1. Gismor

    Gismor GBAtemp Regular
    Member

    Joined:
    Nov 12, 2018
    Messages:
    115
    Country:
    Germany
    welcome back matty.
    i will update my rebug switchme
    What is current the best option for a permament cfw boot?
    the new Fusee Suite or here the switchboot?
     
  2. mattytrog

    OP mattytrog You don`t want to listen to anything I say.
    Member

    Joined:
    Apr 27, 2018
    Messages:
    3,664
    Country:
    United Kingdom
    I`m discontinuing Switchboot. All the extra features are in Fusee-Suite. Then you can run Hekate or whatever.

    FuseeSuite doesn`tg require upgrading :)
     
  3. Gismor

    Gismor GBAtemp Regular
    Member

    Joined:
    Nov 12, 2018
    Messages:
    115
    Country:
    Germany
    okay thanks than i will try to flash with fuseesuite ;)
     
    mattytrog likes this.
  4. Koksi__

    Koksi__ Advanced Member
    Newcomer

    Joined:
    Jun 27, 2016
    Messages:
    82
    Country:
    Austria
    @mattytrog
    Hi there.
    I have installed the RCMx86 in my switch and am actually quite satisfied, if the battery becomes too weak and the switch turns itself off, I have a problem.
    When I plug in the charger, nothing happens, I always took out the SD card, went to the switchboot menu and loaded from there.
    And when the charger is connected, I can't start at all.
    Another question:
    Does Fusee Suite also have advantages for me as a internal Modchip user?
     
  5. scou

    scou Newbie
    Newcomer

    Joined:
    Sep 13, 2018
    Messages:
    5
    Country:
    United Kingdom
    @mattytrog

    hi there... its been a while since ive updated my switch (since v6.0.0 lol) so im just getting back into the game...
    i actually got a message off you through my ebay shop when i was offering the service of soldering in trinkets using the old 4 wire only method. you had mentioned that things had come a long way since the beginning and that i should update stuff... that was probably last year sometime...nintendo themselves shut me down not long after this and my switch has remained on a shelf ever since...

    ok its 2020 :P and now ive re soldered my trinket using the 7 wires.. so i have a usb strap (not fully sure what its doing but its there) i have the joycon strap (no idea why i didnt do this the first time because its so much better) and i HAD the vol+ strap.,..

    the reason i say HAD... is because when i had it connected i lost all control of the volume. regardless of which pad i used... it was like it was always just activating the vol+ .... is this just how it is?

    ive tried the switchboot (perma and dualboot) and now since seeing the comment above- im using the fusee bootloader...

    am i missing something? otherwise as before thanks for the great work- everything else is working beautifully for me! just a few things im not sure of..

    take it easy
    scou
     
  6. mmedeiro

    mmedeiro Member
    Newcomer

    Joined:
    Dec 26, 2016
    Messages:
    25
    Country:
    United States
    Hi, I installed the Trinket M0. Checked all my solder points. RCM strap works, the chip flashes purple, then yellow several times then red and doesn't boot. I put the fusee payload on the root of the SD card and named it payload.bin... any ideas?
     
  7. edwardsalazar97

    Newcomer

    Joined:
    Jul 11, 2019
    Messages:
    46
    Country:
    Colombia
    Good morning @mattytrog, I have my chip installed for a long time and I constantly update it with switchboot, and it works perfectly, it injects the payload without problem, but in the last update it generates problems with usb installations, and I have to go back to an old version and it works without problems, you know what it can be?
     
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - SWITCHBOOT_UF2, [Trinket], FUSEE_UF2