thanks for checking this out for me
It is a 32 GB model that I bought on launch day of the wiiu
So from what I understand it might be a hardware issue not just some file corruption
Do you haves guides on what the steps I should do next because I have no idea how to do the hard mod ou are talking about and really not comfortable on doing soldering
You would need to open up your Wii U (take care to not rip the Disc Drive cable) and solder thin wires to these vias: https://wiiubrew.org/wiki/File:EMMC_pinout_WiiU.jpg. You also need to cut the CLK trace between the two pads and solder a wire to each of the pads.
That's the hardest part. Then you either need a compatible card reader and a Micro SD to SD adapter to sacrifice. You would open the card adapter and solder the other end of the wires to it (using the CLK on the eMMC side). Then we can use that to dump the eMMC to the PC. The PC will see it as an sdcard. I like to use a raspberry pi instead of a card reader as it gives more control than a USB card reader.
Then you would remove the card adapter / raspberry pi and instead solder another micro SD to SD adapter to the Wires, but this time to the pins on the outside of the adapter and using the clk signal comming from the SoC. This will then act as an micro sd slot, where you can then put a 32gb micro sd with the written back and fixed image of the eMMC.
But the vias are quite small. You need to be careful to not damage them by heating to long. Use enough flux and don't heat them for to long. After soldering I would recommend to use hot glue or something like that for stress relief, so that you don't accidentally rip them out. I also used magnet wire, because it bends easily and therefore doesn't put much stress on the solder joins.
Maybe practice on something else first.
Also did you see what I added to my last post?
Post automatically merged:
MEDIA ERROR, 32GB, launch day, hynix. Yeah you have won the bad eMMC bingo.
I do not have a rasberry pie
I think this stuff is out of my league
I will need to do much reading and watch many tutorial and test before give that a try
I think its too risky for a newbie like me
It is a shame that it broke like this, and I really take care of my consoles
thank you for your help
I mean it's already broken and micro soldering is a useful skill to have. And you never know if you can't do it before you try.
Using an old PCB you no longer need to practice a few times before is still recommended. The hardest thing is, soldering these 6 wires. Everything after that is pretty easy. We can guide you through it.
Tin the end of the magnet wire (takes a moment to burn of the isolation), put flux on the via, tin the via and then hold the wire to via and just heat it up for 1-2 seconds. There is no magic, only flux.
I just gona give you some advice,give it to someone who has soldering skills,atm its fixable,but if you never soldered,don't try it.
You just gona kill the system to unrepairable,its not a bit soldering,for this you need skills,simpy as that.
If you wanna try soldering,buy a broken pcb from some electronic device,but not try to repair a console that is fixable.
Maybe TheCod3r,he's on youtube,or voultar or some decent repair shop,but on y6our comments you writed here,you have not the skills.
Just ask what the costs are,you have to decide cause it will cost some money,much work and difficult.
So I've got an issue where my wii u freezes soon after booting. I can sometimes make it to the settings and can consistantly get to user selection. I was going to switch from using haxchi to tiramisu but couldn't get the browser to load (106-2203). I assume that's nand corruption? I was able to dump the nand and pull the logs before the freezing started. Kinda just lost at what to do now?
Also I've been reading and it looks like I need to dump the MLC too? I've pissed around with the wii u enough and got far enough to load up nand dumper again and I'm currently doing a new dump with the MLC.
If you edit, I don't get a notification, so I will miss it. Also if you double post, I won't get a notification for the second post because of the auto merge.
You have MEDIA ERRORs on mlc01 -> failing eMMC.
If you are using the standard nand dumper included in Tiramisu, then you need to be carefull and immidetly remove power, when it finishes, so the wii u doesn't boot again and write.
I'm just using the wii u nand dumper from the homebrew app store. I never had CBHC or tiramisu installed, I just have been using the manual haxchi start for sigpatches. If any of that matters.
After a couple days of Nintendo releasing their 18.0.0 firmware update, @SciresM releases a brand new update to his Atmosphere NX custom firmware for the Nintendo...
Today, April 8th, 2024, at 4PM PT, marks the day in which Nintendo permanently ends support for both the 3DS and the Wii U online services, which include co-op play...
Hello, GBAtemp members! After a prolonged absence, I am delighted to announce my return and upgraded form to you today...
Introducing tempBOT AI 🤖
As the embodiment...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
The highly popular and accurate FPGA hardware, MisterFGPA, has received today a brand new update with a long-awaited feature, or rather, a new core for hardcore...
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
The romhacking community is always a source for new ways to play retro games, from completely new levels or stages, characters, quality of life improvements, to flat...
Quite a bit of news have unfolded in the past couple of days in regards to the Sonic franchise, for both its small and big screens outings.
To start off, the...
This Thursday, Microsoft will be fulfilling one of its key promises from when it acquired Activision-Blizzard by bringing Diablo IV to Game Pass. It looks like it'll...
Today, April 8th, 2024, at 4PM PT, marks the day in which Nintendo permanently ends support for both the 3DS and the Wii U online services, which include co-op play...
Hello, GBAtemp members! After a prolonged absence, I am delighted to announce my return and upgraded form to you today...
Introducing tempBOT AI 🤖
As the embodiment...
Nintendo might just as well be a law firm more than a videogame company at this point in time, since they have yet again issued their now almost trademarked usual...
After a couple days of Nintendo releasing their 18.0.0 firmware update, @SciresM releases a brand new update to his Atmosphere NX custom firmware for the Nintendo...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
Two classic titles join the Nintendo Switch Online Expansion Pack game lineup. Available starting April 24th will be the motorcycle racing game Extreme G and another...
The highly popular and accurate FPGA hardware, MisterFGPA, has received today a brand new update with a long-awaited feature, or rather, a new core for hardcore...
Nintendo has recently announced through their social media accounts that a new Indie World stream will be airing tomorrow, scheduled for April 17th, 2024 at 7 a.m. PT...