Hacking Hardware Picofly - a HWFLY switch modchip

[Dee87]

I mean it is touching yeah, but it is soldered at 4 points pushing against thre soldering ball... where the hell can it go, move or... fly?

sure it touching , like i said then dont solder to the board anymore just use wire and glue its the same

 

[jkyoho]

It wasn't touching the Dat1x, as close as it looks, but even so, I redid the solder point. I am sending another image to verify. I'm going to put here the multimeter values for each point.

1 Dat1: 524 ohms
2 Dat0: 524 ohms
3 Groud
4 Clk: 917 ohms
5 Vdd :780 ohms
6 CMD: 524 ohms
7 Dat3: 524 ohms
8 Dat2: 526 ohms

Just now, it worked, then it gave this error screen on the micro sd.

I also saw the amount of SDMMC1 errors.

Never seen such error.
This is what I googled
https://github.com/Atmosphere-NX/Atmosphere/issues/1914
and this
https://gbatemp.net/threads/error-010041544d530000-when-booting-atmosphere-cfw.590522/

 

[nico77]

can someone help me

Spoiler: 90dns

so i manage to install 90dns.
when i run it, almost entire nin***do site almost got "blocked!"
but i got only
2 site with "unresolved" :

nin***do.net
nin**doswit*h.cn


what unresolved mean ?
is there a way to fix this unresolved into blocked ! ??

tasukette
sankyu

 

[jkyoho]

can someone help me

Spoiler: 90dns

so i manage to install 90dns.
when i run it, almost entire nin***do site almost got "blocked!"
but i got only
2 site with "unresolved" :

nin***do.net
nin**doswit*h.cn


what unresolved mean ?
is there a way to fix this unresolved into blocked ! ??

tasukette
sankyu

show your default.txt/emmc.txt contents from /Atmosphere/hosts

 

[nico77]

show your default.txt/emmc.txt contents from /Atmosphere/hosts

ok
but im still charging my switch
ill screenshot after this

 

[seraser2]

Does your switch shows the nintendo logo ? is there a black screen after nintendo logo? if it is then you need to dump the keys and rebiuld it, but follow the Sthetix guide for level 1 bricking. If level 1 don't work to higher level, but in a squence.

Edit: my switch also has the similar issue where it shows the nintendo logo and then black screen and don't boot. I install the picofly and follow the sthetix guide for level 1 unbricking. I got lucky that level 1 guide fixes my switch.

No, black screen , 130mah to 110mah and finally stuck at 90mah, second stage of boot dont run, so I dont know if install pinofly can solve this.

 

[nico77]

show your default.txt/emmc.txt contents from /Atmosphere/hosts

i think it only show something like this

127.0.0.1 receive-%.dg.srv.nintendo.net receive-%.er.srv.nintendo.net

??

 

[abal1000x]

.

 

[jkyoho]

i think it only show something like this

127.0.0.1 receive-%.dg.srv.nintendo.net receive-%.er.srv.nintendo.net

??

TRY my recipe

# Nintendo Telemetry Servers
127.0.0.1 receive-%.dg.srv.nintendo.net receive-%.er.srv.nintendo.net

# Block Nintendo Servers
127.0.0.1 *nintendo.*
127.0.0.1 *nintendo-europe.com
127.0.0.1 *nintendoswitch.*
95.216.149.205 *conntest.nintendowifi.net
95.216.149.205 *ctest.cdn.nintendo.net

 

[POPOLO]

The phenomenon that occurs during MOSFET welding.
1.2 The D cable and S cable are too thin or Non-Wetting
3.PASS

 

[s4n0suk3]

Hi I will do a switch oled now, I can use a cutter for the clk point? I don't had a Dremmel right now

 

[NooBziN]

OLED

 

[abal1000x]

.

 

[BlueBeans]

OLED

what size wire are you using?

 

[NooBziN]

what size wire are you using?

AWG 34

 

[BlueBeans]

AWG 34

where did you find that. just checked amazon and they dont have any.

 

[nico77]

TRY my recipe

# Nintendo Telemetry Servers
127.0.0.1 receive-%.dg.srv.nintendo.net receive-%.er.srv.nintendo.net

# Block Nintendo Servers
127.0.0.1 *nintendo.*
127.0.0.1 *nintendo-europe.com
127.0.0.1 *nintendoswitch.*
95.216.149.205 *conntest.nintendowifi.net
95.216.149.205 *ctest.cdn.nintendo.net

thx
it works

im also adding more, idk is it effect or not
but

Spoiler

# 90DNS-equivalent
127.0.0.1 *nintendo.com
127.0.0.1 *nintendo.net
127.0.0.1 *nintendo.jp
127.0.0.1 *nintendo.co.jp
127.0.0.1 *nintendo.co.uk
127.0.0.1 *nintendo-europe.com
127.0.0.1 *nintendowifi.net
127.0.0.1 *nintendo.es
127.0.0.1 *nintendo.co.kr
127.0.0.1 *nintendo.tw
127.0.0.1 *nintendo.com.hk
127.0.0.1 *nintendo.com.au
127.0.0.1 *nintendo.co.nz
127.0.0.1 *nintendo.at
127.0.0.1 *nintendo.be
127.0.0.1 *nintendods.cz
127.0.0.1 *nintendo.dk
127.0.0.1 *nintendo.de
127.0.0.1 *nintendo.fi
127.0.0.1 *nintendo.fr
127.0.0.1 *nintendo.gr
127.0.0.1 *nintendo.hu
127.0.0.1 *nintendo.it
127.0.0.1 *nintendo.nl
127.0.0.1 *nintendo.no
127.0.0.1 *nintendo.pt
127.0.0.1 *nintendo.ru
127.0.0.1 *nintendo.co.za
127.0.0.1 *nintendo.se
127.0.0.1 *nintendo.ch
127.0.0.1 *nintendo.pl
127.0.0.1 *nintendoswitch.com
127.0.0.1 *nintendoswitch.com.cn
127.0.0.1 *nintendoswitch.cn
95.216.149.205 *conntest.nintendowifi.net
95.216.149.205 *ctest.cdn.nintendo.net


i got this from searching random
but i think this one from mitm
this one using emummc.txt
https://nh-server.github.io/switch-guide/extras/blocking_nintendo/

but i copied and adding to default.txt

also i compare from this

now all blocked
thx for help

btw how to make sure that im pretty blocked and not connected to site ?
im also using exosphere

kinda scary if it connect and ban me hehehhehe

 

[abal1000x]

.

 

[nico77]

my ninja way is never goes online in cfw mode.

you mean dont connect to shop~shop ?

yes i havent

 

[Asadayo]

Updated from 2.73 to 2.74.
The led blinks *=* and the switch does not work.
NAND is Toshiba THGAMSG9T24BAIL and uses awg32.
Reinstalled by flashing the RP2040 to 2.73 and it worked fine.
How can I use 2.74?