1. Hayato213

    Hayato213 GBAtemp Guru
    Member

    Joined:
    Dec 26, 2015
    Messages:
    6,716
    Country:
    United States
    You can asks @mattytrog and see if he has any more Trinket M0 left in stock.
     
    mattytrog likes this.
  2. edwardsalazar97

    Newcomer

    Joined:
    Jul 11, 2019
    Messages:
    44
    Country:
    Colombia
    It refers to the repair of your switch because you had a problem with the joycon strap, just imagine if he can help you
     
    mattytrog likes this.
  3. Hayato213

    Hayato213 GBAtemp Guru
    Member

    Joined:
    Dec 26, 2015
    Messages:
    6,716
    Country:
    United States
    lol I didn't read the earlier posts.
     
  4. jadelaroche

    jadelaroche Newbie
    Newcomer

    Joined:
    Feb 19, 2019
    Messages:
    5
    Country:
    Russia
    Thanks for the guide
     
  5. mattytrog

    OP mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,622
    Country:
    United Kingdom
    Yep still got Trinket in. I seem to be finding them everywhere in my parts bins.
     
  6. Hofure

    Hofure Newbie
    Newcomer

    Joined:
    Oct 25, 2019
    Messages:
    9
    Country:
    United Kingdom
    How much would you charge to install the trinket @mattytrog ?
     
  7. mattytrog

    OP mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,622
    Country:
    United Kingdom
    Send me a pm mate :) not much.
     
  8. remanifest

    remanifest Newbie
    Newcomer

    Joined:
    Nov 1, 2019
    Messages:
    6
    Country:
    United States
    I'm brand new here, but would be willing to pay for someone to perform this mod for me in the USA. I don't have any faith in my abilities to solder items that small. I can remove the USB port before shipping the trinket + switch to you.

    Obviously you'll need to have some rep on this board before I'd be willing to send my stuff to you...
     
  9. mattytrog

    OP mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,622
    Country:
    United Kingdom
    That counts me out then :rofl2:
     
    DfknG likes this.
  10. remanifest

    remanifest Newbie
    Newcomer

    Joined:
    Nov 1, 2019
    Messages:
    6
    Country:
    United States
    lol I was going to ask you @mattytrog, but was worried about overseas shipping times
     
  11. FunThomas

    FunThomas GBAtemp Advanced Fan
    Member

    Joined:
    Jan 10, 2016
    Messages:
    610
    Country:
    Gambia, The
    Hi @mattytrog,
    i want to get back to dual boot with my trinket M0. I have flashed the latest files taken from:
    https://gbatemp.net/threads/trinket-rebug-others-switchboot_uf2-fusee_uf2-modchip-software.526607/

    for Trinket M0 with Part1 Dual Boot and Part 2 for Switchboot UF2

    starting the samd21 Update mode with the Payload from first post
    Put Part1 Dual Boot on USB Drive and after the usb drive gets reconnected i put part2 switchboot uf2 on it and then 12sec power -> off
    and after a power on only with power i get into your hekate :-(
    it seems there is still the perma_cfw, i have done this flashing 3 times and always boots to cfw directly

    do you have any advice ?
     
  12. mattytrog

    OP mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,622
    Country:
    United Kingdom
    Hmmm... Check in about in the switchboot menu. See what your straps say. See whats present.

    Other than that, is autoRCM enabled? Double-check!
     
    FunThomas likes this.
  13. FunThomas

    FunThomas GBAtemp Advanced Fan
    Member

    Joined:
    Jan 10, 2016
    Messages:
    610
    Country:
    Gambia, The
    Thx for the fast reply, i had AutoRCM not in mind ;-)

    — Posts automatically merged - Please don't double post! —

    @mattytrog is there any way to get to switch recovery mode with the trinket m0 installed ?
     
    mattytrog likes this.
  14. mattytrog

    OP mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,622
    Country:
    United Kingdom
    ofcourse.

    Press PWR to boot normally... Wait a second or so...
    Hold down both vol buttons...
    Keep holding... Eventually, you will enter recovery mode.
     
    FunThomas likes this.
  15. FunThomas

    FunThomas GBAtemp Advanced Fan
    Member

    Joined:
    Jan 10, 2016
    Messages:
    610
    Country:
    Gambia, The
    i thought it would not work because its too late but it works!
    big thanx !
     
    Last edited: Nov 5, 2019
  16. FXDX

    FXDX GBAtemp Regular
    Member

    Joined:
    Sep 15, 2019
    Messages:
    141
    Country:
    Dominican Republic
    Hello guys.
    My first Trinket M0 + Xecuter SX OS file installation. Everything goes perfectly. I have attached below a RAR archive with everything you need for those who want to use TX payload.
    Pin 3 goes to RCM_STRAP or pin 10 on the right jaycon rail. (Only for those who have the SX license and do not have an SX PRO (dongle) or SX Gear version) !!!

    IMG_E6701.JPG IMG_6702.PNG
     

    Attached Files:

    Last edited: Nov 5, 2019
  17. Joseph111

    Joseph111 Member
    Newcomer

    Joined:
    Oct 9, 2019
    Messages:
    36
    Country:
    United Kingdom
    You've left the Micro USB still attached to the trinket. Does that still work fine for you? Also, I can't seem to USB install stuff since it keeps saying device is not recognised, so I can't actually use stuff like NXMTP to explore my Switch content
     
    FXDX likes this.
  18. FXDX

    FXDX GBAtemp Regular
    Member

    Joined:
    Sep 15, 2019
    Messages:
    141
    Country:
    Dominican Republic
    Yes, it works without a problem, but today i removed it the Micro USB, so that i can mount the back cover again. Also, i have restored the wires routes more aesthetically.
    trink 1.jpg trink 3.jpg
     
    Last edited: Nov 6, 2019
  19. Joseph111

    Joseph111 Member
    Newcomer

    Joined:
    Oct 9, 2019
    Messages:
    36
    Country:
    United Kingdom
    Ah interesting. Are you able to USB install stuff just fine by the way? My trinket works fine, just can't actually usb install stuff. As for updating the trinket, when I get home Matty told me what to do so I will try it.
     
    FXDX likes this.
  20. FXDX

    FXDX GBAtemp Regular
    Member

    Joined:
    Sep 15, 2019
    Messages:
    141
    Country:
    Dominican Republic
    Okay, wait, you tell us what you did.:switch:
     
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - ItsyBitsy, Internal, (Trinket