Hacking 3DS NOOB PARADISE - Ask questions here

  • Thread starter Cyan
  • Start date
  • Views 4,499,382
  • Replies 53,792
  • Likes 43
N

NoGamer

Guest
Well when I got this sd card it was already configured to run rxtools. So all I did was backup emunand inside rxtools then extracted it out using the emunand tool and now I got this new sd card and I got no idea what to do with jt.

How to move Games, Saves, Themes, and Emunand to a new SD card
  1. Get 3DS Multi EmuNAND Creator
  2. Insert your old SD card in your PC
  3. Open 3DS Multi EmuNAND Creator with Administrator privileges and select "Extract NAND"
  4. Save the EmuNAND backup somewhere on your PC (as [EmuNAND firmware version] emunand.bin if you want)
  5. Wait for the "Operation successfully completed!" message to pop up, then click OK. You now have your EmuNAND backup from your old SD card.
  6. Backup all your SD card files to your PC
  7. Close 3DS Multi EmuNAND Creator and eject your old SD card
  8. Insert your new SD card in your PC
  9. Open 3DS Multi EmuNAND Creator again
  10. Under the Format EmuNAND section, make sure that your new SD card is selected, then click "Start Format"
  11. Select the emunand bin file you made in step 4 and click Open
  12. Click Yes at the warning to start the process
  13. Wait for the green bar to reach the end and the "Operation successfully completed!" message to pop up, then press OK
  14. Close 3DS Multi EmuNAND Creator
  15. Put the SD card files from your old sd card backup (from step 5) on your new SD card
  16. Done, emunand and data (saves, games, etc.) have been transferred to your new SD card!
http://gbatemp.net/threads/tutorial-installing-rxtools-custom-firmware-3ds-and-2ds.390867/
 

bas3

New Member
Newbie
Joined
Feb 25, 2016
Messages
1
Trophies
0
Age
36
XP
52
Country
Netherlands
I wonder whether anyone could help me play Fire Emblem IF using Sky3ds+ (orange button) out of region? (JP rom, EU O3DS)

I tried using Homebrew Launcher and HANS (using sysnand 10.3), both had no problem running other US ROMs, but neither even recognizes the ROM when I try to load the FE ROM. I tried several different ROMS from different sites but none of them work.

So I downgraded sysnand to 9.2, installed emunand and Rxtools. Rxtools recognizes the ROM but when I try to load the ROM it gives an error message: "This game card cannot be used."

So I wonder whether anyone can help me or whether there are other options to play FE out of region?
 

Ankry

Active Member
Newcomer
Joined
Feb 7, 2016
Messages
35
Trophies
0
Age
54
XP
94
Country
Barbados
How can I find out, which version of AuReiNAND is installed on my device? I am using A9LH with updated SysNAND.

And... how can I upgrade AuReiNAND to the latest version?
 

njaynl

Well-Known Member
Newcomer
Joined
Apr 9, 2013
Messages
65
Trophies
0
Age
43
XP
165
Country
Netherlands
tommorow i will be getting my ocarina of time 3ds and my datel powersaves... wish me luck getting my otp and cfw :P
 

Vilelowres

New Member
Newbie
Joined
Mar 21, 2016
Messages
3
Trophies
0
Age
35
XP
51
Country
United States
Hey im on 9.9u (new 3ds xl hyrule gold) and trying to downgrade to 9.2 using browserhax to menuhax and then sysupdating. I finally after 300 tries or so and lots of research got it to find my files and it started to varify them but i realized i has only half a battery so i decided to plug it in to chaarge and sit. As soon as i plugged it in it gave me an error and went back to the normal ds home screen and when i reboot it with the sd card in all i get is a black screen. Ive tried reverting my sd card to factory default and also tried going back to right after i browserhaxed . It turns on to the basic screen but wont go to menuhax. I set my clock to jan 1st 2000 00:00 and reattempted browserhax but now its no longer working it freezes on the yellow screen. Any clue on what my next step is?
 
N

NoGamer

Guest
If you open system settings do you get a error ? I has a similair issue like u and i was left with a Franken Firmware..
 

Garou

Well-Known Member
Member
Joined
Jan 13, 2015
Messages
1,213
Trophies
0
XP
1,667
Country
Hey im on 9.9u (new 3ds xl hyrule gold) and trying to downgrade to 9.2 using browserhax to menuhax and then sysupdating. I finally after 300 tries or so and lots of research got it to find my files and it started to varify them but i realized i has only half a battery so i decided to plug it in to chaarge and sit. As soon as i plugged it in it gave me an error and went back to the normal ds home screen and when i reboot it with the sd card in all i get is a black screen. Ive tried reverting my sd card to factory default and also tried going back to right after i browserhaxed . It turns on to the basic screen but wont go to menuhax. I set my clock to jan 1st 2000 00:00 and reattempted browserhax but now its no longer working it freezes on the yellow screen. Any clue on what my next step is?
try again
yellow screen means the exploit still works https://github.com/yellows8/3ds_browserhax_common#screen-colors

you can try to reset initial data on the browser setting, or delete webkithax_tmp.bin from the sd card
not sure if this helps but I did this when the browserhax not working and sometimes it then works
 

fantoboy

Active Member
Newcomer
Joined
Jul 22, 2013
Messages
39
Trophies
0
Age
48
XP
142
Country
United States
I have a N3DS on 9.0.0-20U. I've had the Gateway for a while. I recently used a flashcard that removed my dsprofile exploit. I came here to see how to reinstall it, but now I see all this stuff about menuhax and browserhax. I've been told elsewhere that I can launch gateway mode on power up using menuhax. I would also like to install retroarch in conjunction with the Gateway. Is there a tutorial on how to do that? Or should I start here: https://gbatemp.net/threads/beginners-guide-–-how-to-setup-your-3ds-for-gbatemp.399538/
 
Last edited by fantoboy,

rody2k6

Well-Known Member
Member
Joined
Dec 30, 2009
Messages
230
Trophies
1
XP
382
Country
United States
How to move Games, Saves, Themes, and Emunand to a new SD card
  1. Get 3DS Multi EmuNAND Creator
  2. Insert your old SD card in your PC
  3. Open 3DS Multi EmuNAND Creator with Administrator privileges and select "Extract NAND"
  4. Save the EmuNAND backup somewhere on your PC (as [EmuNAND firmware version] emunand.bin if you want)
  5. Wait for the "Operation successfully completed!" message to pop up, then click OK. You now have your EmuNAND backup from your old SD card.
  6. Backup all your SD card files to your PC
  7. Close 3DS Multi EmuNAND Creator and eject your old SD card
  8. Insert your new SD card in your PC
  9. Open 3DS Multi EmuNAND Creator again
  10. Under the Format EmuNAND section, make sure that your new SD card is selected, then click "Start Format"
  11. Select the emunand bin file you made in step 4 and click Open
  12. Click Yes at the warning to start the process
  13. Wait for the green bar to reach the end and the "Operation successfully completed!" message to pop up, then press OK
  14. Close 3DS Multi EmuNAND Creator
  15. Put the SD card files from your old sd card backup (from step 5) on your new SD card
  16. Done, emunand and data (saves, games, etc.) have been transferred to your new SD card!
http://gbatemp.net/threads/tutorial-installing-rxtools-custom-firmware-3ds-and-2ds.390867/


Everytime that I click format the program crashes
 

thedude28

Well-Known Member
Member
Joined
Jul 28, 2015
Messages
529
Trophies
0
Age
27
XP
272
Country
Canada
I have a N3DS on 9.0.0-20U. I've had the Gateway for a while. I recently used a flashcard that removed my dsprofile exploit. I came here to see how to reinstall it, but now I see all this stuff about menuhax and browserhax. I've been told elsewhere that I can launch gateway mode on power up using menuhax. I would also like to install retroarch in conjunction with the Gateway. Is there a tutorial on how to do that? Or should I start here: https://gbatemp.net/threads/beginners-guide-–-how-to-setup-your-3ds-for-gbatemp.399538/

1. For the DS Exploit, you have to reinstall it every time you use a flash card. The only exception to this is if you stick the DS Exploit.

2. You can launch Gateway through Menuhax.

3. I'm pretty sure Retroarch has a cia that you can install via Gateway.
 

fantoboy

Active Member
Newcomer
Joined
Jul 22, 2013
Messages
39
Trophies
0
Age
48
XP
142
Country
United States
1. For the DS Exploit, you have to reinstall it every time you use a flash card. The only exception to this is if you stick the DS Exploit.

2. You can launch Gateway through Menuhax.

3. I'm pretty sure Retroarch has a cia that you can install via Gateway.


Ok thanks. So do I just follow any tutorial to install menuhax? I don't need to adjust what I'm doing to use it with a Gateway?
 

StrawHat-Luffy

Active Member
Newcomer
Joined
Mar 17, 2016
Messages
28
Trophies
0
Age
27
XP
72
Country
France

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    Veho @ Veho: Nope.