Hi i am new here. I have cfw and i notice that games from 2016 doesent start they get freeze in the 3ds screen logo. Why?
Oh boi. OK. Well, first off. DON'T EVER DO THIS AGAIN.At the "OH SHIT I NEEDED MY BACKUP." I'm able to access Hourglass & other payloads if that's what you are asking.
If they are the same region as your console, then open your eshop, and visit the game's page. Once this is done, exit back to the Home menu and try launching it again. If this doesn't work, try repairing the game from eshop (however, this really shouldn't be needed)Hi i am new here. I have cfw and i notice that games from 2016 doesent start they get freeze in the 3ds screen logo. Why?
Oh boi. OK. Well, first off. DON'T EVER DO THIS AGAIN.
And now, to help you.
Follow this part of the guide to get SafeA9LHInstaller setup as a payload.
Link: https://github.com/Plailect/Guide/wiki/Updating-arm9loaderhax
Once you get to Step 7 though, I want you uninstall A9LH.
If this works, you should no longer have A9LH, and should be able to boot into 2.1. Make sure you still have your OTP.bin for this console, we will need it later.
Now for the tricky part. You'll need a game with a 4.X.X or a 6.X.X update on it, if you can manage that, then you are in luck~! Yay~! If you can't go, then go and find one.
Follow these steps for the game cart update: https://github.com/Plailect/Guide/wiki/9.2.0-Update-(Cart-Update)
Then from there, you want to move to this: https://github.com/Plailect/Guide/wiki/9.2.0-Update-(rxTools-2.5.2)
Here is the chart basically showing you how to get out of your situation and back to 9.2.0
Link: https://github.com/Plailect/Guide/wiki/9.2.0-Update
But how because when i enter the eshop a update is require to enter. And i cant do that because will lose the cfw right?Oh boi. OK. Well, first off. DON'T EVER DO THIS AGAIN.
And now, to help you.
Follow this part of the guide to get SafeA9LHInstaller setup as a payload.
Link: https://github.com/Plailect/Guide/wiki/Updating-arm9loaderhax
Once you get to Step 7 though, I want you uninstall A9LH.
If this works, you should no longer have A9LH, and should be able to boot into 2.1. Make sure you still have your OTP.bin for this console, we will need it later.
Edit: If for some reason you don't have your OTP.bin. Then follow this before attempting the below.
Link: https://github.com/Plailect/Guide/wiki/9.2.0-Update-(Browser-OTP)
Once you have your OTP.bin continue with the rest of my info to get you out of your situation.
Now for the tricky part. You'll need a game with a 4.X.X or a 6.X.X update on it, if you can manage that, then you are in luck~! Yay~! If you can't go, then go and find one.
Follow these steps for the game cart update: https://github.com/Plailect/Guide/wiki/9.2.0-Update-(Cart-Update)
Then from there, you want to move to this: https://github.com/Plailect/Guide/wiki/9.2.0-Update-(rxTools-2.5.2)
Here is the chart basically showing you how to get out of your situation and back to 9.2.0
Link: https://github.com/Plailect/Guide/wiki/9.2.0-Update
Edit: Once back on 9.2.0 and with your OTP.bin.
You'll want to basically read over the parts after the steps here, telling you how to get A9LH back onto your system.
Link: https://github.com/Plailect/Guide/wiki/9.2.0-Update-(Browser-OTP)
If they are the same region as your console, then open your eshop, and visit the game's page. Once this is done, exit back to the Home menu and try launching it again. If this doesn't work, try repairing the game from eshop (however, this really shouldn't be needed)
What's your setup? What is the CFW you are using right at this moment? Are you on A9LH system setup? Are you using Menuhax+RedNAND//EmuNAND setup? Give me the answers to this, and I can better answer your question.But how because when i enter the eshop a update is require to enter. And i cant do that because will lose the cfw right?
Attempting to use 3DNUS to download the title for the internet browser gave me an error and downloading (through 3DSNUS) installing 11.0.0-20U actually installs 10.7.0-32U. Any help would be appreciated.What's your setup? What is the CFW you are using right at this moment? Are you on A9LH system setup? Are you using Menuhax+RedNAND//EmuNAND setup? Give me the answers to this, and I can better answer your question.
Be sure to look over my edits I made to my post. Added some more info to them.Sweeeet, thank you! I'll look into this after I eat food.
Probably might be because that doesn't exist. You could try getting the -20 browser from the 9.2.0-20 update backs, but hell if I know if that'll work. I am also not sure why'd you want this. As it'll nag you to update.Attempting to use 3DNUS to download the title for the internet browser gave me an error and downloading (through 3DSNUS) installing 11.0.0-20U actually installs 10.7.0-32U. Any help would be appreciated.
Menuhax Rxtools emunandWhat's your setup? What is the CFW you are using right at this moment? Are you on A9LH system setup? Are you using Menuhax+RedNAND//EmuNAND setup? Give me the answers to this, and I can better answer your question.
I want to dump ram (not the rom) from some games and the only way I found was to use a browser exploit.Probably might be because that doesn't exist. You could try getting the -20 browser from the 9.2.0-20 update backs, but hell if I know if that'll work. I am also not sure why'd you want this. As it'll nag you to update.
While in EmuNAND, go to System Settings -> Other Settings -> System Update. Again, make sure you are in EmuNAND. It should say RX-E in front of your system version.Rxtools emunand
Can't NTR dump ram? Sorry if I'm mistaken in that matter, never bothered much with NTR. Anyways, good luck with that.I want to dump ram (not the rom) from some games and the only way I found was to use a browser exploit.
Now for the tricky part. You'll need a game with a 4.X.X or a 6.X.X update on it, if you can manage that, then you are in luck~! Yay~! If you can't go, then go and find one.
Follow these steps for the game cart update: https://github.com/Plailect/Guide/wiki/9.2.0-Update-(Cart-Update)
Then from there, you want to move to this: https://github.com/Plailect/Guide/wiki/9.2.0-Update-(rxTools-2.5.2)
Here is the chart basically showing you how to get out of your situation and back to 9.2.0
Link: https://github.com/Plailect/Guide/wiki/9.2.0-Update
Edit: Once back on 9.2.0 and with your OTP.bin.
You'll want to basically read over the parts after the steps here, telling you how to get A9LH back onto your system.
Link: https://github.com/Plailect/Guide/wiki/9.2.0-Update-(Browser-OTP)
Yup, that's right, follow that part of the guide now, and you'll be on 9.2.0-20U.Thanks for helping me again. Okay, so I do have an OTP.bin file which I did backed up, got that. I found Luigi's Mansion, used that which has the 4.5.0 firmware update and did as the guide mentioned going into updating it (my system settings is now 4.5.0-4U). I am just about to use rxTools-2.5.2 as mentioned above but I am going to check in with you if I am doing this correctly before I proceed.
Ok. Now it works. Thx manWhile in EmuNAND, go to System Settings -> Other Settings -> System Update. Again, make sure you are in EmuNAND. It should say RX-E in front of your system version.
Once that's done, boot back into EmuNAND, and you should be good to go.
However, consider switching away from rxTools. rxTools is dead, like dead dead. It's no longer being worked on, and one of these days it will break and you won't be able to update your EmuNAND any longer.
Switch to Luma3DS. Tutorial for that can be found here: Link: https://gbatemp.net/threads/tutorial-updating-from-rxtools-to-luma3ds.427735/
If you want to get rid of EmuNAND, and not have to worry about losing CFW ever again, consider investing time into A9LH.
Plailect's A9LH Guide: https://github.com/Plailect/Guide/wiki
Can't NTR dump ram? Sorry if I'm mistaken in that matter, never bothered much with NTR. Anyways, good luck with that.
BumpDo 3DS mods (more specifically Sm4sh work on 11.0.0 33-U software (stock)? Can you get a 3DS at 11.0 on CFW with or without another 3DS that already has?
Shouldn't really matter. I'd say screen-init though. Anyways, the difference is just that no-screen-init doesn't have that flash when you boot it up, and looks more stock like. Luma3DS' chainloader should initialize any payloads that need initialization. Except GW, you'll need BootCTR9 for that, which I mentioned to you before.Hello again, I am on Part 5 of the guide. Section I #5. Do i use the screeninit or noscreeninit?
I don't believe NTR can. I found a factory titles .NCCH on that ISO site. Do you know what this is and how I can use it? It also says Ticket and TMD needed.Can't NTR dump ram? Sorry if I'm mistaken in that matter, never bothered much with NTR. Anyways, good luck with that.
No idea on that matter. Hopefully someone with more knowdledge on that matter can help you. Sorry.I don't believe NTR can. I found a factory titles .NCCH on that ISO site. Do you know what this is and how I can use it? It also says Ticket and TMD needed.
Double check your files on your SD Card. Make sure they are all in the correct place. Then keep trying.Im on Part 5 Section II trying to install through the url and it loads and then freezes like this