thanks for checking this out for me
It is a 32 GB model that I bought on launch day of the wiiu
So from what I understand it might be a hardware issue not just some file corruption
Do you haves guides on what the steps I should do next because I have no idea how to do the hard mod ou are talking about and really not comfortable on doing soldering
You would need to open up your Wii U (take care to not rip the Disc Drive cable) and solder thin wires to these vias: https://wiiubrew.org/wiki/File:EMMC_pinout_WiiU.jpg. You also need to cut the CLK trace between the two pads and solder a wire to each of the pads.
That's the hardest part. Then you either need a compatible card reader and a Micro SD to SD adapter to sacrifice. You would open the card adapter and solder the other end of the wires to it (using the CLK on the eMMC side). Then we can use that to dump the eMMC to the PC. The PC will see it as an sdcard. I like to use a raspberry pi instead of a card reader as it gives more control than a USB card reader.
Then you would remove the card adapter / raspberry pi and instead solder another micro SD to SD adapter to the Wires, but this time to the pins on the outside of the adapter and using the clk signal comming from the SoC. This will then act as an micro sd slot, where you can then put a 32gb micro sd with the written back and fixed image of the eMMC.
But the vias are quite small. You need to be careful to not damage them by heating to long. Use enough flux and don't heat them for to long. After soldering I would recommend to use hot glue or something like that for stress relief, so that you don't accidentally rip them out. I also used magnet wire, because it bends easily and therefore doesn't put much stress on the solder joins.
Maybe practice on something else first.
Also did you see what I added to my last post?
Post automatically merged:
MEDIA ERROR, 32GB, launch day, hynix. Yeah you have won the bad eMMC bingo.
I do not have a rasberry pie
I think this stuff is out of my league
I will need to do much reading and watch many tutorial and test before give that a try
I think its too risky for a newbie like me
It is a shame that it broke like this, and I really take care of my consoles
thank you for your help
I mean it's already broken and micro soldering is a useful skill to have. And you never know if you can't do it before you try.
Using an old PCB you no longer need to practice a few times before is still recommended. The hardest thing is, soldering these 6 wires. Everything after that is pretty easy. We can guide you through it.
Tin the end of the magnet wire (takes a moment to burn of the isolation), put flux on the via, tin the via and then hold the wire to via and just heat it up for 1-2 seconds. There is no magic, only flux.
I just gona give you some advice,give it to someone who has soldering skills,atm its fixable,but if you never soldered,don't try it.
You just gona kill the system to unrepairable,its not a bit soldering,for this you need skills,simpy as that.
If you wanna try soldering,buy a broken pcb from some electronic device,but not try to repair a console that is fixable.
Maybe TheCod3r,he's on youtube,or voultar or some decent repair shop,but on y6our comments you writed here,you have not the skills.
Just ask what the costs are,you have to decide cause it will cost some money,much work and difficult.
So I've got an issue where my wii u freezes soon after booting. I can sometimes make it to the settings and can consistantly get to user selection. I was going to switch from using haxchi to tiramisu but couldn't get the browser to load (106-2203). I assume that's nand corruption? I was able to dump the nand and pull the logs before the freezing started. Kinda just lost at what to do now?
Also I've been reading and it looks like I need to dump the MLC too? I've pissed around with the wii u enough and got far enough to load up nand dumper again and I'm currently doing a new dump with the MLC.
If you edit, I don't get a notification, so I will miss it. Also if you double post, I won't get a notification for the second post because of the auto merge.
You have MEDIA ERRORs on mlc01 -> failing eMMC.
If you are using the standard nand dumper included in Tiramisu, then you need to be carefull and immidetly remove power, when it finishes, so the wii u doesn't boot again and write.
I'm just using the wii u nand dumper from the homebrew app store. I never had CBHC or tiramisu installed, I just have been using the manual haxchi start for sigpatches. If any of that matters.
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
TheFlow has done it again--a new kernel exploit has been released for PlayStation 4 consoles. This latest exploit is called PPPwn, and works on PlayStation 4 systems...
Nintendo might just as well be a law firm more than a videogame company at this point in time, since they have yet again issued their now almost trademarked usual...
While rumors had been floating about rampantly as to the future plans of Nintendo, the President of the company, Shuntaro Furukawa, made a brief statement confirming...
Another video game prototype has been found and preserved, and this time, it's none other than the game that spawned an entire franchise beloved by many, the very...
Anbernic is back with yet another retro handheld device. The upcoming RG28XX is another console sporting the quad-core H700 chip of the company's recent RG35XX 2024...
Two classic titles join the Nintendo Switch Online Expansion Pack game lineup. Available starting April 24th will be the motorcycle racing game Extreme G and another...
Nintendo has officially announced that a successor to the beloved Switch console is on the horizon. As we eagerly anticipate what innovations this new device will...
Nintendo has officially announced that a successor to the beloved Switch console is on the horizon. As we eagerly anticipate what innovations this new device will...
While rumors had been floating about rampantly as to the future plans of Nintendo, the President of the company, Shuntaro Furukawa, made a brief statement confirming...
Nintendo might just as well be a law firm more than a videogame company at this point in time, since they have yet again issued their now almost trademarked usual...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
TheFlow has done it again--a new kernel exploit has been released for PlayStation 4 consoles. This latest exploit is called PPPwn, and works on PlayStation 4 systems...
After rumour got out about an upcoming NES Edition release for the famed Nintendo World Championships, Nintendo has officially unveiled the new game, titled "Nintendo...
DOOM is well-known for being ported to basically every device with some kind of input, and that list now includes the old retro game console in Persona 5 Royal...
The number of layoffs and cuts in the videogame industry sadly continue to grow, with the latest huge layoffs coming from Microsoft, due to what MIcrosoft calls a...