Right now there is nothing you can do without seeprom or otp.bin. read my guide in my signature. As mentioned earlier there is a well respected member of the exploit community that is currently working on obtaining access to areas of The Wii U that may help you in the future. As of right now, even with a teansy, there is nothing you can doHello, I have a question . Since I have not completely followed the course, I hope someone can give me an answer. I have a working wii u with haxchi / ds game and a second wii u which has been formatted (160-0101). Can I do a complete mirroring from 1 to 2?
Thank you for your support
You shouldn't have installed CBHC to USB. But all is not lost. Buy a teensey++ 2.0 and read my unbrick guide. It's in my signature.Hello
I have a bricked Wii U here after CBHC Cooldboot.
After install a game to USB the Wii start in the short menu but doesnt start to system or normal menu hanging in the autobootscreen and display say -5 or without a SD card -3.
I make a backup before CBHC from the nand : opt, seeprom,slc,slccmpt,mlc part 1-3 (4 was withfailure).
Now i have a chance to repair the Wii U?
Sry for my bad English
CBHC should always be installed to nand. You can't install it to SDOnly with teensey++ 2.0?
Wich from this is i need for repair : opt, seeprom,slc,slccmpt,mlc?
I dont have CBHC install on the usb only on SD.
Thanky you for answer
If you get -5/-3 it means that CBHC is working but fails to load some file from the SD. what was your autoboot option? did you have mocha?Hello
I have a bricked Wii U here after CBHC Cooldboot.
After install a game to USB the Wii start in the short menu but doesnt start to system or normal menu hanging in the autobootscreen and display say -5 or without a SD card -3.
I make a backup before CBHC from the nand : opt, seeprom,slc,slccmpt,mlc part 1-3 (4 was withfailure).
Now i have a chance to repair the Wii U?
Sry for my bad English
Are you able to get to the CBHC menu by tapping the home button on boot? Wait until you see some text on your gamepad while cold booting and then press home. You should be able to change your autoboot option to system menuHello
I have a bricked Wii U here after CBHC Cooldboot.
After install a game to USB the Wii start in the short menu but doesnt start to system or normal menu hanging in the autobootscreen and display say -5 or without a SD card -3.
I make a backup before CBHC from the nand : opt, seeprom,slc,slccmpt,mlc part 1-3 (4 was withfailure).
Now i have a chance to repair the Wii U?
Sry for my bad English
If you get -5/-3 it means that CBHC is working but fails to load some file from the SD. what was your autoboot option? did you have mocha?
Are you able to get to the CBHC menu by tapping the home button on boot? Wait until you see some text on your gamepad while cold booting and then press home. You should be able to change your autoboot option to system menu
That's a HaxChi config not CBHC. If CBHC is working you should be able to get to the config menu by pressing home button once when you see the words "autobooting" on the gamepad.My autoboot option :
a=fw.img
b=wiiu/apps/homebrew_launcher/homebrew_launcher.elf
default=sysmenu
mocha was installed before CBHC
--------------------- MERGED ---------------------------
Doesnt work
I don't think you can replace chips as there is an hmac check? i am not sure how that works. Even if it worked you would need a backup from a donor console from both SLC and MLC. And that is all assuming you got otp/seeprom dumped + knows how to do it.Hello. Please help. When the system was updated, the lights were turned off. There was an error 160-0103. The NAND is damaged, when reading, it gives an error of 97%.
PLEASE, give backup 8GB NAND. I want to try to update through a hex editor and fill it with a new NAND chip (not damaged).
About the fact that the dump does not fit, I understand.
Also, I'm saving the data security (it's not getting farther from my computer).
Sorry for the bad english. I work through an interpreter.
Take a look at Wii U NAND Tools. That might be what you're looking for.how to get the full files to full renand, or have some application that fixes a corrupted nand...
installed it. for some reason the wii u doesn'T turn on anymore. the LED stays red
--------------------- MERGED ---------------------------
nvm.
attempting to dump it results in this error:
View attachment 93426