Last edited by White_Raven_X,
D
Deleted User
Guest
Hello there Sir,
Long time GBAtemp lurker looking for an install service for a Trinket within the UK. I understand that you are the man to speak to, however I am unable to
PM you for some reason, maybe that I have rarely use my account on this forum. Can you please PM me??
Cheers,
Jimbo
Long time GBAtemp lurker looking for an install service for a Trinket within the UK. I understand that you are the man to speak to, however I am unable to
PM you for some reason, maybe that I have rarely use my account on this forum. Can you please PM me??
Cheers,
Jimbo
Hello Guys,
today i need your help. I installed a Trinket M0 in my Switch. Plus and USB Strap are soldered.
Now my problem:
I want to updated the Trinket, so i started the cfw, connected the usb cable and put the switch to standby.
After this a Uf2 device popup, i put Part 1 (Perma CFW) to the device. Than Part 2 (Switchboot).
After a restart and vol -, i see Hekate 5.0.1 not 5.0.2.
Thanks for help.
Cheers,
Prime
today i need your help. I installed a Trinket M0 in my Switch. Plus and USB Strap are soldered.
Now my problem:
I want to updated the Trinket, so i started the cfw, connected the usb cable and put the switch to standby.
After this a Uf2 device popup, i put Part 1 (Perma CFW) to the device. Than Part 2 (Switchboot).
After a restart and vol -, i see Hekate 5.0.1 not 5.0.2.
Thanks for help.
Cheers,
Prime
OK... You either downloaded old files (maybe a few days ago?) I fooked up and didn`t mirror to the MODCHIP_LATEST folder which is what the links in OP use.
Or you have update.bin in /bootloader and it is catching that.
Got a good question for who ever can answer this. I just replaced my digitizer... Screen works perfect in hekate but doesn't fully work when loaded into switch menu . This is very strange. Any ideas??
Indeed strange. Different digitizer voltage levels between payload power management and official HOS power management)I`m guessing. I would have said earthing (in ipads we used to run a bead of Kapton round the perimeter to prevent "phantom touches").
Double-cleck ribbon cable is clean. A high impedance on one of the traces in the ribbon could cause it, especially if voltage levels are different.
Go over ribbon cable connection with a fibreglass pen gently(or an eraser) washed off with isopropyl
Last edited by mattytrog,
Update.: the digitizer is the problem as I connected the old one and it works great (it's just not pretty) and then reconnected the new one and won't work. So I have another digitizer coming. Just sucks that Chinese shit can't be reliable even when new.
Last edited by White_Raven_X,
The nature of the beast unfortunately.
Probably better off getting a good used screen.
Nothing new to expect when you buy from a wholesaler, you are bound to get fake shit, even though Im a Chinese myself, it is not a Chinese problem more like a global problem when it come to wholesale you are bound to get stuff that doesn't work when you buy from a wholeseller.
Hi all,
Hopefully going to get a Trinket install if all goes well this month...I’m a bit of a noob when it comes to this hardmod, just a couple questions I wanted to ask;
What are straps and if a Trinket install is included with“all straps” what does that mean? Are these button combinations to boot into the Trinket payload?
Looney
Sent from my iPhone using Tapatalk
Hopefully going to get a Trinket install if all goes well this month...I’m a bit of a noob when it comes to this hardmod, just a couple questions I wanted to ask;
What are straps and if a Trinket install is included with“all straps” what does that mean? Are these button combinations to boot into the Trinket payload?
Looney
Sent from my iPhone using Tapatalk
All straps = Joycon, VOL+, USB Power on reset, USB data, PWR+ and GND.
They are all straps.
Go to various points on the motherboard, to emulate putting a jig in and plugging in a payload pusher.
They are all straps.
Go to various points on the motherboard, to emulate putting a jig in and plugging in a payload pusher.
Understood except joycon...Is this a joycon eject instead of vol+ combined with power to boot a payload?
Sent from my iPhone using Tapatalk
There is a hidden function (the TRUE nvidia home button - not the picture of the house on the joycon)
This needs activating every boot. We short it to GND
Plus a press of VOL+
This enabled RCM mode. Then we fill the USB buffer, collapse said buffer and run any code we like.
Last edited by mattytrog,
So basically no need to press vol+? Boots into payload with just a power button press as everything else is done by the straps? No need for AutoRCM?
Sent from my iPhone using Tapatalk
Similar threads
- No one is chatting at the moment.
-
-
@
Sonic Angel Knight:
Or, I also heard that if you use flash memory, it can act as more "RAM" at least windows tell me when I stick a flash drive into it. -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@
K3Nv2:
I can think of the design teams process another joystick and no audio or a joystick and mono audio -
-
-
-
-
-
-
-
