Hacking SWITCH NOOB PARADISE - Ask questions here

[brian698]

Thank you so much.
So it means there wont be more updates to the Sigpatches anymore?

 

[kheldar]

Guys what's the default values for this registry key for faster usb connection? Or should I delete it?

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_16C0&PID_27E2&MI_01\6&2ad25e3f&1&0001\Device Parameters]
"DeviceIdleEnabled"=dword:00000001
"DefaultIdleTimeout"=dword:0000EA60
"USBTimeout"=dword:0000EA60

-----


[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbstor\11ECA7E0]
"MaximumTransferLength"=dword:00100000

 

[Hayato213]

Guys what's the default values for this registry key for faster usb connection? Or should I delete it?

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_16C0&PID_27E2&MI_01\6&2ad25e3f&1&0001\Device Parameters]
"DeviceIdleEnabled"=dword:00000001
"DefaultIdleTimeout"=dword:0000EA60
"USBTimeout"=dword:0000EA60

You should leave the registry key alone, it has nothing to do with the usb speed.

 

[kheldar]

You should leave the registry key alone, it has nothing to do with the usb speed.

check: nyx_usb_max_rate__run_only_once_per_windows_pc.reg

 

[Blythe93]

Thank you so much.
So it means there wont be more updates to the Sigpatches anymore?

Sigpatches will probably be updated. sys-patch, though, maybe if someone else decides to pick it up.

 

[Hayato213]

check: nyx_usb_max_rate__run_only_once_per_windows_pc.reg

What ever value the registry file come with leave it as that.

 

[Draxzelex]

I'm using HATS pack and I want to allow sysmmc online so that I can use CFW on it. I also want nintendo servers blocked on Emmc. Does anyone know what file I need to edit to accomplish this?

You can use 90DNS to block Nintendo's servers on emuMMC.

 

[Blakejansen]

You can use 90DNS to block Nintendo's servers on emuMMC.

I understand. That is already done, what I want is to unblock nintendo servers on sysmmc but not on emmc.

 

[Draxzelex]

I understand. That is already done, what I want is to unblock nintendo servers on sysmmc but not on emmc.

90DNS is only applied to whatever system it is running on. Its not automatically applied to both emuMMC and syMMC unless you've manually configured each seperately to have 90DNS.

 

[Blythe93]

I understand. That is already done, what I want is to unblock nintendo servers on sysmmc but not on emmc.

You can use DNS MITM for that. default.txt will block on sysMMC, while emummc.txt will block on emuMMC. For your use case, you can just make emummc.txt. Make sure to read on how to avoid getting banned, depending on what you're about to do.

 

[ShadowbannedAllstar]

Hello everyone. I just got a 512gb SD card and I'm looking to use it to replace my current SD (256gb). I'm not going to even try to migrate the games, I know I'll have to resinstall them. I have some questions about the whole new SD process:

- I literally just took it out of the box, so it hasn't been formatted yet. I know that I need to use fat32 instead of exFat, but what about the other options? Which allocation unit size should I pick, and uh... what programs do I use to format it I have seriously forgotten how I formatted my previous Switch SD card. In my defense, it's been a couple of years, andI have a bad memory

- I was a very clueless newbie when I hacked my Switch for the first time, and as a result I never set up an emunand - I have been using a cfw sysnand the entire time. Is this going to come back to haunt me as I'm trying to setup/use the new SD?

 

[merbiyatch]

it has been years since ive laste been here. great to be back after being stuck on hand held 3ds. im a little late to the party but managed to get myself a new hw modded switch LITE. gone through the hassle of loading up modules and figuring everything for the most part.

i do have a question regarding sysclk and fps locker. i understand some games are locked to 30 andsome at 60(hollow, dead etc.) what i like to do in those games is under clcok their profiles to still be a ble to run at 60 fps.

on highger end games. does fps locker do the same as increasing the value of cpu gpu on sysclk to achieve 60 fps?

on a side note, i also got the switch lite in 16.x.x, in the future if im at a point where i want to update hats, do i need to update the switch ofw as well?

 

[jhharajr]

Can you boot into OFW / stock NAND?
Do you have a spare SD card to test whether it'll work with a fresh install?

yes to both questions.

 

[Yoshi_yogurt]

Do you have a hidden raw partition emunand?

Yes, I have hidden raw partition emunand. Does it matter during the backup if using "on" or "off" on the "SD emuMMC Raw Partition"?

 

[enochlinux]

Is there a way to enter applet mode without holding R and opening a game? I have no games installed as of rn.

Post automatically merged: Mar 15, 2024

Is there a way to enter applet mode without holding R and opening a game? I have no games installed as of rn.

* Non applet.

 

[Hayato213]

Yes, I have hidden raw partition emunand. Does it matter during the backup if using "on" or "off" on the "SD emuMMC Raw Partition"?

If it is off it is backing up sysnand

 

[Blythe93]

yes to both questions.

I'd just start from scratch in that case. If you're using hidden partition emuNAND, it might be enough to just delete the SD card contents and start with a fresh Atmosphere, Hekate, sigpatches, etc. so see if that would work in your case. Backup your SD card contents (you don't need to backup games as you can reinstall them at any time, I suggest that you do it via DBI installer).

Make sure to test your SD card with h2testw before you proceed. Note that the bigger the card, the more time it'll take for the app to test it. If there are no errors, you can use that card. Otherwise, you'll probably need to buy another one unless you want to risk another data corruption.
I've recently replaced my 128GB ADATA with the 256GB Sandisk Extreme microSD card because the first one would every once in a while throw a data corruption error so it was only a matter of time when will I run into it again (it happened about two times before I replaced my microSD card).

I'd suggest that you follow either this or this guide. Additionally, you can grab sigpatches and/or sys-patch module so that you can play game backups.

Before installing mods, I'd suggest that you make a backup of you SD card contents, just in case they corrupt your files again.

 

[enochlinux]

Is there a way to enter applet mode without holding R and opening a game? I have no games installed as of rn.

Post automatically merged: Mar 15, 2024

* Non applet.

Reinstalled MGS1. Worked great. Entered full resource mode. Went great.

Attempted to use goldleaf to both explore content on my PC, then install Animal Crossing off my SD card. Neither worked. I'm about to try DBI, is there literally anything else at all I should try before giving up entirely?

Post automatically merged: Mar 16, 2024

Reinstalled MGS1. Worked great. Entered full resource mode. Went great.

Attempted to use goldleaf to both explore content on my PC, then install Animal Crossing off my SD card. Neither worked. I'm about to try DBI, is there literally anything else at all I should try before giving up entirely?

Continuing to get USB errors.

Literally the only thing I can think to do is pop the SD out, format it, put everything back on, then full factory reset my switch.

 

[Al_Yahud]

Are there any trusted modchip installers in the NYC area?

 

[jhharajr]

I'd just start from scratch in that case. If you're using hidden partition emuNAND, it might be enough to just delete the SD card contents and start with a fresh Atmosphere, Hekate, sigpatches, etc. so see if that would work in your case. Backup your SD card contents

should i keep the emummc folder in the sd or should i delete everything