Your best bet is to use single strand kynar wire. search ebay for "kynar mod wire"Can't get the wire tinned. Seems to be some trashy solder wire I got there...
You will have nothing but problems if you do not have a clean strong joint.
Your best bet is to use single strand kynar wire. search ebay for "kynar mod wire"Can't get the wire tinned. Seems to be some trashy solder wire I got there...
got it all soldered. pass through tested with a multimeter. for some reason win32diskmanager doesn't recognize the drive when the sd is inserted.Your best bet is to use single strand kynar wire. search ebay for "kynar mod wire"
You will have nothing but problems if you do not have a clean strong joint.
got it all soldered. pass through tested with a multimeter. for some reason win32diskmanager doesn't recognize the drive when the sd is inserted.
EDIT: the Wii U's Power LED alternating flashes blue and red. is this because the CLK track is cut?
Is there another point on the MB where I can test the CLK passthrough?
EDIT2: It now only flashes blue
Great to hear you got it working.@Leeful got it dumped
It was a weird procedure. Got the Logilink SD card reader. As I turned on the Wii U it sometimes told me the directorynames cannot be read or that no action can be performed.
Then I rebooted my computer while the SD card was still connected. The computer was stuck in a loop at the Acer logo. As I powered the Wii U back on it the computer booted up and I could dump it
Now I will go for SLC
Please wait, a method to install haxchi on 5.5.2 is coming soon...hardmod downgrade is almost impossible.Hi guys,
Maybe it's a stupid question but someone I know dumped his 5.5.1 NAND but accidentaly update to 5.5.2 when WiiU get back to system. Question is simple : is that hardmod allow us to restaure any NAND dump ? Even a 5.5.1 dump over a 5.5.2 NAND please ? (I mean his own dump naturally) Or this will be limited to an equal or superior NAND version ?
Took me a while to find it. Sorry. For some reason I don't have "Ports" listed on my device manager.The programming instructions are in my unbrick guide. Along with all the links to the software needed
yes, its on port4. But I keep getting this error:Took me a while to find it. Sorry. For some reason I don't have "Ports" listed on my device manager.
But I have found this information about my Teensy:
View attachment 93375
Does Port_#0004 refer to the COM Port?
Did you load the serial drivers? If you have it installed correctly there will be a USB serial device and a second device under portsTook me a while to find it. Sorry. For some reason I don't have "Ports" listed on my device manager.
But I have found this information about my Teensy:
View attachment 93375
Does Port_#0004 refer to the COM Port?
As I powered on the Wii U and plugged it back in I got pop up messages saying that a PS3 modding device has been installed. Now I can also see the Teensy under the described branch on the Device Manager. But the error is still the sameDid you load the serial drivers? If you have it installed correctly there will be a USB serial device and a second device under ports
It is COM Port 4. As I powered on the Wii U i could find the "Ports" entry in the device manager and it says COM4Look at device Manger/Serial(com) Ports to figure out on which Com Port your Teensy is available.
You figured out (screenshot) on which physical Port (USB Port #4) your Teensy is plugged in which is probably not the Serial Port the Driver provides
You don't have the serial python moduleyes, its on port4. But I keep getting this error:
View attachment 93376
installed it. for some reason the wii u doesn'T turn on anymore. the LED stays redYou don't have the serial python module
Run
pip install pyserial
If you don't have pip, run this python script first: https://bootstrap.pypa.io/get-pip.py