Hacking SNEEK v2

ClockWorK · Jan 31, 2010

@tj_cool

Honestly, I never even knew that menu was there. I've always just let the HomeBrew Channel auto-detect the device. I can hear my HDD spin up when I load the HomeBrew Channel, but nothing shows up (when running under SNEEK).

Too bad all of the Device options are unclickable (disabled, grayed, etc). :-\

Also, if I hit Home, while in the HBC, it seems to lock up the Wii.

So, I'm not sure how to proceed. Everything works fine without SNEEK. Maybe I'll try cleaning my NAND dump or something... Any suggestions welcome.

EDIT: Looks like it was a HDD Sleep issue. Normally, my HDD wakes up automatically when I load HBC. I tried cycling the power while HBC was loading, and it's all good. Still strange that I think I only need to do this when running under SNEEK.

DarkBowser · Jan 31, 2010

Does anybody know, how I can install a custom system menu on sneek? Because there have to be a .csm file on the not available sd card. Soft Tweak doesn't accept USB

sirakain · Jan 31, 2010

.csm is a renamed .app
Copy the original SM .app by the.csm (rename it) and voila!

VashTS · Jan 31, 2010

What is the smallest NAND possible with this? I deleted a ton of files from a dump of mine, but it failed to load correctly. I'm gonna try further I'll post my results. Let me know what sizes your dumps can be scrubbed down to.

nicksasa · Jan 31, 2010

someone should try the compability dump simple fs dumper can make in sneek, in theory it should atleast boot

longtom1 · Jan 31, 2010

VashTS said:
What is the smallest NAND possible with this? I deleted a ton of files from a dump of mine, but it failed to load correctly. I'm gonna try further I'll post my results. Let me know what sizes your dumps can be scrubbed down to.

http://code.google.com/p/wii-fsck/wiki/EssentialFiles have a look tells you there

Justin121994 · Jan 31, 2010

Is there a program that you can transfer all your from your real nand to then sd-nand sneek uses?

FenrirWolf · Jan 31, 2010

Any dumper will do that. That's the whole point of using one in the first place.

longtom1 · Jan 31, 2010

Justin121994 said:
Is there a program that you can transfer all your from your real nand to then sd-nand sneek uses?

Do a bootmii nand backup and extract the files from the nand.bin with showmiiwads or nandextract-0.1.3

crwys · Jan 31, 2010

Mine is abut 135mb. With the hombrew channel, a couple saves, and that big Super Smash Bros Brawl save >

longtom1 · Jan 31, 2010

got my dump and installed cIOSCORP on the emu nand(with showmiiwads) can play disks from the disk channel on sneek, it's a pity about homebrew apps and cios's tried cIOS38 from cioscorp installed as IOS249 and still wouldn't work

Justin121994 · Jan 31, 2010

I know thats the point but I extracted a few week old dump. Because I made a new dump and it doensn't boot up and the old one does so I just wanted to transer saves

Pippin666 · Jan 31, 2010

Pippin666 said:
Thank you to who ever will answer me.

1) If I understand right, I can use FS Dumper to dump my nand, have bootmii as boot2, replace the armboot.bin from sd:/bootmii/ with the one from SNEEK's googlecode and set bootmii to autoboot HBC ??

2) Either it's FS Dumper or SNEEK "bug", cIOS such as 249, 223 and the likes will not be useable, therefore no usb loader will work ?? OR, can I still boot SNEEK and install any cIOS from the emulated nand (SNEEK) ??

3) Hotswapping the sd card while using SNEEK is not possible ??

Pip'

Anyone ??

Pip'

Det1re · Jan 31, 2010

longtom1 said:
tried cIOS38 from cioscorp installed as IOS249 and still wouldn't work

It doesn't work? Will a game work, which is patched to use IOS38 (or a game that uses it by default)?

cman1783 · Jan 31, 2010

xflak40 said:
SNEEK v2 Auto-Installer rev4 (by X-Flak)

The easiest LEGAL way to get all the files you need for SNEEK to work!

this is the last update for it, i promise (I know I said the same thing for v3, and v3 still works fine, i just made v4 even more user-friendly).

Usage/Instructions (now on the Complete Softmod Guide)

Mediafire is down for some reason. Can you upload to megaupload or anything other than rapidsh(it)are?

tj_cool · Jan 31, 2010

cman1783 said:
Mediafire is down for some reason. Can you upload to megaupload or anything other than rapidsh(it)are?

Most files that are used by my guide are mirrored there as well

http://sites.google.com/site/completesg/do...?attredirects=0

wilsoff · Jan 31, 2010

DarkBowser said:
Does anybody know, how I can install a custom system menu on sneek? Because there have to be a .csm file on the not available sd card. Soft Tweak doesn't accept USB

See the bottom of this post, here under "how do I install custom systemmenus (themes) onto the SD-FS"

QUOTE(Pippin666 @ Jan 30 2010, 09:38 PM) Thank you to who ever will answer me.

1) If I understand right, I can use FS Dumper to dump my nand, have bootmii as boot2, replace the armboot.bin from sd:/bootmii/ with the one from SNEEK's googlecode and set bootmii to autoboot HBC ?? Yes, you will also need boot2.bin from sneek in the root of your SD

2) Either it's FS Dumper or SNEEK "bug", cIOS such as 249, 223 and the likes will not be useable, therefore no usb loader will work ?? OR, can I still boot SNEEK and install any cIOS from the emulated nand (SNEEK) ?? It's most likely a bug with cIOS since all official IOS work. USB loaders seem not to work, but some people have reported success, we'll have to wait until someone figures out exactly what's going on. You can install cIOS to the nand, but they may not be useable.

3) Hotswapping the sd card while using SNEEK is not possible ?? Correct

Pip'

However, the best way to get an answer to these questions is to try it out yourself.

zoomx · Jan 31, 2010

If there is a dol that is able to start the armboot.bin file it is possible to start the sneek in a wii without softmod using bannerbomb to start the first dol?

SanGor · Jan 31, 2010

many people seems to try cIOS again and again and those should read this:

Code:

cIOS doesn't work
The reason why most cIOS do not work is currently unknown. When SNEEK tries to load a cIOS one module does not return when loaded by the kernel and just freezes. Which means that the issue doesn't seem to be solveable via SNEEK, the cIOS authors must either fix their cIOS or if SNEEK is at fault supply a fix or at least the exact issue. SNEEK has no code in place which would prevent cIOS from working!

that is from the official FAQ which you can find there -> http://code.google.com/p/sneek/wiki/FAQ

we can now all stop trying and have to wait for the cIOS authors to act!

longtom1 · Jan 31, 2010

SanGor said:
many people seems to try cIOS again and again and those should read this:

Code:

cIOS doesn't work The reason why most cIOS do not work is currently unknown. When SNEEK tries to load a cIOS one module does not return when loaded by the kernel and just freezes. Which means that the issue doesn't seem to be solveable via SNEEK, the cIOS authors must either fix their cIOS or if SNEEK is at fault supply a fix or at least the exact issue. SNEEK has no code in place which would prevent cIOS from working!

that is from the official FAQ which you can find there -> http://code.google.com/p/sneek/wiki/FAQ

we can now all stop trying and have to wait for the cIOS authors to act!

From what i've read it's cause of the dip module or mload or something if you read the bottom comments

what I don't understand is that all the cios installers work on sneek (well all the ones I've tried network install)

Hacking SNEEK v2

Well-Known Member

Member

Well-Known Member

Beat it, son

Well-Known Member

Keep an eye on my posts cause I quick edit frequen

Bitcoin. coinbase.com/andrew

Well-Known Member

Keep an eye on my posts cause I quick edit frequen

Well-Known Member

Keep an eye on my posts cause I quick edit frequen

Bitcoin. coinbase.com/andrew

SSF43DE Master

det1re.de

Well-Known Member

Site dev

Well-Known Member

Active Member

Witchhunter

Keep an eye on my posts cause I quick edit frequen

Similar threads

Popular threads in this forum