Theory...Ok, they seem random reboots...
Sometimes the power off option reboots the console, other it power off as espected. Sorry.
It all depends on what i2c data the MAX77620 is sending out / receiving.Full reboot. Starting horizon...
It happens randomly, from hekate paylad, sxos payload and one time from power off menu on emunand...
Don´t worry about it but it's strange...
You should already have a hekate_ipl.ini if you boot from hekate menu.Could be that option hardcoded?
I wish not to put any extra file in the SD...
Version 0.9.7: Online
Changelog:
- Long-press vol+ to change payload / mode / modchip settings / reset modchip settings. See flowchart in post above.
If not use vol + strap with switch boot, is possible solder on vol - ?
You can add it to any pad you like. All it needs is touching to gndIf not use vol + strap with switch boot, is possible solder on vol - ?
Or adding one with not used pin ? ( accessory button )
WoWView attachment 156957 A new mode coming in 0.9.8. Selectable with long-press vol. Replaces the autoincrease modes as nobody uses them anyway.
All gfx is in /bootloader with Hekate stuff to keep things tidy. Uses bootlogo.bmp as background same as Hekate. So configuration is a minimum. Just on test at the moment.
Just use Trinket_Rebug. After flashing, give it 10 seconds before unplugging.I've added the usb strap but i think i've screwed up the flashing proces by flashing the wrong uf2 lol. What is the correct way to get my adafruit trinket running the latest firmware? Switchboot is still recognized in (in my case) MacOS. I have all straps fitted.
Just use Trinket_Rebug. After flashing, give it 10 seconds before unplugging.
Hmm no idea what is screwed now. It was injecting after i added the usb strap. It stopped injecting after i accidentally flashed "TRINKET_GENERIC_DONGLE_SIMPLE_UF2_V097.UF2". I reflashed it with "TRINKET_REBUG_SIMPLE_UF2_V097.UF2" but no bueno.
edit: holding vol+ boots me to v0.9.7 hekate
edit edit: oh its injecting if i hold vol+. Guess i have to update some settings.
last edit: i cannot get auto inject working anymore :/. I've enabled it in Hekate but i keep having to press vol+ to inject my payload.
You have vol+ strap connected?
You want permanent CFW boot?
You need to flash SWITCHBOOT...
https://github.com/mattytrog/SWITCHBOOT_UF2_BOOTLOADERS/blob/master/Joycon and Volume Control/Trinket/SWITCHBOOT_TRINKET_JOYCON_VOLUME.ino
Then this...
https://github.com/mattytrog/Simple...F2_v097/UF2/TRINKET_REBUG_SIMPLE_UF2_V097.UF2
That would do it XDMy vol+ strap had a bad solder joint on the chip xD
Bad download. Make sure it is 512kbAnyone else unable to update?
went to 0.95 a while back now went to update to 0.97, can see the switchboot drive but when i copy the uf2 over it does nothing, it shows as copied but the trinket m0 does nothing and just continues to sit there