Hacking Hardware Picofly - a HWFLY switch modchip

[thesjaakspoiler]

is there bluetooth part can fix or replace inside nintendo switch v1 coz every time disconect joycon from console it is not connect wiresless or bluetooth same every nintendo switch. wifi is working fine so what happend!!!!

Wifi and Bluetooth are the same chip so if wifi is working then probably the chip itself will be fine.
Check for damage around the metal CPU shield if you have a picofly/hwfly.
When removing the shield, there might have been some accidental damage to the PCB.
If found a picture for the OLED board but search the forum for other models.

 

[Danook28]

Wifi and Bluetooth are the same chip so if wifi is working then probably the chip itself will be fine.
Check for damage around the metal CPU shield if you have a picofly/hwfly.
When removing the shield, there might have been some accidental damage to the PCB.
If found a picture for the OLED board but search the forum for other models.

View attachment 498499

use back mosfet no cut sheld v1 erista.

 

[Danook28]

there are 2 or 3 type of oled motherboard dat0 so becarefull when grind dat0 place some time you need do it up little bit near 4.7 k OHm resistor line some type motherboard is dowen littel bit that line but street that 3 dot in video youtu.be stalthex man. thank you. info for help.

 

[Mr Skinner]

This B Point in Nintendo switch oled, can be used as an alternative RST point ?
I'm trying not to have to completely disassemble the console, since I now master the kamikaze method.

 

[cowboy619]

Installing a Picofly Tiny in a V2 after it glitches the chiip works great but does not shutdown after glitching - running 2.80. Anything i should check

 

[LuigiGad]

This B Point in Nintendo switch oled, can be used as an alternative RST point ?
I'm trying not to have to completely disassemble the console, since I now master the kamikaze method.

View attachment 500107

that is the alternative RST point to do the installation completely from one side only without disassembling the motherboard

 

[Danook28]

nintendo switch orange screen reson???

 

[LuigiGad]

nintendo switch orange screen reson???

kamikaze?

 

[Danook28]

kamikaze?

no unpatched v1. 19.0.1

 

[Mr Skinner]

no unpatched v1. 19.0.1

There are several indicators, but this error is common for the wifi/bluetooth IC. One way to isolate it is to try to replicate the error in airplane mode off. If the error does not occur with it off, the problem is the wifi/bluetooth IC. I solved the problem of a switch by reflowing this chip. I have not had any orange screen problems since.

 

[Danook28]

View attachment 500517
There are several indicators, but this error is common for the wifi/bluetooth IC. One way to isolate it is to try to replicate the error in airplane mode off. If the error does not occur with it off, the problem is the wifi/bluetooth IC. I solved the problem of a switch by reflowing this chip. I have not had any orange screen problems since.

the iron ball size 0.20 mm??? is same 0.2 mm????

 

[Mr Skinner]

the iron ball size 0.20 mm??? is same 0.2 mm????

I don't know really. But a simple reflow worked to me.

 

[Danook28]

I don't know really. But a simple reflow worked to me.

temp hot air and time.

 

[CptanPanic]

Are the circled cables what I need to connect for a Lite with this 3in1? Anyone know of a picture showing this board connected in a Lite?

 

[malgamer]

Are the circled cables what I need to connect for a Lite with this 3in1? Anyone know of a picture showing this board connected in a Lite?

View attachment 501771

lite fpc

 

[CptanPanic]

lite fpc

So learning more, it looks like I need the one that says "Lite FPC" and the one that says OLED V6 right?

 

[Cristiano04]

Hello, gentlemen, I ripped off the SMD when I was soldering the RST Point, when I tried to put it back I ended up damaging the track, is there any way to get around this?
Sorry for the English, I'm using Google Translate.

 

[Danook28]

what this erorr meaning.. picofly chip..

 

[LuigiGad]

what this erorr meaning.. picofly chip..

It does not depend on the chip, probably the resistance on the CMD point is damaged.

 

[Cristiano04]

Is there an application or website that helps find interaction between the points of the Nintendo Switch board circuit?