I'm embarrassed to say that not only can't I recall if they are, I can't even recall what "sign_c2w_patcher ready" means! Bear with me, had some neurological problems this fall… can you refresh my memory what that is again?
Lol, no worries dude. Sigb_c2w_cafe patcher is an app you run to overclock your Wii U. It is used with emulators such as Wii64, Not64, Wiistation and others. When your creating forwarders using techmoons program you can set it to accept it if you enable it, otherwise it loads a black screen. Its in one of the option menus when you create the forwarder, just look out for it.
Lol, no worries dude. Sigb_c2w_cafe patcher is an app you run to overclock your Wii U. It is used with emulators such as Wii64, Not64, Wiistation and others. When your creating forwarders using techmoons program you can set it to accept it if you enable it, otherwise it loads a black screen. Its in one of the option menus when you create the forwarder, just look out for it.
Lol, no worries dude. Sigb_c2w_cafe patcher is an app you run to overclock your Wii U. It is used with emulators such as Wii64, Not64, Wiistation and others. When your creating forwarders using techmoons program you can set it to accept it if you enable it, otherwise it loads a black screen. Its in one of the option menus when you create the forwarder, just look out for it.
hbl2hbc no longer works on Aroma. You can change the make parameters of Boot2vWii https://github.com/WiiDatabase/Boot2vWii to launch the channel you want. You'll need to have a forwarder channel for your homebrew installed on the vwii side
I'm starting to wonder if going with Boot2vWii would be the best thing going forward with these forwarders. Just the other day I was trying to open a forwarder without my Gamepad (cause the battery was out) using my WUPC. And I had some trouble getting past the first messages. I had to get out my Wiimote to continue. But Boot2vWii goes right past the messages and boots strait into vWii. And you can use all of the images and icons to go along with it. You can see a long thread of me struggling with it here (spoilers: I'm just a scrub and eventually figured it out).
Nice work!
You should maybe clarify that the WiiFlow forwarder needs the WiiFlow channel installed on the Wii Menu plus it does not support the GamePad or sign_c2w_patcher.
I've recently been doing this same method and releases will be hopefully soon I fully scrapped all my previous Emulators and fully redesigned them New Banners. Logo, Icon, DRC and boot sounds With a full minimalistic look And honestly turned out better than i had thought.
Nice work!
You should maybe clarify that the WiiFlow forwarder needs the WiiFlow channel installed on the Wii Menu plus it does not support the GamePad or sign_c2w_patcher.
Great work here. is there a plan to make boot2vwii forwarders for Nintendont and Not64 like you did for WiiFlow? maybe as TV only version as the gamepad is useless for those two emus anyhow?
This version in this folder is a experimental build which I don't think got pushed out btw Blackb0x had sent me so for latest features use the .dol also
i tried it, when i launch the installed forwarder on wii u menu it launches the usb loader gx succesfully, but when i then try to play some game (thats on sd card) it completely reboots the wii u
Hi! I have problem with a "forwarder pb", it seems since I updated my "01_sigpatches.rpx" to the latest version.
Before, I could use the FCEUTX with my gamepad, the nes emulator could use my + button as "Start" button, but SINCE update, it doesn't work Anymore and I'm not specially sure what is "faulty":
- It's not a forwarder corruption, I downloaded it again, and it installed PROPERLY
- I use the Same game as a Nes game for test, "Fist of the north Star 2", it was working before with gamepad
- It's not my Gamepad, It works perfectly with other forwarders like the GenesisPlus GX or the WIIstation forwarders , this concerns only the FCE Ultra TX forwarders......
PLEASE, what as Changed? Could it be the last 01_sigpatches.rpx the problem??
(the new one is 17 ko whereas the one I used before was 15 ko)
Is it the FCEUTX that must evolve??
OK found the problem that wasn't really one , the START button for NESTX is not "+" like it should be, it UP RIGHT trigger...
Maybe I was using another nes emulator before with "+" as "start" button, too bad the DEV of NESTX doesn't change that, It's like that on others emus
Still on the NES EMUS, you cannot use the "Directionnal Cross" with the gamepad, it is possible to improve the emu?
Maybe Tantric/ Tanooki16/ Saulfabre? And also why not, change the choosen "start button"? ^^
Hola el forwarders de genesis plus gx no funciona con gamepad se queda en la pantalla de press bottom a,eh probado tanto con tiramisú y aroma,eh robado distintas versiones del .dol y nada,sabes cuál sea el problema?
Hola el forwarders de genesis plus gx no funciona con gamepad se queda en la pantalla de press bottom a,eh probado tanto con tiramisú y aroma,eh robado distintas versiones del .dol y nada,sabes cuál sea el problema?
Elru they are fine for loading the apps, but they don't work perfectly with Gamepad each time, for example, "Nes emus" don't have "both" the cross and the directional pad of the WIIU gamepad, only one of them...For example Genesis emu has both, so it's possible to put both, but not the case. Please try with all, then tell me if I'm wrong.
Elru they are fine for loading the apps, but they don't work perfectly with Gamepad each time, for example, "Nes emus" don't have "both" the cross and the directional pad of the WIIU gamepad, only one of them...For example Genesis emu has both, so it's possible to put both, but not the case. Please try with all, then tell me if I'm wrong.
If i understood correctly, you mean using the dpad and analog stick at the same time for movement? (fceux tx does that) Well, that's something you have to claim for the devs of each emulator, in any case, this is configurable in each emulator too and the forwarders works fine as i said
If i understood correctly, you mean using the dpad and analog stick at the same time for movement? (fceux tx does that) Well, that's something you have to claim for the devs of each emulator, in any case, this is configurable in each emulator too and the forwarders works fine as i said
Yes, some emus (the nes app ones) are not finished managing the wiiu gamepad, ot they're might be a bug in the forwarders (possible too)
PABLOLUNAJESUS For me, with latest forwarder and latest genesis plus gx, wiiu gamepad works with all under tiramisu
I have not had any problems with fceugx or fceutx, all the buttons work and load the roms like any other emulator, I don't know what problem you have, but make sure you have the latest versions of each emulator
Sony made a shocking announcement today, revealing that the company plans to move away from physical game releases in the future. Citing claims of how the industry is...
After much speculation, a lot of which being caused by dbrand's unceremonious reveal of their Companion Cube casing, the Steam Machine is finally available to order...
What once seemed like a far off dream, and after many, many community restarts throughout the years, the elusive Mother 1 / EarthBound Beginnings Remake, which is a...
Since being decompiled Super Mario 64 has seen a considerable amount of interest. We've had multiple PC ports, but the efforts beyond that are really astounding. It's...
Remember when you could get an Xbox Series S for $300? Those were the days. Microsoft has today announced the latest in their console price hikes, seeing their...
Happy June 15th! Well, this one was close enough. Atmosphere has been updated to add support for the latest Nintendo Switch firmware, 22.5.0. This means all of you...
The delays may be behind us, but the news isn't all good for Grand Theft Auto VI. Rockstar have today announced that pre-orders for the game will go live tomorrow, on...
It's that time again. Batten down the hatches and ride out the storm, because we've got another Switch update! And Switch 2, but that's somewhat less impactful given...
After being announced earlier this month, the first early access release for Pokemon Infinite Fusion 2: Hoenn is now live. This first release includes the first two...
Last month we got confirmation of a new model of Switch 2 to better comply with upcoming EU regulations. With the legislation set to come into effect in February of...
Sony made a shocking announcement today, revealing that the company plans to move away from physical game releases in the future. Citing claims of how the industry is...
After much speculation, a lot of which being caused by dbrand's unceremonious reveal of their Companion Cube casing, the Steam Machine is finally available to order...
Remember when you could get an Xbox Series S for $300? Those were the days. Microsoft has today announced the latest in their console price hikes, seeing their...
The delays may be behind us, but the news isn't all good for Grand Theft Auto VI. Rockstar have today announced that pre-orders for the game will go live tomorrow, on...
Last month we got confirmation of a new model of Switch 2 to better comply with upcoming EU regulations. With the legislation set to come into effect in February of...
The end has come for the PlayStation 3 and the PlayStation Vita. After supporting the PSN Store on the PS3 and PS Vita since 2006 and 2011 respectively, Sony has...
Since being decompiled Super Mario 64 has seen a considerable amount of interest. We've had multiple PC ports, but the efforts beyond that are really astounding. It's...
What once seemed like a far off dream, and after many, many community restarts throughout the years, the elusive Mother 1 / EarthBound Beginnings Remake, which is a...
Apple have today announced price increases, primarily focused on their MacBook and iPad lines. These increases have already come into effect, with both prices and the...
It's that time again. Batten down the hatches and ride out the storm, because we've got another Switch update! And Switch 2, but that's somewhat less impactful given...