Tutorial [HOW-TO] Have a homemade Streetpass Relay

[duke_srg]

When I do do the connection test, the 3DS connects to the AP, but the AP doesn't connect to the internet. What to do?

Have you checked that win the Nintendo Zone app? Check the Internect Connection Sharing is properly set by the script, and make sure connection is not restarting if you're using BASE256 with the default delay. You can't remove the encryption in windows.

Harsky any windows 7 compatible wireless adapter will work, not only USB. But Atheros and Intel based should have a problems. Anyway don't run to the shop right now untill recently released firmware 9.3 changes is investigated

 

[Scrub Lord]

Have you checked that win the Nintendo Zone app? Check the Internect Connection Sharing is properly set by the script, and make sure connection is not restarting if you're using BASE256 with the default delay.

My wired connection is set to share yes, did check Nintendo Zone app too. I'm currently trying to do it with base16, not having any luck though

 

[Scrub Lord]

I'll wait for a few minutes ^^

 

[duke_srg]

I'll wait for a few minutes ^^

Check the nzone.macs content, if you did not run with the reload options, it may contain the rest of the BASE256 addresses.

 

[kaduvrp]

duke_srg I didn't understand what was the first thing you needed, but here's the second output!

AdapterType DeviceID MACAddress Name
NetworkAddresses ServiceName Speed
0 WAN Miniport (SSTP)
RasSstp
1 WAN Miniport (IKEv2)
RasAgileVpn
2 WAN Miniport (L2TP)
Rasl2tp
3 WAN Miniport (PPTP)
PptpMiniport
4 WAN Miniport (PPPOE)
RasPppoe
5 WAN Miniport (IPv6)
NdisWan
6 WAN Miniport (Network Monitor)
NdisWan
Ethernet 802.3 7 48:5B:39:AF:99:B3 NVIDIA nForce 10/100 Mbps Ethernet
NVNET 100000000
8 WAN Miniport (IP)
NdisWan
9 Apple Mobile Device Ethernet

10 RAS Async Adapter

Tunnel 11 Teredo Tunneling Pseudo-Interface
tunnel 100000
12 Gigaset USB Adapter 108

Tunnel 13 Adaptador do Microsoft ISATAP #2
tunnel 100000
Tunnel 14 Adaptador do Microsoft 6to4
tunnel 100000
Tunnel 15 Adaptador do Microsoft ISATAP
tunnel 100000
16 TP-LINK Wireless USB Adapter

17 Microsoft Virtual WiFi Miniport Ada
pter
Tunnel 18 Adaptador do Microsoft ISATAP
tunnel
19 Apple Mobile Device Ethernet

Ethernet 802.3 20 44:94:FC:0F:79:2E NETGEAR WNA1100 N150 Wireless USB A
dapter athur 9223372036854775807
21 Microsoft Virtual WiFi Miniport Ada
pter

 

[Scrub Lord]

Check the nzone.macs content, if you did not run with the reload options, it may contain the rest of the BASE256 addresses.

hmmm how can I do this?
I always run nzone.vbs reload before starting it

 

[duke_srg]

kaduvrp I asked for the output from maccheck.cmd, the first string contain hardware and driver information. Is this output from the one which gives BSOD? Looks like so because of the Atheros drivers used. I'm afraid this can't be fixed for now.

Scrub Lord if so, the only option is to wait, but Nintendo Zone app just must be able to load a page. If not, just try once again to stop nzone.vbs and manually configure the AP with
netsh wlan set hostednetwork allow ...
netsh wlan start hostednetwork
and then enable ICS.
That is exactly performed by the script.

 

[kaduvrp]

kaduvrp I asked for the output from maccheck.cmd, the first string contain hardware and driver information. Is this output from the one which gives BSOD? Looks like so because of the Atheros drivers used. I'm afraid this can't be fixed for now.

Scrub Lord if so, the only option is to wait, but Nintendo Zone app just must be able to load a page. If not, just try once again to stop nzone.vbs and manually configure the AP with
netsh wlan set hostednetwork allow ...
netsh wlan start hostednetwork
and then enable ICS.
That is exactly performed by the script.

Netgear Inc.,NETGEAR WNA1100 N150 Wireless USB Adapter,USB\VID_0846&PID_9030
\12345,athur
0000000000000000
BDD1Número inválido. As constantes numéricas são decimais (17),
hexadecimais (0x11) ou octais (021).
BDD1

 

[duke_srg]

Netgear Inc.,NETGEAR WNA1100 N150 Wireless USB Adapter,USB\VID_0846&PID_9030
\12345,athur
0000000000000000
BDD1Número inválido. As constantes numéricas são decimais (17),
hexadecimais (0x11) ou octais (021).
BDD1

Yes, this in is not compatible with MAC spoofing at all.

 

[kaduvrp]

Yes, this in is not compatible with MAC spoofing at all.

The worst part is that my router is compatible with DD-WRT. But that LAMEASS technician screwed it by making a bridge connection out of my poor router =/

Well, I'll cut my losses and return this wifi-card. 80 bucks is too much money.

 

[kaduvrp]

Yes, this in is not compatible with MAC spoofing at all.

Well, I was able to revive my internet connection, but I'm facing this error on my DD-WRT router

/bin/sh: eval: line 1: /tmp/nzone.sh: not found

 

[duke_srg]

Well, I was able to revive my internet connection, but I'm facing this error on my DD-WRT router

/bin/sh: eval: line 1: /tmp/nzone.sh: not found

That is because in bridged configuration DNS server setting is not necessary, but it is needed for the script to work. The script just was not downloaded because the router itself can't resolve the hostname.

 

[kaduvrp]

That is because in bridged configuration DNS server setting is not necessary, but it is needed for the script to work. The script just was not downloaded because the router itself can't resolve the hostname.

So, what can I do? I'm trying the "basic" method, which is changing the ssid name to NZ@McD1 then changing the MAC Address to 4E:53:50:4F:4F:46 and I GOT MY FIRST TAG <3

 

[duke_srg]

So, what can I do? I'm trying the "basic" method, which is changing the ssid name to NZ@McD1 then changing the MAC Address to 4E:53:50:4F:4F:46 and I GOT MY FIRST TAG <3

With NZ@McD1 you can get a streetpass without changing MAC. For the script you should referer to the DDWRT documentation on how to use resolv.conf file, that may force your router to use DNS even in brige mode.

 

[kaduvrp]

With NZ@McD1 you can get a streetpass without changing MAC. For the script you should referer to the DDWRT documentation on how to use resolv.conf file, that may force your router to use DNS even in brige mode.

Can I use a password on my network? I'm not willing to leave it open.

 

[duke_srg]

Can I use a password on my network? I'm not willing to leave it open.

Yes, you can, but in that case you are only limited with the BASExx MAC lists. Alternatively you can enable MAC filter on a router.

 

[Scrub Lord]

When I try loading the Nintendo Zone app on my 3DS, I get an Error Code: 003-1105. Is this supposed to happen?

 

[Marco RamLey]

When I try loading the Nintendo Zone app on my 3DS, I get an Error Code: 003-1105. Is this supposed to happen?

Hi! Yes, I think that's supposed to happen.

 

[Marco RamLey]

Hi!
I updated my 3ds to the 9.3 firmware and now I can't get any streetpass with the homepass. Can anyone please be so kind of providing any help about this?

Thanks in advance.

 

[Koldur]

Hi!
I updated my 3ds to the 9.3 firmware and now I can't get any streetpass with the homepass. Can anyone please be so kind of providing any help about this?

Thanks in advance.

If you tried to back track just a few messages, you could find the answer (hint, I wrote what the problem is)