Also this is what's inside emunand that's in sxos.
Looks like file partition
Also this is what's inside emunand that's in sxos.
Disk Management can't see the Switch drive, I'm connecting with DBI MTP responder.Check under computer disc management, if there is unallocated space it is hidden partition
The only negative repercussion I can think of is that you will never ever be able to recover that emuMMC to use with SX OS ever again.Disk Management can't see the Switch drive, I'm connecting with DBI MTP responder.
Post automatically merged:
And this is inside Switch/External SD card
So in conclusion, is it safe to delete sxos folder here since I'm using Atmos? Will there be negative repercussion in the future in any way?
All of this happened because you used a bad title installer. I'd highly recommend deleting the one you currently have and switching to TinWoo Installer. Its what I personally use and I never have any issues while using it.So I was using my hacked switch just fine and today I decided to download persona 5 royal. I connected to different wifi and didn't configure it in any way, just went to tinfoil, added new store and downloaded persona 5. Now I see that game's icon got an infinite loading spinner and I cannot launch it. I got also an error 2181 4008 which means switch got banned permanently. Also switch asks for installing downloaded system update before every game launch. How to make it not ask for installing update? How did switch get banned? And how to get rid of infinite loading spinner on game? I can launch game like Zelda now but mk11 asks to turn off air plane mode but it never asked for it before
emuMMC by default uses a different Nintendo folder than sysMMC. From here, you have 2 options. You can either have emuMMC and sysMMC use the same Nintendo folder or copy the data from your sysMMC's Nintendo folder to the one used by emuMMC. The former will save you more space on your SD card but some people are paranoid it may lead to a ban since they typically install pirated content on emuMMC which isn't the case since pirated and legit content appear identical in the Nintendo folder. The latter will cost you more room on your SD card but it also allows you to have a separate game library for emuMMC and sysMMC.I have modded my switch and am using emummc but after setting it up all my games are archived on the emummc. Everything is installed normally on the ofw.
Boot into Maintenance Mode to clear out the pending system update.My switch asked and downloaded update when connected to new wifi. Now it even asks to do this update before launching every game. And also cannot launch mk11 as it asks for internet connection now.
You should be able to yes as long as everything else is setup properly. You will have to reinstall the game. You can delete it from Data Management under System Settings.After that I'll be able to launch games as I did before? And also what do I do about game I just installed? It has an infinite loader instead lf icon.
Disk Management can't see the Switch drive, I'm connecting with DBI MTP responder.
Post automatically merged:
And this is inside Switch/External SD card
So in conclusion, is it safe to delete sxos folder here since I'm using Atmos? Will there be negative repercussion in the future in any way?
I guess everything happened bc I connected to new wifi and didn't configure it. Now I need to delete pending update and then I can use tinfoil again? Or I'll need to reinstall jailbreak?You should be able to yes as long as everything else is setup properly. You will have to reinstall the game. You can delete it from Data Management under System Settings.
No, I recommend using a different title installer entirely or else you risk this happening all over again which is why I linked you TinWoo Installer earlier. Also, its not a jailbreak. You only jailbreak Sony consoles and iPhones. We are hacking the Nintendo Switch, not jailbreaking it, and the hack was never installed in the first place either. You need to perform the hack every time you turn the console off.I guess everything happened bc I connected to new wifi and didn't configure it. Now I need to delete pending update and then I can use tinfoil again? Or I'll need to reinstall jailbreak?
I liked tinfoil bc I can just install games from Switch without using pc. As I understood I'll need it if I use TinWoo. Is there any alternative?No, I recommend using a different title installer entirely or else you risk this happening all over again which is why I linked you TinWoo Installer earlier. Also, its not a jailbreak. You only jailbreak Sony consoles and iPhones. We are hacking the Nintendo Switch, not jailbreaking it, and the hack was never installed in the first place either. You need to perform the hack every time you turn the console off.
You don't need a computer to install .NSP files with TinWoo. It can install from a HDD, from the Internet via URL, or via Google Drive.I liked tinfoil bc I can just install games from Switch without using pc. As I understood I'll need it if I use TinWoo. Is there any alternative?
My bad, I forgot to go over how to to do that. You open the emummc.ini file and have it point towards the Nintendo folder used by sysMMC which will usually be on the root of your SD card.How would I make emummc use the same nintendo folder as sysmcc?
I haven't used my switch in a while and after updating the CFW and using hakate, I boot directly into my Atmosphere emmc instead of the hakate ipl menu. I'm not sure if this was supposed to happen but I just wanted to ask to make sure.
[config]please post the contents of your /bootloader/hekate_ipl.ini.
How did you upgrade your Switch (which guide or tool?)
this looks great.[config]
autoboot=0
autoboot_list=0
bootwait=3
backlight=100
autohosoff=0
autonogc=1
updater2p=0
bootprotect=0
[Atmosphere CFW]
payload=bootloader/payloads/fusee.bin
icon=bootloader/res/icon_payload.bmp
[Stock SysNAND]
fss0=atmosphere/package3
stock=1
emummc_force_disable=1
icon=bootloader/res/icon_switch.bmp
I used the rentry guide for updating my switch.
Please ensure you got your Sigpatches from here:Greetings.
I'm having problems installing certain games on my switch. When I try to it gives me this Error Code: 2168-0001 (0x2a8) and I have to reboot.
The games in question are: Anno Mutationem, Koumajou Remilia Scarlet Symphony, The Legend of Zelda Links Awakening & Pokemon Arceus (all NSZ format)
For context, someone else tried to install them previously, but I think the sigpatches weren't updated and thus couldn't get them to install.
I recently updated the firmware (15.0.0) and CFW (Atmosphere 1.4.1). I made sure to also update the sigpatches, hekate & fusee.bin (by downloading all necesary files directly from their respective githubs and manually placing the files on the SD) and to test it I installed Metroid Prime Remastered without issue (using Awoo installer) so I don't really know what else to do.
Thanks in advance!
Have you tried to extract the NSZ files to NSP, then install. Some installers won't install NSZ. SAK (Swiss Army Knife) is a great tool for this. https://github.com/dezem/SAK/releases/tag/0.7.11Greetings.
I'm having problems installing certain games on my switch. When I try to it gives me this Error Code: 2168-0001 (0x2a8) and I have to reboot.
The games in question are: Anno Mutationem, Koumajou Remilia Scarlet Symphony, The Legend of Zelda Links Awakening & Pokemon Arceus (all NSZ format)
For context, someone else tried to install them previously, but I think the sigpatches weren't updated and thus couldn't get them to install.
I recently updated the firmware (15.0.0) and CFW (Atmosphere 1.4.1). I made sure to also update the sigpatches, hekate & fusee.bin (by downloading all necesary files directly from their respective githubs and manually placing the files on the SD) and to test it I installed Metroid Prime Remastered without issue (using Awoo installer) so I don't really know what else to do.
Thanks in advance!
wydm it looks great? I can't boot into the hakate menu because when I inject the payload, I automatically enter the emummc.this looks great.
please boot into Hekate and tap the eMMC tab on the far right and then take a screenshot and post it here.
Post automatically merged:
Please ensure you got your Sigpatches from here:
Sigpatches (GBATemp) — get your Sigpatches here!
please post the contents of your /bootloader/hekate_ipl.iniSorry if this has been asked, but I don't find any kind of info anywhere. I installed a copy of Brilliant Diamond via Awoo Installer, it seems there was some kind of error while installing and the switch gave me a blue error message, after that, my console boots into hekate just well but when I try to boot up into atomosphere all that happens is a black screen
wydm it looks great? I can't boot into the hakate menu because when I inject the payload, I automatically enter the emummc.