try this:
1) boot to hekate
2) double press reset
3) connect
4) boot something
and now open switchboot on my pc
or you must wait for mattys answer
try this:
1) boot to hekate
2) double press reset
3) connect
4) boot something
and now open switchboot on my pc
or you must wait for mattys answer
ohhhhh
I try now your opinnion
greets
Niceeeee thxxxx its worxx reallly with the methode was that now new sooo ?
Yes. With firmware 7.0.0 / sept etc, you can no longer access SWITCHBOOT uf2 drive. Nintendo changed something (by the looks of it) and it hijacks the USB port.
With the newer Switchboot versions, there is a SAMD21 update mode. Which should let you update without booting into HOS.
yes this is new with switchboot version 1.0
now dont forget it ^^
Thank-you for helping the chap out sir!
The newest one. Follow the OP. Switchboot part 1 controls the straps. You choose a file to either boot into CFW all the time, or dual-boot.
I still support method 3 with software, but it is very out of date. Better ways of doing things now!
v1.3.2 coming in the morning. Not tonight as I`m tired...
Changelog:
--------------------- MERGED ---------------------------
Yes. I called "Universal method". Don`t know why!
In the modchip thread, they are all the latest drawings / pictures. Follow that.
Then, flash part 1 UF2 (once only)
then flash part 2 UF2 (latest version?)
Done.
Changelog:
- Latest Hekate upstream changes
- SD device clock speed correction... See Ctcaers git for more.
--------------------- MERGED ---------------------------
Yes. I called "Universal method". Don`t know why!
In the modchip thread, they are all the latest drawings / pictures. Follow that.
Then, flash part 1 UF2 (once only)
then flash part 2 UF2 (latest version?)
Done.
okay
the menu is hekate like one with 4.10.0 Or ?
With opinion payload. bin / payload 1. bin ?
Greets
kermit
--------------------- MERGED ---------------------------
the menu is hekate like one with 4.10.0 Or ?
With opinion payload. bin / payload 1. bin ?
Greets
kermit
--------------------- MERGED ---------------------------
Yes. It is a quite heavily modified version of Hekate that adds features for modchip users.
If payload, or payload1 or 2 or 3 etc etc is found, this will boot automatically.
The uf2 update is the only method that does anything. I've tried it a couple of times then reboot to 1.3.1 boot to check status and it's the same it says my vol+ is disabled.
I've checked the soldering on my rcmx86 and it looks fine.
When i get a chance I'll open it up and disconnect usb strap and see if that helps.
I've no idea with gold tree or whatever it's called.
But I do know that the diagrams and code are correct. I'm thinking it is a soldering issue or that usb logic ic. I'll have a play tomorrow with a rcmx86 and see if can straighten the issues out.
I've always just used tinfoil 0.2.1 and aluminum to xfer and it used to work. Try those.
Thanks I've downloaded tinfoil 1.55 and nut server...
RCMX86 here.
No problem with USB install.
Similar threads
- No one is chatting at the moment.
-
-
-
-
-
-
-
-
-
-
-
-
-
@
Psionic Roshambo:
32GBs is the baseline for 4K video editing these days and lots of recommendations for 64GBs but for games 16,GBs is honestly plenty for a long time. -
-
-
-
-
-
-
-
-
-
@
Psionic Roshambo:
Some sort of police thing going on near me lol "Get out of the car with your hands up and walk backwards towards us" over a loud speaker thing
-
-
like a 250 dollar kit back when DDR4 was Intel only
