I'm embarrassed to say that not only can't I recall if they are, I can't even recall what "sign_c2w_patcher ready" means! Bear with me, had some neurological problems this fall… can you refresh my memory what that is again?
Lol, no worries dude. Sigb_c2w_cafe patcher is an app you run to overclock your Wii U. It is used with emulators such as Wii64, Not64, Wiistation and others. When your creating forwarders using techmoons program you can set it to accept it if you enable it, otherwise it loads a black screen. Its in one of the option menus when you create the forwarder, just look out for it.
Lol, no worries dude. Sigb_c2w_cafe patcher is an app you run to overclock your Wii U. It is used with emulators such as Wii64, Not64, Wiistation and others. When your creating forwarders using techmoons program you can set it to accept it if you enable it, otherwise it loads a black screen. Its in one of the option menus when you create the forwarder, just look out for it.
Lol, no worries dude. Sigb_c2w_cafe patcher is an app you run to overclock your Wii U. It is used with emulators such as Wii64, Not64, Wiistation and others. When your creating forwarders using techmoons program you can set it to accept it if you enable it, otherwise it loads a black screen. Its in one of the option menus when you create the forwarder, just look out for it.
hbl2hbc no longer works on Aroma. You can change the make parameters of Boot2vWii https://github.com/WiiDatabase/Boot2vWii to launch the channel you want. You'll need to have a forwarder channel for your homebrew installed on the vwii side
I'm starting to wonder if going with Boot2vWii would be the best thing going forward with these forwarders. Just the other day I was trying to open a forwarder without my Gamepad (cause the battery was out) using my WUPC. And I had some trouble getting past the first messages. I had to get out my Wiimote to continue. But Boot2vWii goes right past the messages and boots strait into vWii. And you can use all of the images and icons to go along with it. You can see a long thread of me struggling with it here (spoilers: I'm just a scrub and eventually figured it out).
Nice work!
You should maybe clarify that the WiiFlow forwarder needs the WiiFlow channel installed on the Wii Menu plus it does not support the GamePad or sign_c2w_patcher.
I've recently been doing this same method and releases will be hopefully soon I fully scrapped all my previous Emulators and fully redesigned them New Banners. Logo, Icon, DRC and boot sounds With a full minimalistic look And honestly turned out better than i had thought.
Nice work!
You should maybe clarify that the WiiFlow forwarder needs the WiiFlow channel installed on the Wii Menu plus it does not support the GamePad or sign_c2w_patcher.
Great work here. is there a plan to make boot2vwii forwarders for Nintendont and Not64 like you did for WiiFlow? maybe as TV only version as the gamepad is useless for those two emus anyhow?
This version in this folder is a experimental build which I don't think got pushed out btw Blackb0x had sent me so for latest features use the .dol also
i tried it, when i launch the installed forwarder on wii u menu it launches the usb loader gx succesfully, but when i then try to play some game (thats on sd card) it completely reboots the wii u
Hi! I have problem with a "forwarder pb", it seems since I updated my "01_sigpatches.rpx" to the latest version.
Before, I could use the FCEUTX with my gamepad, the nes emulator could use my + button as "Start" button, but SINCE update, it doesn't work Anymore and I'm not specially sure what is "faulty":
- It's not a forwarder corruption, I downloaded it again, and it installed PROPERLY
- I use the Same game as a Nes game for test, "Fist of the north Star 2", it was working before with gamepad
- It's not my Gamepad, It works perfectly with other forwarders like the GenesisPlus GX or the WIIstation forwarders , this concerns only the FCE Ultra TX forwarders......
PLEASE, what as Changed? Could it be the last 01_sigpatches.rpx the problem??
(the new one is 17 ko whereas the one I used before was 15 ko)
Is it the FCEUTX that must evolve??
OK found the problem that wasn't really one , the START button for NESTX is not "+" like it should be, it UP RIGHT trigger...
Maybe I was using another nes emulator before with "+" as "start" button, too bad the DEV of NESTX doesn't change that, It's like that on others emus
Still on the NES EMUS, you cannot use the "Directionnal Cross" with the gamepad, it is possible to improve the emu?
Maybe Tantric/ Tanooki16/ Saulfabre? And also why not, change the choosen "start button"? ^^
Hola el forwarders de genesis plus gx no funciona con gamepad se queda en la pantalla de press bottom a,eh probado tanto con tiramisú y aroma,eh robado distintas versiones del .dol y nada,sabes cuál sea el problema?
Hola el forwarders de genesis plus gx no funciona con gamepad se queda en la pantalla de press bottom a,eh probado tanto con tiramisú y aroma,eh robado distintas versiones del .dol y nada,sabes cuál sea el problema?
Elru they are fine for loading the apps, but they don't work perfectly with Gamepad each time, for example, "Nes emus" don't have "both" the cross and the directional pad of the WIIU gamepad, only one of them...For example Genesis emu has both, so it's possible to put both, but not the case. Please try with all, then tell me if I'm wrong.
Elru they are fine for loading the apps, but they don't work perfectly with Gamepad each time, for example, "Nes emus" don't have "both" the cross and the directional pad of the WIIU gamepad, only one of them...For example Genesis emu has both, so it's possible to put both, but not the case. Please try with all, then tell me if I'm wrong.
If i understood correctly, you mean using the dpad and analog stick at the same time for movement? (fceux tx does that) Well, that's something you have to claim for the devs of each emulator, in any case, this is configurable in each emulator too and the forwarders works fine as i said
If i understood correctly, you mean using the dpad and analog stick at the same time for movement? (fceux tx does that) Well, that's something you have to claim for the devs of each emulator, in any case, this is configurable in each emulator too and the forwarders works fine as i said
Yes, some emus (the nes app ones) are not finished managing the wiiu gamepad, ot they're might be a bug in the forwarders (possible too)
PABLOLUNAJESUS For me, with latest forwarder and latest genesis plus gx, wiiu gamepad works with all under tiramisu
I have not had any problems with fceugx or fceutx, all the buttons work and load the roms like any other emulator, I don't know what problem you have, but make sure you have the latest versions of each emulator
After a couple days of Nintendo releasing their 18.0.0 firmware update, @SciresM releases a brand new update to his Atmosphere NX custom firmware for the Nintendo...
Today, April 8th, 2024, at 4PM PT, marks the day in which Nintendo permanently ends support for both the 3DS and the Wii U online services, which include co-op play...
Hello, GBAtemp members! After a prolonged absence, I am delighted to announce my return and upgraded form to you today...
Introducing tempBOT AI 🤖
As the embodiment...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The highly popular and accurate FPGA hardware, MisterFGPA, has received today a brand new update with a long-awaited feature, or rather, a new core for hardcore...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
The romhacking community is always a source for new ways to play retro games, from completely new levels or stages, characters, quality of life improvements, to flat...
Retro handheld manufacturer Anbernic is releasing a refreshed model of its RG35XX handheld line. This new model, named RG35XX 2024 Edition, features the same...
Quite a bit of news have unfolded in the past couple of days in regards to the Sonic franchise, for both its small and big screens outings.
To start off, the...
Today, April 8th, 2024, at 4PM PT, marks the day in which Nintendo permanently ends support for both the 3DS and the Wii U online services, which include co-op play...
Hello, GBAtemp members! After a prolonged absence, I am delighted to announce my return and upgraded form to you today...
Introducing tempBOT AI 🤖
As the embodiment...
After a couple days of Nintendo releasing their 18.0.0 firmware update, @SciresM releases a brand new update to his Atmosphere NX custom firmware for the Nintendo...
Nintendo might just as well be a law firm more than a videogame company at this point in time, since they have yet again issued their now almost trademarked usual...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
Two classic titles join the Nintendo Switch Online Expansion Pack game lineup. Available starting April 24th will be the motorcycle racing game Extreme G and another...
The highly popular and accurate FPGA hardware, MisterFGPA, has received today a brand new update with a long-awaited feature, or rather, a new core for hardcore...
Nintendo has recently announced through their social media accounts that a new Indie World stream will be airing tomorrow, scheduled for April 17th, 2024 at 7 a.m. PT...