What do you mean? Like turn it on and off checking the error code? I can get two to work with the mosfets I have but never 1. Could the wiring be too thin?
1 is enough i have never had any device return to me yet. Your wire size is sufficient . i use 0.2mm magnet wire too. I meant that you check the reading on that mosfet the drain ever be grounded or the gate ever have any reading.
1 is enough i have never had any device return to me yet. Your wire size is sufficient . i use 0.2mm magnet wire too. I meant that you check the reading on that mosfet the drain ever be grounded or the gate ever have any reading.
The mosfet type is ok. I have at least 30 installs now with the same mosfet and always in single configuration.
One thing I always do is that I pre-tin the wire in the places where it's going to be soldered to make sure that the enamel coating is gone. A little blob of solder on the tip of the iron (400°) and a little bit of flux on the specific spot on the wire, hold the wire inside solder blob for a couple of seconds (it turns black then evaporates) and you are good to go.
The mosfet type is ok. I have at least 30 installs now with the same mosfet and always in single configuration.
One thing I always do is that I pre-tin the wire in the places where it's going to be soldered to make sure that the enamel coating is gone. A little blob of solder on the tip of the iron (400°) and a little bit of flux on the specific spot on the wire, hold the wire inside solder blob for a couple of seconds (it turns black then evaporates) and you are good to go.
Same one 0.2mm. In the photo I was trying out different mosfets but as you can see the wiring is the same. I don't know, it's weird, everything looks ok...
Same one 0.2mm. In the photo I was trying out different mosfets but as you can see the wiring is the same. I don't know, it's weird, everything looks ok...
Those all have continuity. 1 to 1 and 1-2. 3 had an ohms reading of 14. #3 was solder.
Post automatically merged:
I’m curious though. Source and drain are being connected to ground points on the apu. The caps we connect to is the ground side.
Post automatically merged:
Point 3 is not soldered to the shield like it looks. Was just sitting on top.
Post automatically merged:
There has been progress. Someone suggested to me about pulling a mosfet from a v1 flex and it worked the first time! Idk if maybe I got a bad batch of mosfet but I’ll be either ordering more or ordering some of the ones from the v1 flex. Here are the mosfets if anyone is interested.
Those all have continuity. 1 to 1 and 1-2. 3 had an ohms reading of 14. #3 was solder.
Post automatically merged:
I’m curious though. Source and drain are being connected to ground points on the apu. The caps we connect to is the ground side.
Post automatically merged:
Point 3 is not soldered to the shield like it looks. Was just sitting on top.
Post automatically merged:
There has been progress. Someone suggested to me about pulling a mosfet from a v1 flex and it worked the first time! Idk if maybe I got a bad batch of mosfet but I’ll be either ordering more or ordering some of the ones from the v1 flex. Here are the mosfets if anyone is interested.
hi, can someone send me a diagram of where data + and data - are on the rp2040 zero to hook up a usb 2 cable to reprogram? I have an orange light on bootup and no CFW loading
Trying the single mosfet again. Is this how it is supposed to look? When I put it all together my error code was ==*. Drain and Source are grounded but not touching. Is that right?
After several months of work, the Harbour Masters 64 team have released their first public build of 2Ship2Harkinian, a feature-rich Majora's Mask PC port. This comes...
It's been a while since Microsoft released the Xbox One, and despite its age, there haven't been any reliable softmod methods to hack the console. Until now. A post...
With the vast success of Super Mario Maker and its Switch sequel Super Mario Maker 2, Nintendo fans have long been calling for "Maker" titles for other iconic genres...
Palmer Luckey is known for his pursuits into the world of virtual reality, having founded Oculus and designed the Rift VR headset. Prior to the $2 billion dollar...
Another day, another Nintendo DMCA takedown against fan-made content.
Just a few minutes ago, Nintendo issued a DMCA takedown notice against a widely known and...
After a little more than three years of exclusivity with the Epic Games Store, Square Enix has decided to bring their beloved Kingdom Hearts franchise to Steam. The...
Sony is once more attempting to reintroduce players to their older library of games by re-releasing classic PlayStation 2 titles onto the PlayStation Store. During...
Skyward Sword is a divisive title in the Zelda series. Hailed with praise at launch with a 93 Metacritic average, the game since received criticism for the...
The latest State of Play is here. This is PlayStation's Summer showcase, providing updates to new updates on upcoming games and brand new reveals. The 35-minute...
Nintendo is having quite the successful console generation with the Nintendo Switch, and with the follow-up to the Switch already on the horizon confirmed by...
Palmer Luckey is known for his pursuits into the world of virtual reality, having founded Oculus and designed the Rift VR headset. Prior to the $2 billion dollar...
It's been a while since Microsoft released the Xbox One, and despite its age, there haven't been any reliable softmod methods to hack the console. Until now. A post...
After several months of work, the Harbour Masters 64 team have released their first public build of 2Ship2Harkinian, a feature-rich Majora's Mask PC port. This comes...
Another day, another Nintendo DMCA takedown against fan-made content.
Just a few minutes ago, Nintendo issued a DMCA takedown notice against a widely known and...
After a little more than three years of exclusivity with the Epic Games Store, Square Enix has decided to bring their beloved Kingdom Hearts franchise to Steam. The...
Sony is once more attempting to reintroduce players to their older library of games by re-releasing classic PlayStation 2 titles onto the PlayStation Store. During...
With the vast success of Super Mario Maker and its Switch sequel Super Mario Maker 2, Nintendo fans have long been calling for "Maker" titles for other iconic genres...
The latest State of Play is here. This is PlayStation's Summer showcase, providing updates to new updates on upcoming games and brand new reveals. The 35-minute...
E3 may be gone, but it's not forgotten, as the trend of a massive Summer video game showcase still lives on in the form of the Summer Game Fest. Promising two hour of...
The complete source code for the Super Nintendo Entertainment System (SNES) version of Doom has been released on archive.org. Although some of the code was partially...