I got my hands on a n3DS today, firmware 9.0E. I setup OoT, backed up my NAND and formatted EmuNAND. I then followed the instructions from the Gateway site.
At step 8 of the instructions:
When I load the DS Profile, nothing happens.
I thought it might have had something to do with the NANDs being linked, so I did a system format in emuNAND. This didn't fix anything - instead I got a black screen when booting to emuNAND. I re-formated emuNAND and that's working, but I still don't have the DS profile exploit working.
While going through the system settings to launch the system format, I did notice that the settings were different to those from sysNAND. It looks like the exploit was installed on emuNAND, but not sysNAND.
What do I do the properly install the exploit? Any help would be greatly appreciated
1) Copy the Gateway 3DS 3.2.0 ULTRA Launcher.dat to your New 3DS microSD card
2) Copy mset_<region>.cia to your New 3DS microSD card (where <region> is your console region)
3) Copy "DevMenu.3ds" to your Gateway 3DS microSD card.
4) Boot into the Gateway menu with your preferred entrypoint (Zelda or Cubic Ninja)
5) Select the new "NVRAM INSTALL" option from the menu, proceed with installation.
6) Once installed, boot into Gateway mode and launch DevMenu.3ds from the multirom menu (press SELECT)
7) Start DevMenu and import mset_<region>.cia from your SD card.
At step 8 of the instructions:
8) Reboot console and verify you can now boot into Gateway mode with the classic System Settings DS Profile method. (Settings -> Profile -> Nintendo DS profile)
When I load the DS Profile, nothing happens.
I thought it might have had something to do with the NANDs being linked, so I did a system format in emuNAND. This didn't fix anything - instead I got a black screen when booting to emuNAND. I re-formated emuNAND and that's working, but I still don't have the DS profile exploit working.
While going through the system settings to launch the system format, I did notice that the settings were different to those from sysNAND. It looks like the exploit was installed on emuNAND, but not sysNAND.
What do I do the properly install the exploit? Any help would be greatly appreciated