Homebrew WIP Status Monitor Overlay - Tesla Overlay to monitor your hardware

[masagrator]

Hmmm...Why is that value written in capital letters? It doesn't "align" with other values

Happy now? It doesn't matter anyway, you can write "cEnTeR" and it will still work.

 

[captansam]

Is there anyway to change the buttons to go back to the Tesla Menu when using the Status Monitor Overlay? ie. use the FPS counter & to go back to the Tesla Menu & configure/change it you have to push both joysticks (Left (SL) + right (SR) in at the same time. Can we change the SL +SR combo to something else?

Also wondering if its possible to use the features in status monitor overlay like overclock or FPS counter in other emulators like Retroarch?

 

[masagrator]

Can we change the SL +SR combo to something else?

https://github.com/masagrator/Status-Monitor-Overlay/blob/master/docs/config.md

Also wondering if its possible to use the features in status monitor overlay like overclock or FPS counter in other emulators like Retroarch?

Both: no.

 

[jelbo]

For some reason my Switch locks up when invoking Status-Monitor-Overlay. Sometimes it works a little but then my Switch locks up.

I'm using Status Monitor 1.0.3a, Ultrahand 1.5.8, HOS 18.0.1, AMS 1.7.0 and latest nx-ovlloader, SaltyNX, FPSLocker, sys-clk-oc8_0512 and OC Switchcraft 1.2.4. Is it supposed to work with the stuff I'm running?

 

[masagrator]

For some reason my Switch locks up when invoking Status-Monitor-Overlay. Sometimes it works a little but then my Switch locks up.

I'm using Status Monitor 1.0.3a, Ultrahand 1.5.8, HOS 18.0.1, AMS 1.7.0 and latest nx-ovlloader, SaltyNX, FPSLocker, sys-clk-oc8_0512 and OC Switchcraft 1.2.4. Is it supposed to work with the stuff I'm running?

Does this happen with Wi-fi turned off?

 

[jelbo]

Does this happen with Wi-fi turned off?

With WiFi turned on. I managed to load the overlay GUI a few times, but my last few attempts didn't load anything and my Switch locks up pretty quickly.

 

[masagrator]

Then check if this happens with wifi turned off.

 

[jelbo]

Then check if this happens with wifi turned off.

It worked for a while, but when triggering the overlay off it caused a crash again. I think it could be related to the fact (?) that both Ultrahand and Status Monitor Overlay use L + Down + Right Joystick Click to trigger.

 

[masagrator]

If it's happening when trying to close overlay, it may be because you have too much sysmodules installed. When going back to main menu is when it takes the most RAM. Try to delete some sysmodules and restart system.

 

[jelbo]

I managed to fix it by changing the key combo in the config file to key_combo=LSTICK+RSTICK. Before I wasn't using a config file at all. Thanks for your help, still!

/edit: question about the possible things to show on the overlay. In a video I saw someone display PWR draw and battery info in the Micro display. The readme doesn't list this as options for the config files. How did he/she do that?
/edit2: It is hanai3Bi's fork.

 

[masagrator]

1.0.4 is now released.

• Moved from c++20 to c++23
• With SaltyNX 0.8.0+ FPS Graph mode will adjust height according to received back display refresh rate.

 

[masagrator]

1.1.0 is now released

Added "Game Resolutions" menu to "Other" category.

SaltyNX 0.9.0+ is required for it to work properly

 

[masagrator]

1.1.1 is now released

• Added options to show 2 the best candidates for game's internal resolution in Mini and Full modes.
• Added keys to config that can disable showing FPS and Resolutions in Full mode
• Added value "RES" to "show" key in Mini mode that shows Resolutions.

Update SaltyNX to 0.9.1+ for better compatibility with games using Id Tech engines

 

[Keriam]

Hello everyone, I reinstalled all my overlays after upgrading HOS + Atmosphere and I discovered that Status Overlay is working well with Airplay Mode on but is stuck at 254 with Airplane off

Can someone explain me why ? I already had this issue in the past but cannot remember what was the root cause.

Not a big deal but I would like to use Cloud save for the Witcher 3 when I switch to my Steam Deck Oled

 

[nitrozz]

not show FAN %

 

[masagrator]

not show FAN %

Delete config file to bring back original settings

 

[Darktalon]

howdy! i updated to salty nx 0.9.2, and status monitor overlay 1.1.3. unfortunately, the estimated remaining battery time now just says (0:00) all the time (all the other things work though). anyone have any hints or ideas what I can do to fix this?

Post automatically merged: Sep 20, 2024

howdy! i updated to salty nx 0.9.2, and status monitor overlay 1.1.3. unfortunately, the estimated remaining battery time now just says (0:00) all the time (all the other things work though). anyone have any hints or ideas what I can do to fix this?

interesting development, i ran Battery Desync Fix NX and the remaining time has returned.