SD's one Sys the other 4 Emu, the not starting seems to be random but in general it does work so expanding to different cards shouldn't be more or less of a problem
Having the same issue on my side (exFat), I have to boot twice for booting otherwise I'm stuck after the nintendo logo...
Morevover I have also notice that the titles overlap isn't working anymore...
Morevover I have also notice that the titles overlap isn't working anymore...
I have also something weird, when I'm trying to reboot after removing my sd card I have to try several times (2 in général) but when I'm only switching off and restarting it boots directly... Anyone else make the same observation ?
Seems like it’s causing all kinds of weird things - mine does it on cold boot regardless of whether I remove the SD or not but “restart” from the power menu is always fine
I have this issue as well. The problem appears to be when sysnand is upgraded to 10.2.0 but emunand is a lower version. Sounds like both need to be at 10.2.0 to work with 3.0.5.
Problem is I can't even get into CFW...at all...to update my emunand to 10.2.0. I'm in a catch 22 situation. What I'm doing now is recreating my emunand again, with 10.2.0 sysnand, to see if I can then get into CFW and then I'll just have to restore all my games.
Problem is I can't even get into CFW...at all...to update my emunand to 10.2.0. I'm in a catch 22 situation. What I'm doing now is recreating my emunand again, with 10.2.0 sysnand, to see if I can then get into CFW and then I'll just have to restore all my games.
Seems to be occurring for me regardless of which combination of 10.1 and 10.2 firmware I’m on. Currently on 10.2sys and 10.2 emuNAND.
I’m upgrading SD cards soon so might try making a fresh 10.2 emuNAND from scratch as my existing one was updated from 10.1 using ChoidujourNX
You're having a problem even with 10.2 on both sys/emu? Darn...I was hoping that was the fix. Well, I'm 60% through recreating my emunand so guess I'll find out.
Good news, that’s great to hear you’re in at least. Are you getting consistent cold boots with it or any black screens after the SXOS splash screen?
After being able to get into CFW and restoring games/saves, I booted back into sysnand and downloaded and ran a game I had previously purchased on eshop, then powered off and went back into CFW. So seems ok so far.
Going to restore my other switch to older sysnand (8.0.1) and see if that lets me into my 10.0.2 emunand. If so, then I will update CFW to 10.2, and then restore my 10.2 sysnand and hopefully that takes care of it.
So looks like the problem is that emunand just did not like something that existed in my CFW. I could not get it to boot after attempting to create it multiple times. I had to restore a clean sysnand from before I did any modding, and then create emunand from that. Then it works.
I've finished my install today, dumped NAND and created emuNAND.
When i boot it, i get the nintendo screen immediately, then takes a long time to get to the Switch logo, then it just seems to hang there. I've had it on that screen for 20+ mins but no change. Stock sysnand boots fine though.
My switch is still on 5.1.0 though, should i update to a newer version?
When i boot it, i get the nintendo screen immediately, then takes a long time to get to the Switch logo, then it just seems to hang there. I've had it on that screen for 20+ mins but no change. Stock sysnand boots fine though.
My switch is still on 5.1.0 though, should i update to a newer version?
Similar threads
- No one is chatting at the moment.
-
-
-
-
-
-
-
-
-
-
-
@
Veho:
It's not like they're complaining that their Slurpee is 99% ice or something, but if the cocktail calls for "shot of vodka, shot of vermouth, shot of gin, shot of Campari, three shots of juice, squirt of lemon" and ends up being a thimbleful of booze, that's a problem. -
@
The Real Jdbye:
the funny thing is cocktails in norway are only allowed to have 1 20ml shot of booze -
-
-
-
-
@
The Real Jdbye:
but you could buy as many shots of whisky (or anything else) as you want and ask for a glass of ice and pour them in
-
-
-
@
Veho:
There was a comparison of the number of Ibuprofen poisonings before and after they limited the maximum dosage per box or per pill (i'll look that up). No limit on the number of boxes you can still buy as many as you want, so people argued it was pointless.
-
@
Veho:
But the number of (accidental) poisonings dropped because drinking an entire package of ibuprofen pills went from "I need a new liver" to "I need a new box of Ibuprofen".
-
@
Veho:
Here we have ketoprofen that used to be prescription-only because of the risk of toxic dosages, but then they halved the dose per pill and sell them in bottles of six pills apiece instead of twenty and it doesn't need a prescription any more. Yes you can buy more than one bottle but people simply don't.
-
@
Psionic Roshambo:
Usually accidentally overdose of ibuprofen here is from people taking like cold medicine then ibuprofen for a headache and the combination is over what they need -
-
