yes, but the soldering points are different from the ones that appear in the pictures
View attachment 360341
i dont understand the mosfet diagram, it seems diferent in the pics
hi, where can i find it?
yes, but the soldering points are different from the ones that appear in the pictures
View attachment 360341
i dont understand the mosfet diagram, it seems diferent in the pics
hi, where can i find it?
make it picofly, at leastAre we closing this thread?
finally i ended up soldering mosfet directly to left capacitorAnd can i take just the right apu cap to shorten the wire? like this
clean lookingfinally i ended up soldering mosfet directly to left capacitor
I had this issue on an Oled with no resistors.Test #1 - Erista Patched no resistors - Hekate loads = EMMC in slow mode
Are you going to make an installation video at some point?I had this issue on an Oled with no resistors.
Measured the cmd resistor and the ohms were off, eventually purple screened. Uninstalled and switch worked fine, Cmd measured correctly.
TLDR - use some damn resistors.
You either join the resistance or you ohm out of luckI had this issue on an Oled with no resistors.
Measured the cmd resistor and the ohms were off, eventually purple screened. Uninstalled and switch worked fine, Cmd measured correctly.
TLDR - use some damn resistors.
Do meh nxt bbeh.I'll send you to the gulags!
I like this the best. Direct attach…no fiddly cables.finally i ended up soldering mosfet directly to left capacitor
Please check your soldering. Looks like both drains connected to capacitor.finally i ended up soldering mosfet directly to left capacitor
thank you i have corrected my error! Now capacitor connected to drain and sourcePlease check your soldering. Looks like both drains connected to capacitor.
J TipIs anyone using a ts100 iron? Which tip is recommended and solder thickness?
Not sure when the electric parts will turn up but might aswell get myself prepped
ℙ 𝕆 𝔾 𝔾 𝔼 ℝ 𝕊 𝔸 𝔽The 'Atmosphere Unlock' part has been added to the main post
to prevent possible partial / badly unlocked firmwares causing damage to a console.
My congratulations with the security bypass, flynnsmt4!