Hello, I have configured a controller.ini file for my Hori Battle Pad For Switch usb gamepad.
According to HID-test it works fine with this controller.ini file. All buttons are configured correctly.
But it still does not work at all in Nintendont.
Do I have to do anything else with Nintendont to make it work? I mean except putting the controller.ini into root folder.
Hello, I have configured a controller.ini file for my Hori Battle Pad For Switch usb gamepad.
According to HID-test it works fine with this controller.ini file. All buttons are configured correctly.
But it still does not work at all in Nintendont.
Do I have to do anything else with Nintendont to make it work? I mean except putting the controller.ini into root folder.
I can't get any of the controller.ini files to register. I've tried putting them in every possible folder, and have removed any "controllers" folders on my SD. The controller is a ds3 and it works fine otherwise but I'd just like to remap the face buttons. Any ideas?
New user here. I am currently working on getting the 8BitDo M30 Genesis controller working on the Wii. I wanted to use it for the Sonic Mega and Gems Collections, and it connects just fine in D-Input mode. I've nearly got it down, but I'm encountering problems with the D-Pad. Let me just post the values first.
00 00 0F 7F 7F 7F 7F 00 00 Default
01 00 0F 7F 7F 7F 7F 00 00 A
02 00 0F 7F 7F 7F 7F 00 00 B
80 00 0F 7F 7F 7F 7F 00 00 C
08 00 0F 7F 7F 7F 7F 00 00 X
10 00 0F 7F 7F 7F 7F 00 00 Y
40 00 0F 7F 7F 7F 7F 00 00 Z
00 08 0F 7F 7F 7F 7F 00 00 Start
00 04 0F 7F 7F 7F 7F 00 00 Mode
00 00 00 7F 7F 7F 7F 00 00 D-Pad Up
00 00 02 7F 7F 7F 7F FF 00 D-Pad Right
00 00047F 7F 7F 7F 00 00D-Pad Down
00 00067F 7F 7F 7F 00 FFD-Pad Left
00 00 0F 00 7F 7F 7F 00 00 Left Stick X (Left)
00 00 0F FF 7F 7F 7F 00 00 Left Stick X (Right)
00 00 0F 7F 00 7F 7F 00 00 Left Stick Y (Up)
00 00 0F 7F FF 7F 7F 00 00 Left Stick Y (Down)
00 00 0F 7F 7F 00 7F 00 00 Right Stick X (Left)
00 00 0F 7F 7F FF 7F 00 00 Right Stick X (Right)
00 00 0F 7F 7F 7F 00 00 00 Right Stick Y (Up)
00 00 0F 7F 7F 7F FF 00 00 Right Stick Y (Down)
00 01 0F 7F 7F 7F 7F FF 00 Left Shoulder (L)
00 02 0F 7F 7F 7F 7F 00 FF Right Shoulder (R)
There are several hexes after this that are not used.
Note that you can swap the sticks and dpad by holding Mode + Up (D-Pad), Mode + Left (Left Stick) and Mode + Right (Right Stick).
So far I have been able to map the buttons and sticks properly, but the D-Pad values always turn out...odd. Here's my controller file so far:
I wasn't sure what MultiLineIn, MultiIn and Power did, so I just linked them to unused values.
Okay, now for the issue. With this particular setup, Left, Down, and Right are all positive, and Up is negative. When pressed, Left has no effect, Right changes itself negative, Up turns all negative, and Down turns itself negative. What exactly is going on here?
Also, the buttons work just fine when the controller file isn't present in the SD card, but once it is, they aren't recognized...most of the time. In a few of my tests they worked, but others they didn't. Have no idea what's going on there.
Hopefully this isn't too much to ask. I plan on working on the SN30 Pro after this is done, and I expect it will be similar!
Have you figured a way to connect it? The simple though of being able to play Capcom Vs SNK EO with a 6 button pad is enticing, I would configure it (taking cues from the Hori Gameboy Player controller) as A=B B=A X=Y Y=X C=R and Z=Lwith the shoukder buttons acting as duplicates and - as Z, and maybe I would add a mode to use L and R as Z
I have mine, a 2.4 Genesis version, so if I could use it I would be happy
Have you figured a way to connect it? The simple though of being able to play Capcom Vs SNK EO with a 6 button pad is enticing, I would configure it (taking cues from the Hori Gameboy Player controller) as A=B B=A X=Y Y=X C=R and Z=Lwith the shoukder buttons acting as duplicates and - as Z, and maybe I would add a mode to use L and R as Z
I have mine, a 2.4 Genesis version, so if I could use it I would be happy
From what I've tested out in the past, just connect the controller while it's in Mac Mode (Start + B, I think) It just works right off the bat, and I wasn't expecting it to work initially. The mappings are all 1:1 (A = A, B= B, and C=R, Z = L), so it's not exactly what you're looking for. I haven't really done anything to make a custom layout since discovering that Mac mode works, so there's that.
From what I've tested out in the past, just connect the controller while it's in Mac Mode (Start + B, I think) It just works right off the bat, and I wasn't expecting it to work initially. The mappings are all 1:1 (A = A, B= B, and C=R, Z = L), so it's not exactly what you're looking for. I haven't really done anything to make a custom layout since discovering that Mac mode works, so there's that.
Thank you very much! Does Dinput works in the 2.4 Genesis model? If so I am set, fortunely what I want to play is a fighting game so mapping is not an issue, the issue could come back if I want to play Wind waker or Paper Mario though
Thank you very much! Does Dinput works in the 2.4 Genesis model? If so I am set, fortunely what I want to play is a fighting game so mapping is not an issue, the issue could come back if I want to play Wind waker or Paper Mario though
You mean the radio frequency model instead of Bluetooth? Well, if it can connect to a computer, I would assume it should work. I only have the Bluetooth Model, so I can't help you there.
please someone help me
[control 1]
VID = 2563
PID = 0973
Polltype = 1
MultiIn = 1
MultiInValue = 01
DPAD = 1
DigitalLR = 1
LAnalog = 0
RAnalog = 0
A = 4.40
B = 4.80 X = 4.20
Y = 4.10
Z = 5.08
L = 5.01
R = 5.02
Power = 5.10
S = 5.20
Left = 4.06
Down = 4.04
Right = 4.02
Up = 4.00
RightUp = 4.01
DownRight = 4.03
DownLeft = 4.05
UpLeft = 4.07
StickX = 1
StickY = 0
CStickX = 3
CStickY = 2
if someone had an equal this vid and pid that works or can make the b x y z l r works wheel nintendont vo is happy too thank you so much for helping me
Hi, noob here, I need to open HIDTEST but I dont now how, I tried to put the .dol in the apps folder but it doesnt appear in the homebrew channel, please help. I think I can do the rest to create the .ini file for my controller
Hi, noob here, I need to open HIDTEST but I dont now how, I tried to put the .dol in the apps folder but it doesnt appear in the homebrew channel, please help. I think I can do the rest to create the .ini file for my controller
The turbo button on my Chinese 3rd party GC adapter may be causing it to input controls without me pressing any of the buttons (I'm using oem wavebird). Is there a way to disable the turbo button completely from the .ini file?
??? = Not entirely sure how to get or if they're correct
Hi, noob here, I need to open HIDTEST but I dont now how, I tried to put the .dol in the apps folder but it doesnt appear in the homebrew channel, please help. I think I can do the rest to create the .ini file for my controller
Heres a config for the pokemon powera switch controller, I set S as the home button as I assume that means start. Is it possible to bind the + and - buttons for swapping a/b?
Today, April 8th, 2024, at 4PM PT, marks the day in which Nintendo permanently ends support for both the 3DS and the Wii U online services, which include co-op play...
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
The highly popular and accurate FPGA hardware, MisterFGPA, has received today a brand new update with a long-awaited feature, or rather, a new core for hardcore...
TheFlow has done it again--a new kernel exploit has been released for PlayStation 4 consoles. This latest exploit is called PPPwn, and works on PlayStation 4 systems...
Nintendo might just as well be a law firm more than a videogame company at this point in time, since they have yet again issued their now almost trademarked usual...
Another video game prototype has been found and preserved, and this time, it's none other than the game that spawned an entire franchise beloved by many, the very...
Anbernic is back with yet another retro handheld device. The upcoming RG28XX is another console sporting the quad-core H700 chip of the company's recent RG35XX 2024...
Nintendo has recently announced through their social media accounts that a new Indie World stream will be airing tomorrow, scheduled for April 17th, 2024 at 7 a.m. PT...
Today, April 8th, 2024, at 4PM PT, marks the day in which Nintendo permanently ends support for both the 3DS and the Wii U online services, which include co-op play...
Nintendo might just as well be a law firm more than a videogame company at this point in time, since they have yet again issued their now almost trademarked usual...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
TheFlow has done it again--a new kernel exploit has been released for PlayStation 4 consoles. This latest exploit is called PPPwn, and works on PlayStation 4 systems...
Two classic titles join the Nintendo Switch Online Expansion Pack game lineup. Available starting April 24th will be the motorcycle racing game Extreme G and another...
The highly popular and accurate FPGA hardware, MisterFGPA, has received today a brand new update with a long-awaited feature, or rather, a new core for hardcore...
Nintendo has recently announced through their social media accounts that a new Indie World stream will be airing tomorrow, scheduled for April 17th, 2024 at 7 a.m. PT...
In 2017, the United States Federal Communications Commission (FCC) repealed net neutrality. At the time, it was a major controversy between internet service providers...