Picofly AIO Thread

[JackFrostSMT]

I'm sorry to ask this but I can't find a way to run atmosphere. I'm on 16.0.1 and running hekate v6.0.2 with no problem. I installed HATS 16.0.1 on the microsd but I don't see the fuse.bin in the payloads. I downloaded atmosphere from its developers' page and copied the fuse.bin to the bootloader/payloads folder but when I run it it gives me a error... I really don't know what else to do. Any ideas?

Did you flash the unlock?

 

[Darkspade]

I'm sorry to ask this but I can't find a way to run atmosphere. I'm on 16.0.1 and running hekate v6.0.2 with no problem. I installed HATS 16.0.1 on the microsd but I don't see the fuse.bin in the payloads. I downloaded atmosphere from its developers' page and copied the fuse.bin to the bootloader/payloads folder but when I run it it gives me a error... I really don't know what else to do. Any ideas?

you should be under Launch tab.. SYS - cfw and Emu -cfw

 

[papafria]

Did you flash the unlock?

I have flashed the only the PiCoFly FW2.5+unlock.uf2 that i supoused that have the unlock... But i dont know how to launch Atmosphere my friend!

 

[JackFrostSMT]

I have flashed the only the PiCoFly FW2.5+unlock.uf2 that i supoused that have the unlock... But i dont know how to launch Atmosphere my friend!

Try launching OFW sysnand with hekate and see if it boots. If not, its probably the unlock that failed. I flashed 2.5 and unlock separately

 

[papafria]

Try launching OFW sysnand with hekate and see if it boots. If not, its probably the unlock that failed. I flashed 2.5 and unlock separately

I am able to reboot in original firmware without any problems... But i dont know how to launch Atmosphere... to launch atmosphere, don't you have to run the payload fuse.bin?

Post automatically merged: Mar 31, 2023

Try launching OFW sysnand with hekate and see if it boots. If not, its probably the unlock that failed. I flashed 2.5 and unlock separately

Thanks my friend.. That solves my problem... I have to separately flash unlock and atmosphere runs without any problems.. Thanks a lot for all your Information... I am now here to help to anyone that have a problem!!!! I have instaled the picoflash in a nintendo switch v2.. If anyone have any problem.., i am here to help!

 

[NetYaroze]

Sono in grado di riavviare nel firmware originale senza problemi... Ma non so come lanciare Atmosphere... per lanciare atmosphere, non devi eseguire il payload fuse.bin?
[unione automatica]1680224509[/unione automatica]

Grazie amico mio.. Questo risolve il mio problema... Devo sbloccare separatamente il flash e l'atmosfera funziona senza problemi.. Grazie mille per tutte le informazioni... Ora sono qui per aiutare chiunque abbia un problema!! !! Ho installato il picoflash in un nintendo switch v2 .. Se qualcuno ha qualche problema .., sono qui per aiutarti!

So are there any problems using the 2.5 + unlock package?

 

[Ernestino]

Q: Will the RP2040-One work?
A: Yes

Can`t get it to work on switch lite..
I`m using SX v2 cpu flex cable.
One blink on power on - that`s it.

 

[Dee87]

Q: Will the RP2040-One work?
A: Yes

Can`t get it to work on switch lite..
I`m using SX v2 cpu flex cable.
One blink on power on - that`s it

what color did u get when u flashed it ?

what firmware did u use?

What color do u get when u boot the console?

lets see some pictures of the install

 

[Adran_Marit]

I'm sorry to ask this but I can't find a way to run atmosphere. I'm on 16.0.1 and running hekate v6.0.2 with no problem. I installed HATS 16.0.1 on the microsd but I don't see the fuse.bin in the payloads. I downloaded atmosphere from its developers' page and copied the fuse.bin to the bootloader/payloads folder but when I run it it gives me a error... I really don't know what else to do. Any ideas?

I'm sorry that's more of a cfw issue than a rp2040 issue from the sounds. I suggest asking in the noob thread

edit: ignore me, my page didnt load properly

Post automatically merged: Mar 31, 2023

Q: Will the RP2040-One work?
A: Yes

Can`t get it to work on switch lite..
I`m using SX v2 cpu flex cable.
One blink on power on - that`s it.

It might be the device ID issue that affects some of the zeros, but I have personally seen installs with the rp2040-one working

 

[Ernestino]

I'm sorry that's more of a cfw issue than a rp2040 issue from the sounds. I suggest asking in the noob thread

edit: ignore me, my page didnt load properly

Post automatically merged: Mar 31, 2023

It might be the device ID issue that affects some of the zeros, but I have personally seen installs with the rp2040-one working

I` m quite sure soldering is OK.
Tried different uf2 files...
I think it must be related with device ID, maybe it will be changed in v2.6.

 

[l7777]

Is it possible that SOMEBODY PLEASE shares all necessary parts (as a SHOP-LINK) for this Project to avoid any mistakes?
I mean, I would like to mod my Switch Lite and my Switch OLED, but I dont have any idea, what flex-cables and other parts I need (besides the resistors and the RP2040 board)

So you have the tools and skill to micro-solder everything but you can't determine what parts are needed from the first post?

At present there is no package you can purchase with all the pieces together.

 

[dewolf]

Is it possible that SOMEBODY PLEASE shares all necessary parts (as a SHOP-LINK) for this Project to avoid any mistakes?
I mean, I would like to mod my Switch Lite and my Switch OLED, but I dont have any idea, what flex-cables and other parts I need (besides the resistors and the RP2040 board)

here a full step by step guide to install (into descrpition of the video you can find all equipment )

 

[meha]

A little question.
I used combined firmware from github but it didn't work so i had to run picofly_tb.bin from hekate (since i already removed the port).
I saw that unlock.bin was bugged and rehius removed it.
atmosphere works fine but do i have to restore the boot partition or am i just fine?

 

[Adran_Marit]

A little question.
I used combined firmware from github but it didn't work so i had to run picofly_tb.bin from hekate (since i already removed the port).
I saw that unlock.bin was bugged and rehius removed it.
atmosphere works fine but do i have to restore the boot partition or am i just fine?

If you can still boot stock you should be fine

 

[Delboyyy]

Any one use this solder chip on swich lite? is that work?

View attachment 361550

Im also wondering the same thing? Can anyone confirm this is the way the mosfet is installed on the Lite? Checked those diagrams over and over and my brain is fried

 

[Dee87]

Any one use this solder chip on swich lite? is that work?

View attachment 361550

since switch lite has a mariko board yes u can do that way or u just solder it like this without the wires.
if u do it the way its in the picture below and u desolder the cap u MUST Isolate the bottom pad with UV Mask

 

[cicci084]

Hi guys. Where can I buy everything I need at a good price?

Post automatically merged: Apr 1, 2023

hi guys, Where can I buy everything I need at a good price?

 

[Dee87]

Hi guys. Where can I buy everything I need at a good price?

if u want it really cheap aliexpress

 

[xXDungeon_CrawlerXx]

So, which and how many parts to I need for a Switch Lite and Switch OLED?
I do already got four RP2040-Zeros when this type of Mod was announced first but never looked deeper into it until now.

Spoiler: RP2040-Zeros

The Guide tells I need "SMD 8050 47 to 50 ohm Resistors". Do I need 47 AND 50 ohm Resisters or would 47 ohm Resistors be enough? How many do I need?
I found these on Reichelt.de, would this be the correct ones?

I also found this IRFHS8342 MOSFET on Reichelt.de, would be this the correct one?
When it comes to " cpu flex cable", which one would you suggest? Could you send me a link to it? (would need one for my Lite switch and one for my OLED Switch)

Thank you very much in advance

 

[Hayato213]

So, which and how many parts to I need for a Switch Lite and Switch OLED?
I do already got four RP2040-Zeros when this type of Mod was announced first but never looked deeper into it until now.

Spoiler: RP2040-Zeros

The Guide tells I need "SMD 8050 47 to 50 ohm Resistors". Do I need 47 AND 50 ohm Resisters or would 47 ohm Resistors be enough? How many do I need?
I found these on Reichelt.de, would this be the correct ones?

I also found this IRFHS8342 MOSFET on Reichelt.de, would be this the correct one?
When it comes to " cpu flex cable", which one would you suggest? Could you send me a link to it? (would need one for my Lite switch and one for my OLED Switch)

Thank you very much in advance

47-50 ohm, so you can use like 47 ohm resistors.